Re: [PATCH V2 0/7] rtc: ls2x: Add support for the Loongson-2K/LS7A RTC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/01/2023 09:35:10+0800, Binbin Zhou wrote:
> Hi all:
> 
> The initial DT-base ls2x rtc driver was written by Wang Xuerui, He has
> released five versions of patchset before, and all related mail records
> are shown below if you are interested:
> 
> https://lore.kernel.org/all/?q=ls2x-rtc
> 
> In this series of patches, based on the code above, I have added the
> following support:
> 
> 1. Add ACPI-related support, as Loongson-3A5000 + LS7A is now ACPI-base
>    by default under LoongArch architecture;
> 2. Add rtc alarm/walarm related functions.
> 
> I have tested on Loongson-3A5000LA+LS7A1000/LS7A2000, Loongson-2K1000LA
> and Loongson-2K0500.
> 
> BTW:
> There have been discussions about merging the rtc drivers of ls1x and
> ls2x, but the following reasons made the merger difficult to achieve:
> 
> 1. ls1x does not support ACPI, for it is only on MIPS-based system;

This is not a good justification, you have to support both in your
driver anyway, as shown by your CONFIG_ACPI ifdefery.

> 2. ls1x does not support alarm function.

It is just a matter of clearing a single bit, this is not difficult at
all.

> 
> Thanks.
> 
> -------
> Changes since v1:
> 1. Rebased on top of latest loongarch-next;
> 2. Add interrupt descriptions to the ls2k and ls7a DTS files to avoid
> errors when the driver gets the IRQ number, Thanks to Qing Zhang for
> testing;
> 3. Remove some inexact CONFIG_ACPI.
> 
> Binbin Zhou (4):
>   rtc: Add support for the Loongson-2K/LS7A RTC
>   LoongArch: Enable LS2X RTC in loongson3_defconfig
>   MIPS: Loongson64: DTS: Add RTC support to LS7A
>   MIPS: Loongson64: DTS: Add RTC support to Loongson-2K
> 
> WANG Xuerui (3):
>   dt-bindings: rtc: Add Loongson LS2X RTC support
>   MIPS: Loongson: Enable LS2X RTC in loongson3_defconfig
>   MIPS: Loongson: Enable LS2X RTC in loongson2k_defconfig
> 
>  .../devicetree/bindings/rtc/trivial-rtc.yaml  |   2 +
>  arch/loongarch/configs/loongson3_defconfig    |   1 +
>  .../boot/dts/loongson/loongson64-2k1000.dtsi  |   7 +
>  arch/mips/boot/dts/loongson/ls7a-pch.dtsi     |   7 +
>  arch/mips/configs/loongson2k_defconfig        |   1 +
>  arch/mips/configs/loongson3_defconfig         |   1 +
>  drivers/rtc/Kconfig                           |  11 +
>  drivers/rtc/Makefile                          |   1 +
>  drivers/rtc/rtc-ls2x.c                        | 379 ++++++++++++++++++
>  9 files changed, 410 insertions(+)
>  create mode 100644 drivers/rtc/rtc-ls2x.c
> 
> -- 
> 2.31.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux