The RTC documented in this binding requires a compatible, a reg
and a single interrupt, which makes it suitable for a direct
conversion into trivial-rtc.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
---
Documentation/devicetree/bindings/rtc/spear-rtc.txt | 15 ---------------
Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 2 ++
2 files changed, 2 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
deleted file mode 100644
index fecf8e4ad4b4..000000000000
--- a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* SPEAr RTC
-
-Required properties:
-- compatible : "st,spear600-rtc"
-- reg : Address range of the rtc registers
-- interrupt: Should contain the rtc interrupt number
-
-Example:
-
- rtc@fc000000 {
- compatible = "st,spear600-rtc";
- reg = <0xfc000000 0x1000>;
- interrupt-parent = <&vic1>;
- interrupts = <12>;
- };
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 0f773167d32a..d75c93ad2e92 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -81,6 +81,8 @@ properties:
- ricoh,rv5c387a
# 2-wire CMOS real-time clock
- sii,s35390a
+ # ST SPEAr Real-time Clock
+ - st,spear600-rtc
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
- whwave,sd3078
# Xircom X1205 I2C RTC
--
2.40.1
