[PATCH 1/2] Microchip MCP795xx RTC driver patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



---
 drivers/rtc/rtc-mcp795.c | 428 +++++++++++++++++++++++++++++----------
 1 file changed, 322 insertions(+), 106 deletions(-)

diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
index 0d515b3df571..0e52812a8f85 100644
--- a/drivers/rtc/rtc-mcp795.c
+++ b/drivers/rtc/rtc-mcp795.c
@@ -3,13 +3,18 @@
  * SPI Driver for Microchip MCP795 RTC
  *
  * Copyright (C) Josef Gajdusek <atx@xxxxxxxx>
+ * Copyright (C) 2022 Simone Tollardo <simone.tollardo@xxxxxxxxx>
  *
  * based on other Linux RTC drivers
  *
  * Device datasheet:
- * https://ww1.microchip.com/downloads/en/DeviceDoc/22280A.pdf
+ * https://ww1.microchip.com/downloads/en/DeviceDoc/MCP7951X-MCP7952X-Battery-Backed-SPI-RTCC-20002300C.pdf
+ *
+ * Device errata:
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/MCP795XX-Family-Silicon-Errata-80000680D.pdf
  */
 
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -21,42 +26,164 @@
 #include <linux/delay.h>
 
 /* MCP795 Instructions, see datasheet table 3-1 */
-#define MCP795_EEREAD	0x03
-#define MCP795_EEWRITE	0x02
-#define MCP795_EEWRDI	0x04
-#define MCP795_EEWREN	0x06
-#define MCP795_SRREAD	0x05
-#define MCP795_SRWRITE	0x01
-#define MCP795_READ	0x13
-#define MCP795_WRITE	0x12
-#define MCP795_UNLOCK	0x14
-#define MCP795_IDWRITE	0x32
-#define MCP795_IDREAD	0x33
-#define MCP795_CLRWDT	0x44
-#define MCP795_CLRRAM	0x54
+#define MCP795_EEREAD			0x03
+#define MCP795_EEWRITE			0x02
+#define MCP795_EEWRDI			0x04
+#define MCP795_EEWREN			0x06
+#define MCP795_SRREAD			0x05
+#define MCP795_SRWRITE			0x01
+#define MCP795_READ			0x13
+#define MCP795_WRITE			0x12
+#define MCP795_UNLOCK			0x14
+#define MCP795_IDWRITE			0x32
+#define MCP795_IDREAD			0x33
+#define MCP795_CLRRAM			0x54
 
