Re: [PATCH 03/12] dt-bindings: mfd: renesas,rzg3s-vbattb: Document VBATTB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 17.06.2024 10:16, claudiu beznea wrote:
> 
> 
> On 16.06.2024 10:38, Krzysztof Kozlowski wrote:
>> On 14/06/2024 09:19, Claudiu wrote:
>>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>>> +
>>> +maintainers:
>>> +  - Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>> +
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - const: renesas,rzg3s-vbattb
>>> +      - const: syscon
>>> +      - const: simple-mfd
>>
>> No, mfd does no look good. That's not a simple device anymore and you
>> claim here child does not need vbat bclk, power domains and resets? That
>> would be a big surprise, although technically possible.
> 
> I wasn't sure how this MFD will be received by the Renesas maintainers so I
> kept it simple for this version.
> 
> In theory the VBAT clk, power domain and resets are specific to VBAT module
> itself but, indeed, the child cannot work w/o these.
> 
>>
>> Please clarify: which of parent resources are needed for children?
> 
> VBAT clock, power domain are needed. Reset, too. In the current
> implementation the reset is deasserted though parent by calling the
> syscon_node_to_regmap(np->parent) in the clock driver.
> 
>>
>> ...
>>
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/clock/r9a08g045-cpg.h>
>>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +    vbattb: vbattb@1005c000 {
>>> +        compatible = "renesas,rzg3s-vbattb", "syscon", "simple-mfd";
>>> +        reg = <0x1005c000 0x1000>;
>>> +        ranges = <0 0 0x1005c000 0 0x1000>;
>>> +        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>>> +        interrupt-names = "tampdi";
>>> +        clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>;
>>> +        clock-names = "bclk";
>>> +        power-domains = <&cpg>;
>>> +        resets = <&cpg R9A08G045_VBAT_BRESETN>;
>>> +        #address-cells = <2>;
>>> +        #size-cells = <2>;
>>> +        status = "disabled";
>>
>> Drop
> 
> Could you please clarify this? Would you want me to drop the full node
> (same for clock-controller node)?

Looking at your review on patch 05/12 from this series I noticed you're
taking about the status = "disabled" lines.

I'll drop it as suggested.

Thank you,
Claudiu Beznea

> 
> Can you point me an example that you are thinking about?
> 
> Thank you,
> Claudiu Beznea
> 
>>
>>> +
>>> +        vbattclk: clock-controller@1c {
>>> +            compatible = "renesas,rzg3s-vbattb-clk";
>>> +            reg = <0 0x1c 0 0x10>;
>>> +            clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
>>> +            clock-names = "bclk", "vbattb_xtal";
>>> +            #clock-cells = <0>;
>>> +            power-domains = <&cpg>;
>>> +            status = "disabled";
>>
>> Drop
>>
>>> +        };
>>> +    };
>>> +
>>> +...
>>
>> Best regards,
>> Krzysztof
>>




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux