On 27/10/2023 18:20, Carlos Menin wrote: > Add YAML bindings for NXP's PCF85053A RTC chip. > > Signed-off-by: Carlos Menin <menin@xxxxxxxxxxxxxxxxx> > Reviewed-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx> Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested. Please kindly resend and include all necessary To/Cc entries. > --- > .../bindings/rtc/nxp,pcf85053a.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85053a.yaml > > diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85053a.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85053a.yaml > new file mode 100644 > index 000000000000..80980377e27f > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85053a.yaml > @@ -0,0 +1,57 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/nxp,pcf85053a.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP PCF85053A Real Time Clock > + > +maintainers: > + - Carlos Menin <menin@xxxxxxxxxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - nxp,pcf85053a > + > + reg: > + maxItems: 1 > + > + quartz-load-femtofarads: > + description: > + The quartz oscillator load capacitance. > + enum: [6000, 7000, 12500] > + default: 6000 > + > + quartz-drive-control: > + description: > + The quartz oscillator drive control. > + enum: [low, normal, high] > + default: normal > + > + low-jitter: > + description: > + Low jitter mode. > + type: boolean > + default: false Cannot be anything else. > + > +allOf: > + - $ref: rtc.yaml# This goes after required: > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtc@6f { > + compatible = "nxp,pcf85053a"; Use 4 spaces for example indentation. > + reg = <0x6f>; > + }; > + }; Best regards, Krzysztof