 /* MCP795 RTCC registers, see datasheet table 4-1 */
-#define MCP795_REG_SECONDS	0x01
-#define MCP795_REG_DAY		0x04
-#define MCP795_REG_MONTH	0x06
-#define MCP795_REG_CONTROL	0x08
-#define MCP795_REG_ALM0_SECONDS	0x0C
-#define MCP795_REG_ALM0_DAY	0x0F
-
-#define MCP795_ST_BIT		BIT(7)
-#define MCP795_24_BIT		BIT(6)
-#define MCP795_LP_BIT		BIT(5)
-#define MCP795_EXTOSC_BIT	BIT(3)
-#define MCP795_OSCON_BIT	BIT(5)
-#define MCP795_ALM0_BIT		BIT(4)
-#define MCP795_ALM1_BIT		BIT(5)
-#define MCP795_ALM0IF_BIT	BIT(3)
-#define MCP795_ALM0C0_BIT	BIT(4)
-#define MCP795_ALM0C1_BIT	BIT(5)
-#define MCP795_ALM0C2_BIT	BIT(6)
-
-#define SEC_PER_DAY		(24 * 60 * 60)
-
+#define MCP795_REG_TMSECONDS		0x00	/* Tenths of ms (=centi-seconds) */
+#define MCP795_REG_SECONDS		0x01
+#define MCP795_REG_MINUTES		0x02
+#define MCP795_REG_HOURS		0x03
+#define MCP795_REG_DAY			0x04
+#define MCP795_REG_DATE			0x05
+#define MCP795_REG_MONTH		0x06
+#define MCP795_REG_YEAR			0x07
+#define MCP795_REG_CONTROL		0x08
+#define MCP795_REG_OSC_TRIM		0x09
+/* Alarm 0 */
+#define MCP795_REG_ALM0_SECONDS		0x0C
+#define MCP795_REG_ALM0_MINUTES		0x0D
+#define MCP795_REG_ALM0_HOURS		0x0E
+#define MCP795_REG_ALM0_DAY		0x0F
+#define MCP795_REG_ALM0_DATE		0x10
+#define MCP795_REG_ALM0_MONTH		0x11	/* Month only for alarm 0 */
+/* Alarm 1 */
+#define MCP795_REG_ALM1_TMSECONDS	0x12	/* Centi-seconds only for alarm 1 */
+#define MCP795_REG_ALM1_SECONDS		0x13
+#define MCP795_REG_ALM1_MINUTES		0x14
+#define MCP795_REG_ALM1_HOURS		0x15
+#define MCP795_REG_ALM1_DAY		0x16
+#define MCP795_REG_ALM1_DATE		0x17
+
+/* Power-Fail Timestamp */
+/* Power-Down Timetsamp */
+#define MCP795_REG_PWD_MINUTES		0x18
+#define MCP795_REG_PWD_HOURS		0x19
+#define MCP795_REG_PWD_DATE		0x1A
+#define MCP795_REG_PWD_MONTH		0x1B
+/* Power-Up Timestamp */
+#define MCP795_REG_PUP_MINUTES		0x1C
+#define MCP795_REG_PUP_HOURS		0x1D
+#define MCP795_REG_PUP_DATE		0x1E
+#define MCP795_REG_PUP_MONTH		0x1F
+
+/* MCP795_REG_CONTROL bits */
+
+/* MISC */
+#define MCP795_ST_BIT			BIT(7)	/* Status bit */
+#define MCP795_24_BIT			BIT(6)	/* 12/24 hour mode */
+#define MCP795_LP_BIT			BIT(5)	/* Leap Year */
+#define MCP795_OSCRUN_BIT		BIT(5)  /* Oscillator Run */
+#define MCP795_PWRFAIL_BIT		BIT(4)  /* Power Fail */
+#define MCP795_VBATEN_BIT		BIT(3)  /* VBAT Enable */
+
+/* RTCC 0x08 register bits */
+#define MCP795_SQWEN_BIT		BIT(6)  /* Square Wave Enable (MFP pin) */
+#define MCP795_ALM1_EN_BIT		BIT(5)  /* Alarm 1 Enable */
+#define MCP795_ALM0_EN_BIT		BIT(4)  /* Alarm 0 Enable */
+#define MCP795_EXTOSC_BIT		BIT(3)	/* External Oscillator */
+#define MCP795_CRSTRIM_BIT		BIT(2)  /* Crystal Trim */
+#define MCP795_SQWFS_BIT_H		BIT(1)  /* Square Wave Frequency Select H */
+#define MCP795_SQWFS_BIT_L		BIT(0)  /* Square Wave Frequency Select L */
+
+/* Alarms (0 and 1) */
+
+/* Centi-seconds - ALARM 1 ONLY */
+/* Alarms BCD Decimal Values of Centi-Second's Tens Digit (=deci-seconds) */
+#define MCP795_ALM1_CSEC_T_C0_BIT	BIT(4)
+#define MCP795_ALM1_CSEC_T_C1_BIT	BIT(5)
+#define MCP795_ALM1_CSEC_T_C2_BIT	BIT(6)
