On 13/03/2023 11:28:30-0400, Sean Anderson wrote:
> On 12/22/22 16:45, Sean Anderson wrote:
> > This adds support for the 256-byte internal RAM. There are two windows
> > which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
> > address space) and 128 bytes at 0x80 (the "alternate" address space). We
> > use the standard address space because it is also accessible over SPI
> > (if such a port is ever done). We are limited to 32-byte reads for SMBus
> > compatibility, so there's no advantage to using the alternate address
> > space.
> >
> > There are some reserved bits in the EXTRAM register, and the datasheet
> > doesn't say what to do with them. I've opted to skip a read/modify/write
> > and just write the whole thing. If this driver is ever converted to
> > regmap, this would be a good place to use regmap_update_bits.
> >
> > Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
> > ---
> >
> > Changes in v4:
> > - Remove unused variable
> >
> > Changes in v3:
> > - Use devm_rtc_nvmem_register
> > - Remove ifdefs
> >
> > Changes in v2:
> > - Fix building on non-arm platforms
> >
> > drivers/rtc/rtc-abx80x.c | 77 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 77 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
> > index 9b0138d07232..74ff820f5481 100644
> > --- a/drivers/rtc/rtc-abx80x.c
> > +++ b/drivers/rtc/rtc-abx80x.c
> > @@ -11,6 +11,7 @@
> > */
> >
> > #include <linux/bcd.h>
> > +#include <linux/bitfield.h>
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/of_device.h>
> > @@ -87,6 +88,16 @@
> > #define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
> > #define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
> >
> > +#define ABX8XX_REG_EXTRAM 0x3f
> > +#define ABX8XX_EXTRAM_XADS GENMASK(1, 0)
> > +
> > +#define ABX8XX_SRAM_BASE 0x40
> > +#define ABX8XX_SRAM_WIN_SIZE 0x40
> > +#define ABX8XX_RAM_SIZE 256
> > +
> > +#define NVMEM_ADDR_LOWER GENMASK(5, 0)
> > +#define NVMEM_ADDR_UPPER GENMASK(7, 6)
> > +
> > static u8 trickle_resistors[] = {0, 3, 6, 11};
> >
> > enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
> > @@ -673,6 +684,68 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
> > }
> > #endif
> >
> > +static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
> > + void *val, size_t bytes, bool write)
> > +{
> > + int ret;
> > +
> > + while (bytes) {
> > + u8 extram, reg, len, lower, upper;
> > +
> > + lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
> > + upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
> > + extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
> > + reg = ABX8XX_SRAM_BASE + lower;
> > + len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
> > + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
> > +
> > + ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
> > + extram);
> > + if (ret)
> > + return ret;
> > +
> > + if (write)
> > + ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
> > + len, val);
> > + else
> > + ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
> > + len, val);
> > + if (ret)
> > + return ret;
> > +
> > + offset += len;
> > + val += len;
> > + bytes -= len;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int abx80x_nvmem_read(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, false);
> > +}
> > +
> > +static int abx80x_nvmem_write(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + return abx80x_nvmem_xfer(priv, offset, val, bytes, true);
> > +}
> > +
> > +static int abx80x_setup_nvmem(struct abx80x_priv *priv)
> > +{
> > + struct nvmem_config config = {
> > + .type = NVMEM_TYPE_BATTERY_BACKED,
> > + .reg_read = abx80x_nvmem_read,
> > + .reg_write = abx80x_nvmem_write,
> > + .size = ABX8XX_RAM_SIZE,
> > + .priv = priv,
> > + };
> > +
> > + return devm_rtc_nvmem_register(priv->rtc, &config);
> > +}
> > +
> > static int abx80x_probe(struct i2c_client *client,
> > const struct i2c_device_id *id)
> > {
> > @@ -824,6 +897,10 @@ static int abx80x_probe(struct i2c_client *client,
> > return err;
> > }
> >
> > + err = abx80x_setup_nvmem(priv);
> > + if (err)
> > + return err;
> > +
> > if (client->irq > 0) {
> > dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
> > err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
>
> ping?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/rtc/rtc-abx80x.c?id=e90ff8ede777b98b44611b416b1ae6be94258335
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
