Hi,
On Thu, Nov 28, 2024 at 3:02 PM Ming Wang <wangming01@xxxxxxxxxxx> wrote:
>
> The TOY_MATCH0_REG should be cleared to 0 in the RTC interrupt handler,
> otherwise the interrupt cannot be cleared, which will cause the
> loongson_rtc_isr to be triggered multiple times.
Function names usually use () postfixes, e.g., loongson_rtc_isr() and
loongson_rtc_handler().
>
> The previous code cleared TOY_MATCH0_REG in the loongson_rtc_handler,
> which is an ACPI interrupt. This did not prevent loongson_rtc_isr
> from being triggered multiple times.
>
> This commit moves the clearing of TOY_MATCH0_REG to the loongson_rtc_isr
> to ensure that the interrupt is properly cleared.
>
> Fixes: 1b733a9ebc3d ("rtc: Add rtc driver for the Loongson family chips")
> Signed-off-by: Ming Wang <wangming01@xxxxxxxxxxx>
> ---
> drivers/rtc/rtc-loongson.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rtc/rtc-loongson.c b/drivers/rtc/rtc-loongson.c
> index e8ffc1ab90b0..0aa30095978b 100644
> --- a/drivers/rtc/rtc-loongson.c
> +++ b/drivers/rtc/rtc-loongson.c
> @@ -114,6 +114,12 @@ static irqreturn_t loongson_rtc_isr(int irq, void *id)
> struct loongson_rtc_priv *priv = (struct loongson_rtc_priv *)id;
>
> rtc_update_irq(priv->rtcdev, 1, RTC_AF | RTC_IRQF);
> +
> + /*
> + * The TOY_MATCH0_REG should be cleared 0 here,
> + * otherwise the interrupt cannot be cleared.
> + */
> + regmap_write(priv->regmap, TOY_MATCH0_REG, 0);
There is usually a blank line before the return statement.
Huacai
> return IRQ_HANDLED;
> }
>
> @@ -131,11 +137,7 @@ static u32 loongson_rtc_handler(void *id)
> writel(RTC_STS, priv->pm_base + PM1_STS_REG);
> spin_unlock(&priv->lock);
>
> - /*
> - * The TOY_MATCH0_REG should be cleared 0 here,
> - * otherwise the interrupt cannot be cleared.
> - */
> - return regmap_write(priv->regmap, TOY_MATCH0_REG, 0);
> + return ACPI_INTERRUPT_HANDLED;
> }
>
> static int loongson_rtc_set_enabled(struct device *dev)
> --
> 2.43.0
>