+#define MCP795_ALM1_CSEC_T_C3_BIT	BIT(6)
+/* Alarms BCD Decimal Values of Centi-Second's Ones Digit (=centi-seconds) */
+#define MCP795_ALM1_CSEC_O_C0_BIT	BIT(0)
+#define MCP795_ALM1_CSEC_O_C1_BIT	BIT(1)
+#define MCP795_ALM1_CSEC_O_C2_BIT	BIT(2)
+#define MCP795_ALM1_CSEC_O_C3_BIT	BIT(3)
+
+/* Seconds */
+/* Alarms BCD Decimal Values of Second's Tens Digit */
+#define MCP795_ALM_SEC_T_C0_BIT		BIT(4)
+#define MCP795_ALM_SEC_T_C1_BIT		BIT(5)
+#define MCP795_ALM_SEC_T_C2_BIT		BIT(6)
+/* Alarms BCD Decimal Values of Second's Ones Digit */
+#define MCP795_ALM_SEC_O_C0_BIT		BIT(0)
+#define MCP795_ALM_SEC_O_C1_BIT		BIT(1)
+#define MCP795_ALM_SEC_O_C2_BIT		BIT(2)
+#define MCP795_ALM_SEC_O_C3_BIT		BIT(3)
+
+/* Minutes */
+/* Alarms BCD Decimal Values of Minute's Tens Digit */
+#define MCP795_ALM_MIN_T_C0_BIT		BIT(4)
+#define MCP795_ALM_MIN_T_C1_BIT		BIT(5)
+#define MCP795_ALM_MIN_T_C2_BIT		BIT(6)
+/* Alarms BCD Decimal Values of Minute's Ones Digit */
+#define MCP795_ALM_MIN_O_C0_BIT		BIT(0)
+#define MCP795_ALM_MIN_O_C1_BIT		BIT(1)
+#define MCP795_ALM_MIN_O_C2_BIT		BIT(2)
+#define MCP795_ALM_MIN_O_C3_BIT		BIT(3)
+
+/* Hours */
+/* Alarms BCD Decimal Values of Hour's Tens Digit */
+#define MCP795_ALM_HOUR_T_C0_BIT	BIT(4)
+/* Alarms BCD Decimal Values of Hour's Ones Digit */
+#define MCP795_ALM_HOUR_O_C0_BIT	BIT(0)
+#define MCP795_ALM_HOUR_O_C1_BIT	BIT(1)
+#define MCP795_ALM_HOUR_O_C2_BIT	BIT(2)
+#define MCP795_ALM_HOUR_O_C3_BIT	BIT(3)
+
+/* Days */
+/* Alarms Interrupt Flag */
+#define MCP795_ALM_IF_BIT		BIT(3)
+/* Alarms BCD Decimal Values of Day's Ones Digit */
+#define MCP795_ALM_DAY_O_C0_BIT		BIT(0)
+#define MCP795_ALM_DAY_O_C1_BIT		BIT(1)
+#define MCP795_ALM_DAY_O_C2_BIT		BIT(2)
+
+/* Date */
+/* Alarms BCD Decimal Values of Date's Tens Digit */
+#define MCP795_ALM_DATE_T_C0_BIT	BIT(4)
+#define MCP795_ALM_DATE_T_C1_BIT	BIT(5)
+/* Alarms BCD Decimal Values of Date's Ones Digit */
+#define MCP795_ALM_DATE_O_C0_BIT	BIT(0)
+#define MCP795_ALM_DATE_O_C1_BIT	BIT(1)
+#define MCP795_ALM_DATE_O_C2_BIT	BIT(2)
+#define MCP795_ALM_DATE_O_C3_BIT	BIT(3)
+
+/* Months */
+/* Alarms BCD Decimal Values of Month's Tens Digit */
+#define MCP795_ALM0_MONTH_T_C0_BIT	BIT(3)
+/* Alarms BCD Decimal Values of Month's Ones Digit */
+#define MCP795_ALM0_MONTH_O_C0_BIT	BIT(0)
+#define MCP795_ALM0_MONTH_O_C1_BIT	BIT(1)
+#define MCP795_ALM0_MONTH_O_C2_BIT	BIT(2)
+#define MCP795_ALM0_MONTH_O_C3_BIT	BIT(3)
+
+/* Alarms Masks */
+#define MCP795_ALM_MASKS_BIT		BIT(4)
+
+/* BCD mask values for alarm matching - need BCD conversion */
+#define MCP795_ALM_MASK_SEC		0x00
+#define MCP795_ALM_MASK_MIN		0x01
+#define MCP795_ALM_MASK_HOUR		0x02
+#define MCP795_ALM_MASK_DAY		0x03
+#define MCP795_ALM_MASK_DATE		0x04
+#define MCP795_ALM_MASK_CSEC		0x05
+#define MCP795_ALM_MASK_ALL		0x07
+
+
+#define SEC_PER_DAY			(24 * 60 * 60)
+
+/* NOTE: count is size in bytes */
 static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
 {
 	struct spi_device *spi = to_spi_device(dev);
@@ -65,11 +192,11 @@ static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
 
 	tx[0] = MCP795_READ;
 	tx[1] = addr;
+	/* count in bytes */
 	ret = spi_write_then_read(spi, tx, sizeof(tx), buf, count);
 
 	if (ret)
-		dev_err(dev, "Failed reading %d bytes from address %x.\n",
-					count, addr);
+		dev_err(dev, "Failed reading %d bytes from address %x.\n", count, addr);
 
 	return ret;
 }
@@ -87,8 +214,7 @@ static int mcp795_rtcc_write(struct device *dev, u8 addr, u8 *data, u8 count)
 	ret = spi_write(spi, tx, 2 + count);
 
 	if (ret)
-		dev_err(dev, "Failed to write %d bytes to address %x.\n",
-					count, addr);
+		dev_err(dev, "Failed to write %d bytes to address %x.\n", count, addr);
 
 	return ret;
 }
@@ -124,16 +250,17 @@ static int mcp795_stop_oscillator(struct device *dev, bool *extosc)
 		return ret;
 	*extosc = !!(data & MCP795_EXTOSC_BIT);
 	ret = mcp795_rtcc_set_bits(
-				dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, 0);
+			dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, 0);
 	if (ret)
 		return ret;
-	/* wait for the OSCON bit to clear */
+
+	/* wait for the OSCRUN bit to clear */
 	do {
 		usleep_range(700, 800);
 		ret = mcp795_rtcc_read(dev, MCP795_REG_DAY, &data, 1);
 		if (ret)
 			break;
-		if (!(data & MCP795_OSCON_BIT))
+		if (!(data & MCP795_OSCRUN_BIT))
 			break;
 
 	} while (--retries);
@@ -143,17 +270,33 @@ static int mcp795_stop_oscillator(struct device *dev, bool *extosc)
 
 static int mcp795_start_oscillator(struct device *dev, bool *extosc)
 {
-	if (extosc) {
-		u8 data = *extosc ? MCP795_EXTOSC_BIT : 0;
-		int ret;
-
-		ret = mcp795_rtcc_set_bits(
-			dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, data);
-		if (ret)
-			return ret;
-	}
-	return mcp795_rtcc_set_bits(
-			dev, MCP795_REG_SECONDS, MCP795_ST_BIT, MCP795_ST_BIT);
+        int ret;
+        int retries = 5;
+        if (extosc) {
+			u8 data = *extosc ? MCP795_EXTOSC_BIT : 0;
+			ret = mcp795_rtcc_set_bits(
+					dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, data);
+			if (ret)
+				return ret;
+        }
+        ret = mcp795_rtcc_set_bits(
+                	dev, MCP795_REG_SECONDS, MCP795_ST_BIT, MCP795_ST_BIT);
+        if (ret)
+            return ret;
+
+        /* wait for the OSCRUN bit to set */
+        do {
+			u8 data = MCP795_OSCRUN_BIT;
+			usleep_range(700, 800);
+			ret = mcp795_rtcc_read(dev, MCP795_REG_DAY, &data, 1);
+			if (ret)
+				break;
+			if ((data & MCP795_OSCRUN_BIT))
+				break;
+
+        } while (--retries);
+
+        return !retries ? -EIO : ret;
 }
 
 /* Enable or disable Alarm 0 in RTC */
@@ -164,18 +307,24 @@ static int mcp795_update_alarm(struct device *dev, bool enable)
 	dev_dbg(dev, "%s alarm\n", enable ? "Enable" : "Disable");
 
 	if (enable) {
+		/* Disable Square Wave Function to enable Alarm output */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_SQWEN_BIT, 0);
 		/* clear ALM0IF (Alarm 0 Interrupt Flag) bit */
 		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_ALM0_DAY,
-					MCP795_ALM0IF_BIT, 0);
+					MCP795_ALM_IF_BIT, 0);
 		if (ret)
 			return ret;
 		/* enable alarm 0 */
 		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
-					MCP795_ALM0_BIT, MCP795_ALM0_BIT);
+					MCP795_ALM0_EN_BIT, MCP795_ALM0_EN_BIT);
 	} else {
 		/* disable alarm 0 and alarm 1 */
 		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
-					MCP795_ALM0_BIT | MCP795_ALM1_BIT, 0);
+					MCP795_ALM0_EN_BIT | MCP795_ALM1_EN_BIT, 0);
+		/* Disable Alarm output to let enable Square Wave Function */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_SQWEN_BIT, 0);
 	}
 	return ret;
 }
@@ -183,7 +332,7 @@ static int mcp795_update_alarm(struct device *dev, bool enable)
 static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
 {
 	int ret;
-	u8 data[7];
+	u8 data[8];
 	bool extosc;
 
