Convert the abracon abx80x rtc text bindings to dt-schema format. Additionally added "interrupts" property which was missing from text format, because abx80x and driver support them. Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> --- .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 ------------ .../devicetree/bindings/rtc/abracon,abx80x.yaml | 56 ++++++++++++++++++++++ 2 files changed, 56 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt deleted file mode 100644 index 2405e35a1bc0..000000000000 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Abracon ABX80X I2C ultra low power RTC/Alarm chip - -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 -is the superset of ab180x. - -Required properties: - - - "compatible": should one of: - "abracon,abx80x" - "abracon,ab0801" - "abracon,ab0803" - "abracon,ab0804" - "abracon,ab0805" - "abracon,ab1801" - "abracon,ab1803" - "abracon,ab1804" - "abracon,ab1805" - "microcrystal,rv1805" - Using "abracon,abx80x" will enable chip autodetection. - - "reg": I2C bus address of the device - -Optional properties: - -The abx804 and abx805 have a trickle charger that is able to charge the -connected battery or supercap. Both the following properties have to be defined -and valid to enable charging: - - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml new file mode 100644 index 000000000000..c80d4a46a044 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip + +maintainers: [] + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + anyOf: + - description: auto-detection from id register + const: abracon,abx80x + - const: abracon,,ab0801 + - const: abracon,,ab0803 + - const: abracon,,ab0804 + - const: abracon,,ab0805 + - const: abracon,,ab1801 + - const: abracon,,ab1803 + - const: abracon,,ab1804 + - const: abracon,,ab1805 + - const: microcrystal,rv1805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + abracon,tc-diode: + description: + Trickle-charge diode type. + Required to enable charging backup battery. + anyOf: + - description: standard diode with 0.6V drop + const: standard + - description: schottky diode with 0.3V drop + const: schottky + + abracon,tc-resistor: + description: + Trickle-charge resistor value in kOhm. + Required to enable charging backup battery. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 3, 6, 11] + +required: + - compatible + - reg + +unevaluatedProperties: false -- 2.35.3
