From: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
Signed-off-by: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
---
drivers/s390/char/sclp.c | 8 +++-----
drivers/s390/char/sclp_con.c | 2 --
drivers/s390/char/sclp_config.c | 4 +---
drivers/s390/char/sclp_cpi_sys.c | 12 ++----------
drivers/s390/char/sclp_quiesce.c | 8 +-------
drivers/s390/char/sclp_rw.c | 2 --
drivers/s390/char/sclp_sdias.c | 4 +---
drivers/s390/char/sclp_tty.c | 8 --------
drivers/s390/char/sclp_vt220.c | 7 +------
9 files changed, 9 insertions(+), 46 deletions(-)
Index: quilt-2.6/drivers/s390/char/sclp.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp.c
+++ quilt-2.6/drivers/s390/char/sclp.c
@@ -784,11 +784,9 @@ sclp_check_handler(__u16 code)
/* Is this the interrupt we are waiting for? */
if (finished_sccb == 0)
return;
- if (finished_sccb != (u32) (addr_t) sclp_init_sccb) {
- printk(KERN_WARNING SCLP_HEADER "unsolicited interrupt "
- "for buffer at 0x%x\n", finished_sccb);
- return;
- }
+ if (finished_sccb != (u32) (addr_t) sclp_init_sccb)
+ panic("sclp: unsolicited interrupt for buffer at 0x%x\n",
+ finished_sccb);
spin_lock(&sclp_lock);
if (sclp_running_state == sclp_running_state_running) {
sclp_init_req.status = SCLP_REQ_DONE;
Index: quilt-2.6/drivers/s390/char/sclp_con.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_con.c
+++ quilt-2.6/drivers/s390/char/sclp_con.c
@@ -20,8 +20,6 @@
#include "sclp_rw.h"
#include "sclp_tty.h"
-#define SCLP_CON_PRINT_HEADER "sclp console driver: "
-
#define sclp_console_major 4 /* TTYAUX_MAJOR */
#define sclp_console_minor 64
#define sclp_console_name "ttyS"
Index: quilt-2.6/drivers/s390/char/sclp_config.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_config.c
+++ quilt-2.6/drivers/s390/char/sclp_config.c
@@ -74,10 +74,8 @@ static int __init sclp_conf_init(void)
INIT_WORK(&sclp_cpu_change_work, sclp_cpu_change_notify);
rc = sclp_register(&sclp_conf_register);
- if (rc) {
- printk(KERN_ERR TAG "failed to register (%d).\n", rc);
+ if (rc)
return rc;
- }
if (!(sclp_conf_register.sclp_send_mask & EVTYP_CONFMGMDATA_MASK)) {
printk(KERN_WARNING TAG "no configuration management.\n");
Index: quilt-2.6/drivers/s390/char/sclp_cpi_sys.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_cpi_sys.c
+++ quilt-2.6/drivers/s390/char/sclp_cpi_sys.c
@@ -126,21 +126,15 @@ static int cpi_req(void)
int response;
rc = sclp_register(&sclp_cpi_event);
- if (rc) {
- printk(KERN_WARNING "cpi: could not register "
- "to hardware console.\n");
+ if (rc)
goto out;
- }
if (!(sclp_cpi_event.sclp_receive_mask & EVTYP_CTLPROGIDENT_MASK)) {
- printk(KERN_WARNING "cpi: no control program "
- "identification support\n");
rc = -EOPNOTSUPP;
goto out_unregister;
}
req = cpi_prepare_req();
if (IS_ERR(req)) {
- printk(KERN_WARNING "cpi: could not allocate request\n");
rc = PTR_ERR(req);
goto out_unregister;
}
@@ -150,10 +144,8 @@ static int cpi_req(void)
/* Add request to sclp queue */
rc = sclp_add_request(req);
- if (rc) {
- printk(KERN_WARNING "cpi: could not start request\n");
+ if (rc)
goto out_free_req;
- }
wait_for_completion(&completion);
