On 13/04/2023 15:57:32+0800, Binbin Zhou wrote: > Hi all: > > The initial DT-base ls2x rtc driver was written by Wang Xuerui, He has > released five versions of patchset before, and all related mail records > are shown below if you are interested: > > https://lore.kernel.org/all/?q=ls2x-rtc > > In this series of patches, based on the code above, I have added the > following support: > > 1. Add ACPI-related support, as Loongson-3A5000 + LS7A is now ACPI-base > by default under LoongArch architecture; > 2. Add rtc alarm/walarm related functions. > > I have tested on Loongson-3A5000LA+LS7A1000/LS7A2000, Loongson-2K1000LA > and Loongson-2K0500. > > BTW: > As LS1X does not support DT, we will merge LS2X and LS1X after keguang > has completed DT support for LS1X. Stop waiting and simply add it. > > ------- > Changes since v2: > - Rebase on the top of rtc-next. > patch(1/7): > - The new patch. > patch(2/7): > - Check patchset with "checkpatch.pl --strict"; > - Drop static inline functions which are used only once, such as > ls2x_rtc_regs_to_time; > - Remove the suruct ls2x_rtc_regs and regmap_bulk_xxx() is used to read > and write rtc registers; > - Clear the RTC wakeup interrupt manually; > - Enable the RTC in set_time() and check in read_time(); > - device_get_match_data() is used to get ls2x_pm_offset, for LS2k1000 > has the different value; > - Remove some inexact CONFIG_ACPI; > - remove()->remove_new(). > > Changes since v1: > 1. Rebased on top of latest loongarch-next; > 2. Add interrupt descriptions to the ls2k and ls7a DTS files to avoid > errors when the driver gets the IRQ number, Thanks to Qing Zhang for > testing; > 3. Remove some inexact CONFIG_ACPI. > > Thanks. > > Binbin Zhou (7): > dt-bindings: rtc: Subdivision of LS2X RTC compatible > rtc: Add support for the Loongson-2K/LS7A RTC > LoongArch: Enable LS2X RTC in loongson3_defconfig > MIPS: Loongson64: DTS: Add RTC support to LS7A > MIPS: Loongson: Enable LS2X RTC in loongson3_defconfig > MIPS: Loongson64: DTS: Add RTC support to Loongson-2K > MIPS: Loongson: Enable LS2X RTC in loongson2k_defconfig > > .../devicetree/bindings/rtc/trivial-rtc.yaml | 7 +- > arch/loongarch/configs/loongson3_defconfig | 1 + > .../boot/dts/loongson/loongson64-2k1000.dtsi | 7 + > arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 + > arch/mips/configs/loongson2k_defconfig | 1 + > arch/mips/configs/loongson3_defconfig | 1 + > drivers/rtc/Kconfig | 11 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-ls2x.c | 345 ++++++++++++++++++ > 9 files changed, 379 insertions(+), 2 deletions(-) > create mode 100644 drivers/rtc/rtc-ls2x.c > > -- > 2.39.1 > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
