On 26/12/2023 11:04, Jingbao Qiu wrote: > Add devicetree binding for Sophgo CV1800 SoC MFD subsys. Subject and commit msg: there is no such hardware as "MFD subsys". Is this a PMIC? Does not look like. You must describe here hardware, not Linux subsystem. > > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx> > --- Please mention the dependency here. > .../bindings/mfd/sophgo,cv1800-subsys.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/sophgo,cv1800-subsys.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/sophgo,cv1800-subsys.yaml b/Documentation/devicetree/bindings/mfd/sophgo,cv1800-subsys.yaml > new file mode 100644 > index 000000000000..c2a071c8a2de > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/sophgo,cv1800-subsys.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/sophgo,cv1800-subsys.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sophgo CV1800 SoC subsys controller > + > +maintainers: > + - Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx> > + > +description: > + The Sophgo CV1800 SoC subsys controller contains many functions What is "subsys"? Why is it in MFD directory? SoC components like system-controllers do not go to MFD. > + for example, RTC and restart. In addition, CV1800 has an 8051 > + subsystem, which is configured through registers at this controller. > + > +properties: > + compatible: > + items: > + - const: sophgo,cv1800b-subsys > + - const: syscon > + - const: simple-mfd > + > + reg: > + maxItems: 1 > + > + rtc: > + $ref: /schemas/rtc/sophgo,cv1800-rtc.yaml# Your patchset is not bisectable. What's more, you have dependency between patches, so bindings cannot go via separate trees: mfd and rtc. You need to make this *EXPLICIT* in the cover letter or patch changelog. I do not see any resources in MFD block, so why having it as separate node? What other devices you did not describe here? You mentioned restart and 8051, so where are they? Which driver implements them? Best regards, Krzysztof