 	/* Stop RTC and store current value of EXTOSC bit */
@@ -192,32 +341,41 @@ static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
 		return ret;
 
 	/* Read first, so we can leave config bits untouched */
-	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
-
+	ret = mcp795_rtcc_read(dev, MCP795_REG_TMSECONDS, data, sizeof(data));
 	if (ret)
 		return ret;
 
-	data[0] = (data[0] & 0x80) | bin2bcd(tim->tm_sec);
-	data[1] = (data[1] & 0x80) | bin2bcd(tim->tm_min);
-	data[2] = bin2bcd(tim->tm_hour);
-	data[3] = (data[3] & 0xF8) | bin2bcd(tim->tm_wday + 1);
-	data[4] = bin2bcd(tim->tm_mday);
-	data[5] = (data[5] & MCP795_LP_BIT) | bin2bcd(tim->tm_mon + 1);
-
-	if (tim->tm_year > 100)
-		tim->tm_year -= 100;
-
-	data[6] = bin2bcd(tim->tm_year);
-
-	/* Always write the date and month using a separate Write command.
-	 * This is a workaround for a know silicon issue that some combinations
-	 * of date and month values may result in the date being reset to 1.
-	 */
-	ret = mcp795_rtcc_write(dev, MCP795_REG_SECONDS, data, 5);
+	data[0] = 0x00;	//centiseconds not implemented
+	data[1] = (data[1] & 0x80) | bin2bcd(tim->tm_sec);
+	data[2] = (data[2] & 0x80) | bin2bcd(tim->tm_min);
+	data[3] = (data[3] & 0xC0) | bin2bcd(tim->tm_hour);
+	/* Add one beacause Linux weekday is from 0 to 6 */
+	data[4] = (data[4] & 0xF8) | bin2bcd(tim->tm_wday + 1);
+	data[5] = (data[5] & 0xC0) | bin2bcd(tim->tm_mday);
+	/* Add one because Linux month is from 0 to 11 */
+	data[6] = (data[6] & 0xC0) | ((data[6] & MCP795_LP_BIT)
+					| bin2bcd(tim->tm_mon + 1));
+	data[7] = bin2bcd(tim->tm_year);
+
+	/* Set time sequence needed to avoid common device problems, see errata */
+	/* Write month */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[6], 1);
 	if (ret)
 		return ret;
-
-	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[5], 2);
+	/* Write data (month day) */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_DATE, &data[5], 1);
+	if (ret)
+		return ret;
+	/* Write month again */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[6], 1);
+	if (ret)
+		return ret;
+	/* Send the rest apart from year and dayweek */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_TMSECONDS, data, 4);
+	if (ret)
+	 	return ret;
+	/* Send the year */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_YEAR, &data[7], 1);
 	if (ret)
 		return ret;
 
@@ -229,6 +387,14 @@ static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
 	if (ret)
 		return ret;
 
+	/* Always set the weekday using a separate Write command and when
+	 * oscillator is running.
+	 * This is a workaround for a know silicon issue.
+	 */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_DAY, &data[4], 1);
+	if (ret)
+		return ret;
+
 	dev_dbg(dev, "Set mcp795: %ptR\n", tim);
 
 	return 0;
@@ -237,20 +403,23 @@ static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
 static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
 {
 	int ret;
-	u8 data[7];
+	u8 data[8];
+	int tm_c_sec;
 
-	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
+	ret = mcp795_rtcc_read(dev, MCP795_REG_TMSECONDS, data, sizeof(data));
 
 	if (ret)
 		return ret;
 
