From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> Hi, On the Renesas RZ/G3S SoC the RTC clock is provided by the VBATTB IP. A 32 KHz crystall oscillator could be connected to the VBATTB input pins. The logic to control this clock (and pass it to RTC) is inside the VBATTB IP. For this, the clk-vbattb driver was added (patches 01-04/12). Patches 05-06/12 add the RTC driver. Patches 07-10/12 update the device trees with proper nodes to enable RTC. Patches 11-12/12 enable proper config flags for RTC to work on RZ/G3S SoC. Merge strategy, if any: - clock patches (01-04/12) need to go though the same tree because of patch 04/12 using the devm_clk_hw_register_gate_parent_hw() introduced in patch 03/12 - RTC patches (03-04/12) can go though RTC tree - DTS and defconfig patches can go though Renesas tree Thank you, Claudiu Beznea Changes in v3: - dropped patches "mfd: renesas-vbattb: Add a MFD driver for the Renesas VBATTB IP" - added patches: -- dt-bindings: clock: r9a08g045-vbattb: Add clock IDs for the VBATTB controller -- clk: linux/clk-provider.h: Add devm_clk_hw_register_gate_parent_hw() - moved Documentation/devicetree/bindings/mfd/renesas,r9a08g045-vbattb.yaml to Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml - addressed review comments - per patch changes are listed in individual patches Changes in v2: - dropped patch "clk: renesas: r9a08g045: Add clock, reset and power domain support for the VBATTB IP" as it was already integrated - kept only a documentation file for both VBATT MFD and clock drivers as suggested - addressed review comments - used cleanup.h lock helpers - update startup sequence for the RTC driver - switch to 24 hours mode on the RTC driver - fixed range for the RTC driver - added a generic compatible for the RTC driver as this will also be used by RZ/V2H - used clkin/xin clock names for the VBATTB clock driver to determine if bypass should be configured on registers instead of having dedicated DT property - added mfd driver for VBATTB - updated Kconfig flag names to include vendor name - removed DT node labels from Documentation files - used items to describe the interrupts and clocks Claudiu Beznea (12): dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB dt-bindings: clock: r9a08g045-vbattb: Add clock IDs for the VBATTB controller clk: linux/clk-provider.h: Add devm_clk_hw_register_gate_parent_hw() clk: renesas: clk-vbattb: Add VBATTB clock driver dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC arm64: dts: renesas: r9a08g045: Add VBATTB node arm64: dts: renesas: r9a08g045: Add RTC node arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB arm64: dts: renesas: rzg3s-smarc-som: Enable RTC arm64: defconfig: Enable VBATTB clock arm64: defconfig: Enable Renesas RTCA-3 flag .../clock/renesas,r9a08g045-vbattb.yaml | 81 ++ .../bindings/rtc/renesas,rz-rtca3.yaml | 86 ++ MAINTAINERS | 8 + arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 36 + .../boot/dts/renesas/rzg3s-smarc-som.dtsi | 13 + arch/arm64/configs/defconfig | 2 + drivers/clk/renesas/Kconfig | 4 + drivers/clk/renesas/Makefile | 1 + drivers/clk/renesas/clk-vbattb.c | 204 ++++ drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-renesas-rtca3.c | 892 ++++++++++++++++++ include/dt-bindings/clock/r9a08g045-vbattb.h | 13 + include/linux/clk-provider.h | 18 + 14 files changed, 1369 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml create mode 100644 Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml create mode 100644 drivers/clk/renesas/clk-vbattb.c create mode 100644 drivers/rtc/rtc-renesas-rtca3.c create mode 100644 include/dt-bindings/clock/r9a08g045-vbattb.h -- 2.39.2