Attach the interrupt as a wake-irq to the device, so that:
- A corresponding wakeup source is created (and reported in e.g
/sys/kernel/debug/wakeup_sources).
- The power subsystem take cares of arming/disarming
irq-wake automatically on suspend/resume.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
drivers/rtc/rtc-pm8xxx.c | 31 ++++++++++---------------------
1 file changed, 10 insertions(+), 21 deletions(-)
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 29a1c65..75954dd 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -7,6 +7,7 @@
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -527,40 +528,28 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
return rc;
}
- return devm_rtc_register_device(rtc_dd->rtc);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int pm8xxx_rtc_resume(struct device *dev)
-{
- struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ rc = devm_rtc_register_device(rtc_dd->rtc);
+ if (rc)
+ return rc;
- if (device_may_wakeup(dev))
- disable_irq_wake(rtc_dd->rtc_alarm_irq);
+ rc = dev_pm_set_wake_irq(&pdev->dev, rtc_dd->rtc_alarm_irq);
+ if (rc)
+ return rc;
return 0;
}
-static int pm8xxx_rtc_suspend(struct device *dev)
+static int pm8xxx_remove(struct platform_device *pdev)
{
- struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
-
- if (device_may_wakeup(dev))
- enable_irq_wake(rtc_dd->rtc_alarm_irq);
-
+ dev_pm_clear_wake_irq(&pdev->dev);
return 0;
}
-#endif
-
-static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops,
- pm8xxx_rtc_suspend,
- pm8xxx_rtc_resume);
static struct platform_driver pm8xxx_rtc_driver = {
.probe = pm8xxx_rtc_probe,
+ .remove = pm8xxx_remove,
.driver = {
.name = "rtc-pm8xxx",
- .pm = &pm8xxx_rtc_pm_ops,
.of_match_table = pm8xxx_id_table,
},
};
--
2.7.4
