On 19/10/2022 09:39, Ibrahim Tilki wrote:
> Devicetree binding documentation for Analog Devices MAX313XX RTCs
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx>
> ---
> .../devicetree/bindings/rtc/adi,max313xx.yaml | 163 ++++++++++++++++++
> 1 file changed, 163 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
>
Thank you for your patch. There is something to discuss/improve.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rtc@68 {
> + reg = <0x68>;
> + compatible = "adi,max31329";
> + clocks = <&clkin>;
> + interrupt-parent = <&gpio>;
> + interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "INTB";
> + };
> + };
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rtc@68 {
> + reg = <0x68>;
> + compatible = "adi,max31331";
> + #clock-cells = <0>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>, <26 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "INTA", "INTB";
> + };
> + };
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rtc@69 {
> + reg = <0x69>;
> + compatible = "adi,max31341";
> + #clock-cells = <0>;
> + clocks = <&clkin>;
Drop the last example - it's basically the same as first, without
interrupts.
With that:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Best regards,
Krzysztof
