Hey all, This is technically a v2 of [0], although a fair bit of time has passed since then. In the meantime I upstreamed the dt-binding, which was in the v1, and this patch depends on the fixes to the dt-binding and device tree etc which landed in v5.18-rc5. The driver is quite substantially rewritten from the v1, as you wanted it to be switched to "binary" rather than calendar mode - so hopefully I have satisfied your concerns with the original driver. Specifically you had an significant issue with the counter being reset on startup & that is no longer the case. Thanks, Conor. Changes from v1: - remove duplicate and unused defines - remove oneline mpfs_rtc_set_prescaler function - dont unconditionally turn off the rtc in the init function - dont reset the rtc when init is run. - dont disable the alarm when we boot - use binary, not calendar mode - delete mpfs_rtc_init & set prescale in probe - use dev_pm_set_wake_irq rather than writing suspend/resume functions - delete calendar mode only register defines - since using binary mode, set range min to zero - set range max to max alarm value (is this acceptable?) - added a MAINTAINERS entry: when v1 was submitted there was nothing to add to, but there is now. [0] https://lore.kernel.org/linux-rtc/20210512111133.1650740-1-daire.mcnamara@xxxxxxxxxxxxx/ Conor Dooley (2): rtc: Add driver for Microchip PolarFire SoC MAINTAINERS: add PolarFire SoC's RTC MAINTAINERS | 1 + drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mpfs.c | 328 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 340 insertions(+) create mode 100644 drivers/rtc/rtc-mpfs.c base-commit: c5eb0a61238dd6faf37f58c9ce61c9980aaffd7a -- 2.36.1
