On Tue, Feb 11, 2025 at 01:25:38PM +0200, Ciprian Marian Costea wrote:
> On 2/7/2025 10:16 PM, Frank Li wrote:
> > On Fri, Feb 07, 2025 at 06:38:06PM +0200, Ciprian Costea wrote:
> > > From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> > >
> > > Add a RTC driver for NXP S32G2/S32G3 SoCs.
> > >
> > > RTC tracks clock time during system suspend. It can be a wakeup source
> > > for the S32G2/S32G3 SoC based boards.
> > >
> > > The RTC module from S32G2/S32G3 is not battery-powered and it is not kept
> > > alive during system reset.
> > >
> > > Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> > > Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> > > Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> > > Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> > > Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> > > ---
> > > drivers/rtc/Kconfig | 11 ++
> > > drivers/rtc/Makefile | 1 +
> > > drivers/rtc/rtc-s32g.c | 383 +++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 395 insertions(+)
> > > create mode 100644 drivers/rtc/rtc-s32g.c
> > >
> > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > > index 0bbbf778ecfa..510dc2db745d 100644
> > > --- a/drivers/rtc/Kconfig
> > > +++ b/drivers/rtc/Kconfig
> > > @@ -2103,4 +2103,15 @@ config RTC_DRV_AMLOGIC_A4
> > > This driver can also be built as a module. If so, the module
> > > will be called "rtc-amlogic-a4".
> > >
> > > +config RTC_DRV_S32G
> > > + tristate "RTC driver for S32G2/S32G3 SoCs"
> > > + depends on ARCH_S32 || COMPILE_TEST
> > > + depends on COMMON_CLK
> > > + help
> > > + Say yes to enable RTC driver for platforms based on the
> > > + S32G2/S32G3 SoC family.
> > > +
> > > + This RTC module can be used as a wakeup source.
> > > + Please note that it is not battery-powered.
> > > +
> > > endif # RTC_CLASS
> > > diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> > > index 489b4ab07068..e4b616ecd5ce 100644
> > > --- a/drivers/rtc/Makefile
> > > +++ b/drivers/rtc/Makefile
> > > @@ -161,6 +161,7 @@ obj-$(CONFIG_RTC_DRV_RX8111) += rtc-rx8111.o
> > > obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
> > > obj-$(CONFIG_RTC_DRV_RZN1) += rtc-rzn1.o
> > > obj-$(CONFIG_RTC_DRV_RENESAS_RTCA3) += rtc-renesas-rtca3.o
> > > +obj-$(CONFIG_RTC_DRV_S32G) += rtc-s32g.o
> > > obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
> > > obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
> > > obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
> > > diff --git a/drivers/rtc/rtc-s32g.c b/drivers/rtc/rtc-s32g.c
> > > new file mode 100644
> > > index 000000000000..3244b23c533e
> > > --- /dev/null
> > > +++ b/drivers/rtc/rtc-s32g.c
> >
> > ...
> >
> > > +
> > > +static int s32g_rtc_suspend(struct device *dev)
> > > +{
> > > + struct rtc_priv *priv = dev_get_drvdata(dev);
> > > + u32 apival = readl(priv->rtc_base + APIVAL_OFFSET);
> > > +
> > > + /* RTC registers are being reset in suspend.
> > > + * Thus store standby time.
> > > + */
> > > + if (check_add_overflow(priv->sleep_sec, div64_u64(apival, priv->rtc_hz),
> > > + &priv->sleep_sec)) {
> > > + dev_warn(dev, "Overflow on sleep cycles occurred. Resetting to 0.\n");
> > > + priv->sleep_sec = 0;
> > > + }
> >
> > Strange. If RTC register are reset in suspend. How do it wake up system?
> >
> > Frank
> >
>
> Hello Frank,
>
> I believe the transition between resume to run is a reset event. This would
> lead to the RTC registers being reset after resume from suspend (triggered
> via Suspend to RAM).
It is weird design. I suppose it should be design error. (any errata for
it).
Frank
>
> On the other hand, the RTC is kept on during suspend for as long as its been
> set up (for example via rtcwake -s), thus waking up the sistem via an API
> interrupt.
>
> Regards,
> Ciprian
>
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int s32g_rtc_resume(struct device *dev)
> > > +{
> > > + struct rtc_priv *priv = dev_get_drvdata(dev);
> > > +
> > > + return rtc_clk_src_setup(priv);
> > > +}
> > > +
> > > +static const struct of_device_id rtc_dt_ids[] = {
> > > + { .compatible = "nxp,s32g2-rtc", .data = &rtc_s32g2_data},
> > > + { /* sentinel */ },
> > > +};
> > > +
> > > +static DEFINE_SIMPLE_DEV_PM_OPS(s32g_rtc_pm_ops,
> > > + s32g_rtc_suspend, s32g_rtc_resume);
> > > +
> > > +static struct platform_driver s32g_rtc_driver = {
> > > + .driver = {
> > > + .name = "s32g-rtc",
> > > + .pm = pm_sleep_ptr(&s32g_rtc_pm_ops),
> > > + .of_match_table = rtc_dt_ids,
> > > + },
> > > + .probe = s32g_rtc_probe,
> > > +};
> > > +module_platform_driver(s32g_rtc_driver);
> > > +
> > > +MODULE_AUTHOR("NXP");
> > > +MODULE_DESCRIPTION("NXP RTC driver for S32G2/S32G3");
> > > +MODULE_LICENSE("GPL");
> > > --
> > > 2.45.2
> > >
>
