From: Peng Fan <peng.fan@xxxxxxx> Add NXP i.MX95 System Control Management Interface(SCMI) vendor extensions protocol documentation. Reviewed-by: Cristian Marussi <cristian.marussi@xxxxxxx> Signed-off-by: Peng Fan <peng.fan@xxxxxxx> --- drivers/firmware/arm_scmi/vendors/imx/imx95.rst | 886 ++++++++++++++++++++++++ 1 file changed, 886 insertions(+) diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx95.rst b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst new file mode 100644 index 000000000000..6a9e53c17df1 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst @@ -0,0 +1,886 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=============================================================================== +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024 NXP + +:Author: Peng Fan <peng.fan@xxxxxxx> + +The System Manager (SM) is a low-level system function which runs on a System +Control Processor (SCP) to support isolation and management of power domains, +clocks, resets, sensors, pins, etc. on complex application processors. It often +runs on a Cortex-M processor and provides an abstraction to many of the +underlying features of the hardware. The primary purpose of the SM is to allow +isolation between software running on different cores in the SoC. It does this +by having exclusive access to critical resources such as those controlling +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those +clients. This allows the SM to provide access control, arbitration, and +aggregation policies for those shared critical resources. + +SM introduces a concept Logic Machine(LM) which is analogous to VM and each has +its own instance of SCMI. All normal SCMI calls only apply to that LM. That +includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7) +are completely isolated from the others and each LM has its own communication +channels talking to the same SCMI server. + +This document covers all the information necessary to understand, maintain, +port, and deploy the SM on supported processors. + +The SM implements an interface compliant with the Arm SCMI Specification +with additional vendor specific extensions. + +SCMI_BBM: System Control and Management BBM Vendor Protocol +============================================================== + +This protocol is intended provide access to the battery-backed module. This +contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol +can also provide access to similar functions implemented via external board +components. The BBM protocol provides functions to: + +- Describe the protocol version. +- Discover implementation attributes. +- Read/write GPR +- Discover the RTCs available in the system. +- Read/write the RTC time in seconds and ticks +- Set an alarm (per LM) in seconds +- Get notifications on RTC update, alarm, or rollover. +- Get notification on ON/OFF button activity. + +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. +Board code can add additional GPR and RTC. + +GPR are not aggregated. The RTC time is also not aggregated. Setting these +sets for all so normally exclusive access would be granted to one agent for +each. However, RTC alarms are maintained for each LM and the hardware is +programmed with the next nearest alarm time. So only one agent in an LM should +be given access rights to set an RTC alarm. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes | Bits[31:8] Number of RTCs. | +| | Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_SET +~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to write | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value to write to the GPR | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully written. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to write | +| |the specified GPR | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_GET +~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to read | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully read. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to read | +| |the specified GPR. | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value read from the GPR | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ATTRIBUTES +~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: returned the attributes. | +| |NOT_FOUND: Index is invalid. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | +| |Bit[23:16] Bit width of RTC ticks. | +| |Bits[15:0] RTC ticks per second | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the RTC name | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x6 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x7 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully get. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ALARM_SET +~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC enable flag: | +| |Set to 1 if the RTC alarm should be enabled. | +| |Set to 0 if the RTC alarm should be disabled | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | +| |Upper word: Upper 32 bits of the time in seconds. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC | +| |alarm | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_GET +~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the button status was read. | +| |Other value: ARM SCMI Specification status code definitions| ++------------------+-----------------------------------------------------------+ +|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_NOTIFY +~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:3] Reserved, must be zero. | +| |Bit[2] Update enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[1] Rollover enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[0] Alarm enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |DENIED: the agent does not have permission to request RTC | +| |notifications. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_NOTIFY +~~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Enable button: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |DENIED: the agent does not have permission to request | +| |button notifications. | ++------------------+-----------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x81 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +BBM_RTC_EVENT +~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | +| |Bits[31:2] Reserved, must be zero. | +| |Bit[1] RTC rollover notification: | +| |1 RTC rollover detected. | +| |0 no RTC rollover detected. | +| |Bit[0] RTC alarm notification: | +| |1 RTC alarm generated. | +| |0 no RTC alarm generated. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_EVENT +~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | ++------------------+-----------------------------------------------------------+ +| |Button events: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Button notification: | +| |1 button change detected. | +| |0 no button change detected. | ++------------------+-----------------------------------------------------------+ + +SCMI_MISC: System Control and Management MISC Vendor Protocol +================================================================ + +Provides miscellaneous functions. This includes controls that are miscellaneous +settings/actions that must be exposed from the SM to agents. They are device +specific and are usually define to access bit fields in various mix block +control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol +supports the following functions: + +- Describe the protocol version. +- Discover implementation attributes. +- Set/Get a control. +- Initiate an action on a control. +- Obtain platform (i.e. SM) build information. +- Obtain ROM passover data. +- Read boot/shutdown/reset information for the LM or the system. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x84 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Protocol attributes: | +| |Bits[31:24] Reserved, must be zero. | +| |Bits[23:16] Number of reset reasons. | +| |Bits[15:0] Number of controls | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the value data in words | ++------------------+-----------------------------------------------------------+ +|uint32 val[8] |value data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to set the | +| |control | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was get successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_ACTION +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 action |Action for the control | ++------------------+-----------------------------------------------------------+ +|uint32 numarg |Size of the argument data, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|arg[0, numarg -1] |Argument data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the action was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_DISCOVER_BUILD_INFO +~~~~~~~~~~~~~~~~~~~~~~~~ + +This function is used to obtain the build commit, data, time, number. + +message_id: 0x6 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the build info was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 buildnum |Build number | ++------------------+-----------------------------------------------------------+ +|uint32 buildcommit|Most significant 32 bits of the git commit hash | ++------------------+-----------------------------------------------------------+ +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ + +MISC_ROM_PASSOVER_GET +~~~~~~~~~~~~~~~~~~~~~ + +ROM passover data is information exported by ROM and could be used by others. +It includes boot device, instance, type, mode and etc. This function is used +to obtain the ROM passover data. The returned block of words is structured as +defined in the ROM passover section in the SoC RM. + +message_id: 0x7 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the data was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the passover data in words, max 13 | ++------------------+-----------------------------------------------------------+ +|uint32_t | | +|data[0, num - 1] |Passover data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_NOTIFY +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of control | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags, varies by control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: control id not exists. | +| |INVALID_PARAMETERS: if the input attributes flag specifies | +| |unsupported or invalid configurations.. | +| |DENIED: if the calling agent is not permitted to request | +| |the notification. | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 reasonid |Identifier for the reason | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if valid reason attributes are returned | +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Reason attributes. This parameter has the following | +| |format: Bits[31:0] Reserved, must be zero | +| |Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the reason | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_GET +~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Reason flags. This parameter has the following format: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] System: | +| |Set to 1 to return the system reason. | +| |Set to 0 to return the LM reason | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: reset reason return | ++--------------------+---------------------------------------------------------+ +|uint32 bootflags |Boot reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Reserved, must be zero. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Number of valid extended info words. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 extinfo[8] |Array of extended info words | ++--------------------+---------------------------------------------------------+ + +MISC_SI_INFO_GET +~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: silicon info return | ++--------------------+---------------------------------------------------------+ +|uint32 deviceid |Silicon specific device ID | ++--------------------+---------------------------------------------------------+ +|uint32 sirev |Silicon specific revision | ++--------------------+---------------------------------------------------------+ +|uint32 partnum |Silicon specific part number | ++--------------------+---------------------------------------------------------+ +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up| +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_CFG_INFO_GET +~~~~~~~~~~~~~~~~~ + +message_id: 0xC +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: config name return | +| |NOT_SUPPORTED: name not available | ++--------------------+---------------------------------------------------------+ +|uint32 msel |Mode selector value | ++--------------------+---------------------------------------------------------+ +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up | +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_SYSLOG_GET +~~~~~~~~~~~~~~~ + +message_id: 0xD +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Device specific flags that might impact the data returned| +| |or clearing of the data | ++--------------------+---------------------------------------------------------+ +|uint32 logindex |Index to the first log word. Will be the first element in| +| |the return array | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: system log return | ++--------------------+---------------------------------------------------------+ +|uint32 numLogflags |Descriptor for the log data returned by this call. | +| |Bits[31:20] Number of remaining log words. | +| |Bits[15:12] Reserved, must be zero. | +| |Bits[11:0] Number of log words that are returned by this | +| |call | ++--------------------+---------------------------------------------------------+ +|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags| ++--------------------+---------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +MISC_CONTROL_EVENT +~~~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ctrlid |Identifier for the control that caused the event. | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Event flags, varies by control. | ++------------------+-----------------------------------------------------------+ -- 2.37.1
