When wakeup-source is set in the devicetree, set up the device for
using the output as interrupt instead of clock. This is similar to
how other RTC devices handle this.
This allows the clock chip to turn on the board when wired to do
so in hardware.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
Changes in v2:
Don't call device_init_wakeup when IRW request fails
drivers/rtc/rtc-pcf85363.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
index 8958eadf1c3e..f9370e00d4dc 100644
--- a/drivers/rtc/rtc-pcf85363.c
+++ b/drivers/rtc/rtc-pcf85363.c
@@ -403,6 +403,7 @@ static int pcf85363_probe(struct i2c_client *client)
},
};
int ret, i, err;
+ bool wakeup_source;
if (data)
config = data;
@@ -432,25 +433,36 @@ static int pcf85363_probe(struct i2c_client *client)
pcf85363->rtc->ops = &rtc_ops;
pcf85363->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099;
- clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+
+ wakeup_source = device_property_read_bool(&client->dev,
+ "wakeup-source");
+ if (client->irq > 0 || wakeup_source) {
+ regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
+ regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
+ PIN_IO_INTA_OUT, PIN_IO_INTAPM);
+ }
if (client->irq > 0) {
unsigned long irqflags = IRQF_TRIGGER_LOW;
if (dev_fwnode(&client->dev))
irqflags = 0;
-
- regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
- regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
- PIN_IO_INTA_OUT, PIN_IO_INTAPM);
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pcf85363_rtc_handle_irq,
irqflags | IRQF_ONESHOT,
"pcf85363", client);
- if (ret)
- dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
- else
- set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+ if (ret) {
+ dev_warn(&client->dev,
+ "unable to request IRQ, alarms disabled\n");
+ client->irq = 0;
+ }
+ }
+
+ if (client->irq > 0 || wakeup_source) {
+ device_init_wakeup(&client->dev, true);
+ set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+ } else {
+ clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
}
ret = devm_rtc_register_device(pcf85363->rtc);
--
2.17.1
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@xxxxxxxx
W: www.topic.nl
Please consider the environment before printing this e-mail
