From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> If PCF2127 device is absent from the I2C bus, or if there is a communication problem, disabling POR0 may fail silently and we still continue with probing the device. In that case, abort probe operation. Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> --- V1 -> V2: Removed error message --- drivers/rtc/rtc-pcf2127.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 78141bb06ab0..3387afe93417 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -1192,8 +1192,10 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, * The "Power-On Reset Override" facility prevents the RTC to do a reset * after power on. For normal operation the PORO must be disabled. */ - regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1, + ret = regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1, PCF2127_BIT_CTRL1_POR_OVRD); + if (ret < 0) + return ret; ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_clkout, &val); if (ret < 0) base-commit: 3c87b351809f220294aec3c0df7b078ff5c5b15b -- 2.30.2
