Hello, This small series adds support for the RZ/N1 RTC. Despite its limitations, I found useful to at least have alarm and offset support. Cheers, Miquèl Changes in v6: * Fix a sparse warning by dropping a variable not really used and replaced by a comment. Changes in v5: * Dropped a (now) useless header that could produce a build error. Changes in v4: * Collected more tags (on the DT bindings). * Fixed the name of the SoC in the header: RZ/N1 instead of RZN1. * Dropped the error message when the alarm IRQ is not available (already handled by the core) * Used pm_runtime_put() instead of pm_runtime_put_sync(). * Used pm_runtime_resume_and_get() instead of pm_runtime_get(). * Used devm_pm_runtime_enable() instead of pm_runtime_enable(). Changes in v3: * Collected tags. * s/soc:/clk:/ in the clock commit title. * Dropped the RTC hclk fix which has already been applied. * Added the power-domain properties both in the bindings and in the DT. * Used runtime PM to enable the clock instead of using the clk API directly. Changes in v2: * Fixed the error path in the clk driver, where I missed to release a spin_lock. * Collected tags. * Moved the rtc subnode in the dt to keep the nodes ordered by unit address. * Dropped the useless "oneOf" statement in the bindings (compatible property). * Dropped the start-year property in the bindings (already defined). * Avoided rollover calculations that could be more easily handled (and reviewed) with a time64_t conversion. * Returned ERANGE instead of EOPNOTSUPP when the alarm date is not valid. * Cleared RTC_FEATURE_UPDATE_INTERRUPT to avoid warning from the tools. * Dropped the sysctl patch adding the reset helper, instead fulfilled the description of the RTC clock so that when requesting this clock to be enabled, the idle bit is released. * Avoided rollover calculations that could be more easily handled (and reviewed) with a time64_t conversion. * Fixed the max_range value, after a rtc-range test and looking at other implementations. Michel Pollet (1): rtc: rzn1: Add new RTC driver Miquel Raynal (4): dt-bindings: rtc: rzn1: Describe the RZN1 RTC rtc: rzn1: Add alarm support rtc: rzn1: Add oscillator offset support MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver .../bindings/rtc/renesas,rzn1-rtc.yaml | 70 +++ MAINTAINERS | 8 + drivers/rtc/Kconfig | 7 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rzn1.c | 422 ++++++++++++++++++ 5 files changed, 508 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml create mode 100644 drivers/rtc/rtc-rzn1.c -- 2.27.0
