On Thu, Aug 17, 2023 at 3:55 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> Some userspace applications use timerfd_create() to request wakeups after
> a long period of time. For example, a backup application may request a
> wakeup once per week. This is perfectly fine as long as the system does
> not try to suspend. However, if the system tries to suspend and the
> system's RTC does not support the required alarm timeout, the suspend
> operation will fail with an error such as
>
> rtc_cmos 00:01: Alarms can be up to one day in the future
> PM: dpm_run_callback(): platform_pm_suspend+0x0/0x4a returns -22
> alarmtimer alarmtimer.4.auto: platform_pm_suspend+0x0/0x4a returned -22 after 117 usecs
> PM: Device alarmtimer.4.auto failed to suspend: error -22
>
> This results in a refusal to suspend the system, causing substantial
> battery drain on affected systems.
>
> To fix the problem, use the maximum alarm time offset as reported by rtc
> drivers to set the maximum alarm time. While this will result in brief
> spurious wakeups from suspend, it is still much better than not suspending
> at all.
>
> Cc: Brian Norris <briannorris@xxxxxxxxxxxx>
> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> v2: Rename range_max_offset -> alarm_offset_max
>
> kernel/time/alarmtimer.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
> index 8d9f13d847f0..895e3a6d6444 100644
> --- a/kernel/time/alarmtimer.c
> +++ b/kernel/time/alarmtimer.c
> @@ -290,6 +290,19 @@ static int alarmtimer_suspend(struct device *dev)
> rtc_timer_cancel(rtc, &rtctimer);
> rtc_read_time(rtc, &tm);
> now = rtc_tm_to_ktime(tm);
> +
> + /*
> + * If the RTC alarm timer only supports a limited time offset, set
> + * the alarm time to the maximum supported value.
> + * The system will wake up earlier than necessary and is expected
> + * to go back to sleep if it has nothing to do.
> + * It would be desirable to handle such early wakeups without fully
> + * waking up the system, but it is unknown if this is even possible.
> + */
> + if (rtc->alarm_offset_max &&
> + rtc->alarm_offset_max * MSEC_PER_SEC < ktime_to_ms(min))
> + min = ms_to_ktime(rtc->alarm_offset_max * MSEC_PER_SEC);
I don't really have an objection here, but I wonder if this would be
better abstracted by a rtc_ function?
ktime_t rtc_bound_ktime_interval(ktime interval)
{
if (!rtc->alarm_offset_max)
return interval;
return ms_to_ktime(min(rtc->alarm_offset_max, ktime_to_ms(interval)));
}
(simple enough to throw into rtc.h maybe as an inline function?)
Then the above would be tweaked to:
min = rtc_bound_interval(min);
thanks
-john