-	tim->tm_sec	= bcd2bin(data[0] & 0x7F);
-	tim->tm_min	= bcd2bin(data[1] & 0x7F);
-	tim->tm_hour	= bcd2bin(data[2] & 0x3F);
-	tim->tm_wday	= bcd2bin(data[3] & 0x07) - 1;
-	tim->tm_mday	= bcd2bin(data[4] & 0x3F);
-	tim->tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
-	tim->tm_year	= bcd2bin(data[6]) + 100; /* Assume we are in 20xx */
+	tm_c_sec 	= bcd2bin(data[0] & 0xFF);
+	tim->tm_sec	= bcd2bin(data[1] & 0x7F);
+	tim->tm_min	= bcd2bin(data[2] & 0x7F);
+	/* This is only for 24h mode, see datasheet for 12h mode */
+	tim->tm_hour	= bcd2bin(data[3] & 0x3F);
+	tim->tm_wday	= bcd2bin(data[4] & 0x07) - 1;
+	tim->tm_mday	= bcd2bin(data[5] & 0x3F);
+	tim->tm_mon	= bcd2bin(data[6] & 0x1F) - 1;
+	tim->tm_year	= bcd2bin(data[7]);
 
 	dev_dbg(dev, "Read from mcp795: %ptR\n", tim);
 
@@ -265,6 +434,17 @@ static int mcp795_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	u8 tmp[6];
 	int ret;
 
+	/* Set Alarm 0 Mask to match all */
+	/* Read first, so we can leave other bits untouched */
+	ret = mcp795_rtcc_read(dev, MCP795_REG_ALM0_DAY, tmp, 1);
+	if (ret)
+		return ret;
+	/* Set Alarm 0 Mask to match all */
+	tmp[0] = (tmp[0] & 0x8F) | (bin2bcd(MCP795_ALM_MASK_ALL) << 4);
+	ret = mcp795_rtcc_write(dev, MCP795_REG_ALM0_DAY, tmp, 1);
+	if(ret)
+		return ret;
+
 	/* Read current time from RTC hardware */
 	ret = mcp795_read_time(dev, &now_tm);
 	if (ret)
@@ -291,12 +471,14 @@ static int mcp795_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	alm->time.tm_isdst	= -1;
 	alm->time.tm_yday	= -1;
 
+	/* set alarm match: seconds, minutes, hour, day, date and month */
 	tmp[0] = (tmp[0] & 0x80) | bin2bcd(alm->time.tm_sec);
 	tmp[1] = (tmp[1] & 0x80) | bin2bcd(alm->time.tm_min);
 	tmp[2] = (tmp[2] & 0xE0) | bin2bcd(alm->time.tm_hour);
 	tmp[3] = (tmp[3] & 0x80) | bin2bcd(alm->time.tm_wday + 1);
-	/* set alarm match: seconds, minutes, hour, day, date and month */
-	tmp[3] |= (MCP795_ALM0C2_BIT | MCP795_ALM0C1_BIT | MCP795_ALM0C0_BIT);
+	/* ALMxIF cleared in the update function */
+	tmp[3] |= (MCP795_ALM_SEC_T_C2_BIT | MCP795_ALM_SEC_T_C1_BIT
+					| MCP795_ALM_SEC_T_C0_BIT);
 	tmp[4] = (tmp[4] & 0xC0) | bin2bcd(alm->time.tm_mday);
 	tmp[5] = (tmp[5] & 0xE0) | bin2bcd(alm->time.tm_mon + 1);
 
@@ -309,10 +491,15 @@ static int mcp795_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 		ret = mcp795_update_alarm(dev, true);
 		if (ret)
 			return ret;
+		alm->pending = 1;
 		dev_dbg(dev, "Alarm IRQ armed\n");
 	}
-	dev_dbg(dev, "Set alarm: %ptRdr(%d) %ptRt\n",
-		&alm->time, alm->time.tm_wday, &alm->time);
+
+	/* do not print year, it's not implemented in the RTC hardware */
+	dev_dbg(dev, "Set alarm: %02d-%02dT%02d:%02d:%02d\n", alm->time.tm_mon + 1,
+			alm->time.tm_mday, alm->time.tm_hour, alm->time.tm_min,
+			alm->time.tm_sec);
+
 	return 0;
 }
 
@@ -321,8 +508,7 @@ static int mcp795_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	u8 data[6];
 	int ret;
 
