Greetings, my last try to straighten then Kconfig for s390 failed, probably due to the disable statement. I still want to get rid of the s390 specific Kconfig file in drivers/s390/Kconfig. Too much duplication, too often something that should have been added is forgotten.. So this is a new attempt, this time without the disable extension but with lots of "depends on !S390" lines. The eight patches go on top of 2.6.21-rc6-mm1. Patches 1-4 fit (with hunks) on top of the current git as well. I noticed an oddity with the B44 option. It selects SSB which is a new bus that sits on top of either PCI or PCMCIA. The trouble is that s390 does have neither PCI nor PCMCIA. Patch #7 adds a depends line to the SSB option. Now the SSB option is not available on s390 anymore but the B44 option is. You can select it and by doing so the SSB option gets selected as well(!). I solved this by replacing the "select SSB" with a "depends on SSB", see patch #8. But then the B44 option is only available if the SSB option is enabled. What we'd need is an additional check if the options that are to be selected by a config option can be selected as well and hide the original config option that does the invalid select. Quite a nasty problem. If nobody objects to the cleanup I'll add the patches to git390 for a please-pull at the next merge window. -- blue skies, Martin. "Reality continues to ruin my life." - Calvin. - To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
