Hello,
On 09/08/2023 01:15:42+0000, Jacky Huang wrote:
> +
> +struct ma35_bcd_time {
> + int bcd_sec;
> + int bcd_min;
> + int bcd_hour;
> + int bcd_mday;
> + int bcd_mon;
> + int bcd_year;
> +};
I don't get why this struct is useful.
> +
> +static irqreturn_t ma35d1_rtc_interrupt(int irq, void *data)
> +{
> + struct ma35_rtc *rtc = (struct ma35_rtc *)data;
> + unsigned long events = 0, rtc_irq;
> +
> + rtc_irq = rtc_reg_read(rtc, MA35_REG_RTC_INTSTS);
> +
> + if (rtc_irq & RTC_INTSTS_ALMIF) {
> + rtc_reg_write(rtc, MA35_REG_RTC_INTSTS, RTC_INTSTS_ALMIF);
> + events |= RTC_AF | RTC_IRQF;
> + }
> +
> + if (rtc_irq & RTC_INTSTS_TICKIF) {
> + rtc_reg_write(rtc, MA35_REG_RTC_INTSTS, RTC_INTSTS_TICKIF);
> + events |= RTC_UF | RTC_IRQF;
How did you test this path?
> + }
> +
> + rtc_update_irq(rtc->rtcdev, 1, events);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ma35d1_rtc_init(struct ma35_rtc *rtc, u32 ms_timeout)
> +{
> + const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
> +
> + do {
> + if (rtc_reg_read(rtc, MA35_REG_RTC_INIT) & RTC_INIT_ACTIVE)
> + return 0;
> +
> + rtc_reg_write(rtc, MA35_REG_RTC_INIT, RTC_INIT_MAGIC_CODE);
> +
> + mdelay(1);
> +
> + } while (time_before(jiffies, timeout));
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int ma35d1_rtc_bcd2bin(u32 time, u32 cal, u32 wday, struct rtc_time *tm)
> +{
> + tm->tm_mday = bcd2bin(cal >> 0);
> + tm->tm_mon = bcd2bin(cal >> 8);
> + tm->tm_mon = tm->tm_mon - 1;
> + tm->tm_year = bcd2bin(cal >> 16) + 100;
> +
> + tm->tm_sec = bcd2bin(time >> 0);
> + tm->tm_min = bcd2bin(time >> 8);
> + tm->tm_hour = bcd2bin(time >> 16);
> +
> + tm->tm_wday = wday;
> +
> + return rtc_valid_tm(tm);
> +}
> +
> +static int ma35d1_rtc_alarm_bcd2bin(u32 talm, u32 calm, struct rtc_time *tm)
> +{
> + tm->tm_mday = bcd2bin(calm >> 0);
> + tm->tm_mon = bcd2bin(calm >> 8);
> + tm->tm_mon = tm->tm_mon - 1;
> + tm->tm_year = bcd2bin(calm >> 16) + 100;
> +
> + tm->tm_sec = bcd2bin(talm >> 0);
> + tm->tm_min = bcd2bin(talm >> 8);
> + tm->tm_hour = bcd2bin(talm >> 16);
> +
> + return rtc_valid_tm(tm);
> +}
> +
> +static void ma35d1_rtc_bin2bcd(struct device *dev, struct rtc_time *settm,
> + struct ma35_bcd_time *gettm)
> +{
> + gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
> + gettm->bcd_mon = bin2bcd((settm->tm_mon + 1)) << 8;
> +
> + if (settm->tm_year < 100) {
> + dev_warn(dev, "The year will be between 1970-1999, right?\n");
No, don't do that, properly set the rtc hardware range and let the user
choose their time offset/window.
> + gettm->bcd_year = bin2bcd(settm->tm_year) << 16;
> + } else {
> + gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
> + }
> +
> + gettm->bcd_sec = bin2bcd(settm->tm_sec) << 0;
> + gettm->bcd_min = bin2bcd(settm->tm_min) << 8;
> + gettm->bcd_hour = bin2bcd(settm->tm_hour) << 16;
> +}
Those functions are only used once, simply put them in their call site.
> +
> +static int ma35d1_alarm_irq_enable(struct device *dev, u32 enabled)
> +{
> + struct ma35_rtc *rtc = dev_get_drvdata(dev);
> + u32 reg_ien;
> +
> + reg_ien = rtc_reg_read(rtc, MA35_REG_RTC_INTEN);
> +
> + if (enabled)
> + rtc_reg_write(rtc, MA35_REG_RTC_INTEN, reg_ien | RTC_INTEN_ALMIEN);
> + else
> + rtc_reg_write(rtc, MA35_REG_RTC_INTEN, reg_ien & ~RTC_INTEN_ALMIEN);
> +
> + return 0;
> +}
> +
> +static int ma35d1_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct ma35_rtc *rtc = dev_get_drvdata(dev);
> + u32 time, cal, wday;
> +
> + time = rtc_reg_read(rtc, MA35_REG_RTC_TIME);
> + cal = rtc_reg_read(rtc, MA35_REG_RTC_CAL);
> + wday = rtc_reg_read(rtc, MA35_REG_RTC_WEEKDAY);
Are the registers properly latched when reading? How do you ensure that
MA35_REG_RTC_TIME didn't change before reading MA35_REG_RTC_CAL ?
> +
> + return ma35d1_rtc_bcd2bin(time, cal, wday, tm);
> +}
> +
> +static int ma35d1_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct ma35_rtc *rtc = dev_get_drvdata(dev);
> + struct ma35_bcd_time gettm;
> + u32 val;
> +
> + ma35d1_rtc_bin2bcd(dev, tm, &gettm);
> +
> + val = gettm.bcd_mday | gettm.bcd_mon | gettm.bcd_year;
> + rtc_reg_write(rtc, MA35_REG_RTC_CAL, val);
> +
> + val = gettm.bcd_sec | gettm.bcd_min | gettm.bcd_hour;
> + rtc_reg_write(rtc, MA35_REG_RTC_TIME, val);
> +
Same question about latching, shouldn't you stop the rtc while doing
this?
> + val = tm->tm_wday;
> + rtc_reg_write(rtc, MA35_REG_RTC_WEEKDAY, val);
> +
> + return 0;
> +}
> +
> +static int ma35d1_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct ma35_rtc *rtc = dev_get_drvdata(dev);
> + struct ma35_bcd_time tm;
> + unsigned long val;
> +
> + ma35d1_rtc_bin2bcd(dev, &alrm->time, &tm);
> +
> + val = tm.bcd_mday | tm.bcd_mon | tm.bcd_year;
> + rtc_reg_write(rtc, MA35_REG_RTC_CALM, val);
> +
> + val = tm.bcd_sec | tm.bcd_min | tm.bcd_hour;
> + rtc_reg_write(rtc, MA35_REG_RTC_TALM, val);
> +
What about handling alrm.enabled here?
> + return 0;
> +}
> +
> +static const struct rtc_class_ops ma35d1_rtc_ops = {
> + .read_time = ma35d1_rtc_read_time,
> + .set_time = ma35d1_rtc_set_time,
> + .read_alarm = ma35d1_rtc_read_alarm,
> + .set_alarm = ma35d1_rtc_set_alarm,
> + .alarm_irq_enable = ma35d1_alarm_irq_enable,
> +};
> +
> +static int ma35d1_rtc_probe(struct platform_device *pdev)
> +{
> + struct ma35_rtc *rtc;
> + struct clk *clk;
> + u32 regval;
> + int err;
> +
> + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> + if (!rtc)
> + return -ENOMEM;
> +
> + rtc->rtc_reg = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(rtc->rtc_reg))
> + return PTR_ERR(rtc->rtc_reg);
> +
> + clk = of_clk_get(pdev->dev.of_node, 0);
> + if (IS_ERR(clk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(clk), "failed to find rtc clock\n");
> +
> + err = clk_prepare_enable(clk);
> + if (err)
> + return -ENOENT;
> +
> + platform_set_drvdata(pdev, rtc);
> +
> + rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
> + &ma35d1_rtc_ops, THIS_MODULE);
> + if (IS_ERR(rtc->rtcdev))
> + return dev_err_probe(&pdev->dev, PTR_ERR(rtc->rtcdev),
> + "failed to register rtc device\n");
This MUST be done last in probe, else you open a race with userspace.
> +
> + err = ma35d1_rtc_init(rtc, RTC_INIT_TIMEOUT);
> + if (err)
> + return err;
> +
I don't believe you should do this on every probe but only when this
hasn't been done yet.
> + regval = rtc_reg_read(rtc, MA35_REG_RTC_CLKFMT);
> + regval |= RTC_CLKFMT_24HEN;
> + rtc_reg_write(rtc, MA35_REG_RTC_CLKFMT, regval);
> +
ditto
> + rtc->irq_num = platform_get_irq(pdev, 0);
> +
> + err = devm_request_irq(&pdev->dev, rtc->irq_num, ma35d1_rtc_interrupt,
> + IRQF_NO_SUSPEND, "ma35d1rtc", rtc);
> + if (err)
> + return dev_err_probe(&pdev->dev, err, "Failed to request rtc irq\n");
> +
> + regval = rtc_reg_read(rtc, MA35_REG_RTC_INTEN);
> + regval |= RTC_INTEN_TICKIEN;
> + rtc_reg_write(rtc, MA35_REG_RTC_INTEN, regval);
> +
> + device_init_wakeup(&pdev->dev, true);
> +
You must set the rtc range here.
> + return 0;
> +}
> +
> +static int ma35d1_rtc_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct ma35_rtc *rtc = platform_get_drvdata(pdev);
> + u32 regval;
> +
> + if (device_may_wakeup(&pdev->dev))
> + enable_irq_wake(rtc->irq_num);
> +
> + regval = rtc_reg_read(rtc, MA35_REG_RTC_INTEN);
> + regval &= ~RTC_INTEN_TICKIEN;
> + rtc_reg_write(rtc, MA35_REG_RTC_INTEN, regval);
This is not what the user is asking, don't do this. Also, how was this
tested?
> +
> + return 0;
> +}
> +
> +static int ma35d1_rtc_resume(struct platform_device *pdev)
> +{
> + struct ma35_rtc *rtc = platform_get_drvdata(pdev);
> + u32 regval;
> +
> + if (device_may_wakeup(&pdev->dev))
> + disable_irq_wake(rtc->irq_num);
> +
> + regval = rtc_reg_read(rtc, MA35_REG_RTC_INTEN);
> + regval |= RTC_INTEN_TICKIEN;
> + rtc_reg_write(rtc, MA35_REG_RTC_INTEN, regval);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ma35d1_rtc_of_match[] = {
> + { .compatible = "nuvoton,ma35d1-rtc", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ma35d1_rtc_of_match);
> +
> +static struct platform_driver ma35d1_rtc_driver = {
> + .suspend = ma35d1_rtc_suspend,
> + .resume = ma35d1_rtc_resume,
> + .probe = ma35d1_rtc_probe,
> + .driver = {
> + .name = "rtc-ma35d1",
> + .of_match_table = ma35d1_rtc_of_match,
> + },
> +};
> +
> +module_platform_driver(ma35d1_rtc_driver);
> +
> +MODULE_AUTHOR("Min-Jen Chen <mjchen@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("MA35D1 RTC driver");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