Index: quilt-2.6/drivers/s390/char/sclp_quiesce.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_quiesce.c
+++ quilt-2.6/drivers/s390/char/sclp_quiesce.c
@@ -51,13 +51,7 @@ static struct sclp_register sclp_quiesce
static int __init
sclp_quiesce_init(void)
{
- int rc;
-
- rc = sclp_register(&sclp_quiesce_event);
- if (rc)
- printk(KERN_WARNING "sclp: could not register quiesce handler "
- "(rc=%d)\n", rc);
- return rc;
+ return sclp_register(&sclp_quiesce_event);
}
module_init(sclp_quiesce_init);
Index: quilt-2.6/drivers/s390/char/sclp_rw.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_rw.c
+++ quilt-2.6/drivers/s390/char/sclp_rw.c
@@ -19,8 +19,6 @@
#include "sclp.h"
#include "sclp_rw.h"
-#define SCLP_RW_PRINT_HEADER "sclp low level driver: "
-
/*
* The room for the SCCB (only for writing) is not equal to a pages size
* (as it is specified as the maximum size in the SCLP documentation)
Index: quilt-2.6/drivers/s390/char/sclp_sdias.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_sdias.c
+++ quilt-2.6/drivers/s390/char/sclp_sdias.c
@@ -239,10 +239,8 @@ int __init sclp_sdias_init(void)
debug_register_view(sdias_dbf, &debug_sprintf_view);
debug_set_level(sdias_dbf, 6);
rc = sclp_register(&sclp_sdias_register);
- if (rc) {
- ERROR_MSG("sclp register failed\n");
+ if (rc)
return rc;
- }
init_waitqueue_head(&sdias_wq);
TRACE("init done\n");
return 0;
Index: quilt-2.6/drivers/s390/char/sclp_tty.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_tty.c
+++ quilt-2.6/drivers/s390/char/sclp_tty.c
@@ -25,8 +25,6 @@
#include "sclp_rw.h"
#include "sclp_tty.h"
-#define SCLP_TTY_PRINT_HEADER "sclp tty driver: "
-
/*
* size of a buffer that collects single characters coming in
* via sclp_tty_put_char()
@@ -736,9 +734,6 @@ sclp_tty_init(void)
rc = sclp_rw_init();
if (rc) {
- printk(KERN_ERR SCLP_TTY_PRINT_HEADER
- "could not register tty - "
- "sclp_rw_init returned %d\n", rc);
put_tty_driver(driver);
return rc;
}
@@ -792,9 +787,6 @@ sclp_tty_init(void)
tty_set_operations(driver, &sclp_ops);
rc = tty_register_driver(driver);
if (rc) {
- printk(KERN_ERR SCLP_TTY_PRINT_HEADER
- "could not register tty - "
- "tty_register_driver returned %d\n", rc);
put_tty_driver(driver);
return rc;
}
Index: quilt-2.6/drivers/s390/char/sclp_vt220.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_vt220.c
+++ quilt-2.6/drivers/s390/char/sclp_vt220.c
@@ -27,7 +27,6 @@
#include <asm/uaccess.h>
#include "sclp.h"
-#define SCLP_VT220_PRINT_HEADER "sclp vt220 tty driver: "
#define SCLP_VT220_MAJOR TTY_MAJOR
#define SCLP_VT220_MINOR 65
#define SCLP_VT220_DRIVER_NAME "sclp_vt220"
@@ -716,12 +715,8 @@ static int __init sclp_vt220_tty_init(vo
tty_set_operations(driver, &sclp_vt220_ops);
rc = tty_register_driver(driver);
- if (rc) {
- printk(KERN_ERR SCLP_VT220_PRINT_HEADER
- "could not register tty - "
- "tty_register_driver returned %d\n", rc);
+ if (rc)
goto out_init;
- }
sclp_vt220_driver = driver;
return 0;
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
--
To unsubscribe from this list: send the line "unsubscribe linux-s390" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