-	ret = mcp795_rtcc_read(
-			dev, MCP795_REG_ALM0_SECONDS, data, sizeof(data));
+	ret = mcp795_rtcc_read(dev, MCP795_REG_ALM0_SECONDS, data, sizeof(data));
 	if (ret)
 		return ret;
 
@@ -336,8 +522,18 @@ static int mcp795_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	alm->time.tm_isdst	= -1;
 	alm->time.tm_yday	= -1;
 
-	dev_dbg(dev, "Read alarm: %ptRdr(%d) %ptRt\n",
-		&alm->time, alm->time.tm_wday, &alm->time);
+	alm->pending = !!(data[3] & MCP795_ALM_IF_BIT);
+
+	ret = mcp795_rtcc_read(dev, MCP795_REG_CONTROL, data, 1);
+	if (ret)
+		return ret;
+	alm->enabled = !!(data[0] & MCP795_ALM0_EN_BIT);
+
+	/* Do not print year, it's not implemented in the RTC hardware */
+	dev_dbg(dev, "Read alarm: %02d-%02dT%02d:%02d:%02d\n", alm->time.tm_mon + 1,
+			alm->time.tm_mday, alm->time.tm_hour, alm->time.tm_min,
+			alm->time.tm_sec);
+
 	return 0;
 }
 
@@ -361,7 +557,8 @@ static irqreturn_t mcp795_irq(int irq, void *data)
 	ret = mcp795_update_alarm(&spi->dev, false);
 	if (ret)
 		dev_err(&spi->dev,
-			"Failed to disable alarm in IRQ (ret=%d)\n", ret);
+				"Failed to disable alarm in IRQ (ret=%d)\n", ret);
+
 	rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
 
 	rtc_unlock(rtc);
@@ -381,6 +578,7 @@ static int mcp795_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
 	int ret;
+	u8 data;
 
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
@@ -393,38 +591,56 @@ static int mcp795_probe(struct spi_device *spi)
 	/* Start the oscillator but don't set the value of EXTOSC bit */
 	mcp795_start_oscillator(&spi->dev, NULL);
 	/* Clear the 12 hour mode flag*/
-	mcp795_rtcc_set_bits(&spi->dev, 0x03, MCP795_24_BIT, 0);
+	mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_HOURS, MCP795_24_BIT, 0);
 
 	rtc = devm_rtc_device_register(&spi->dev, "rtc-mcp795",
-					&mcp795_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
+						&mcp795_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)){
+		return PTR_ERR(rtc);}
 
 	spi_set_drvdata(spi, rtc);
 
 	if (spi->irq > 0) {
 		dev_dbg(&spi->dev, "Alarm support enabled\n");
-
 		/* Clear any pending alarm (ALM0IF bit) before requesting
 		 * the interrupt.
 		 */
 		mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_ALM0_DAY,
-					MCP795_ALM0IF_BIT, 0);
+						MCP795_ALM_IF_BIT, 0);
 		ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
-				mcp795_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				dev_name(&rtc->dev), spi);
+						mcp795_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+						dev_name(&rtc->dev), spi);
 		if (ret)
 			dev_err(&spi->dev, "Failed to request IRQ: %d: %d\n",
-						spi->irq, ret);
+					spi->irq, ret);
 		else
 			device_init_wakeup(&spi->dev, true);
 	}
+
+	/* If PWRFAIL BIT is set, it must be cleared */
+	ret = mcp795_rtcc_read(&spi->dev, MCP795_REG_DAY, &data, 1);
+	if (ret)
+		return ret;
+
+	if(!!(data & MCP795_PWRFAIL_BIT))
+	{
+		ret = mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_DAY,
+						MCP795_PWRFAIL_BIT, 0);
+		if (ret)
+			return ret;
+	}
+	/* Set VBAT FLAG TO 1 */
+	ret = mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_DAY, MCP795_VBATEN_BIT,
+							MCP795_VBATEN_BIT);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
 #ifdef CONFIG_OF
 static const struct of_device_id mcp795_of_match[] = {
-	{ .compatible = "maxim,mcp795" },
+	{ .compatible = "microchip,mcp795" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp795_of_match);
-- 
2.37.3




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux