On Wed, Jan 12, 2022 at 05:57:25PM +0100, Alexandre Belloni wrote: > On 12/01/2022 11:53:59-0500, Nícolas F. R. A. Prado wrote: > > The timeout setting for the rtc kselftest is currently 90 seconds. > > However, two of the tests set alarms, which take one minute to complete > > each. So the timeout should be at least 120. Set it to 180, so that all > > tests are able to complete and still have some slack. > > Hum, I don't get the logic from that, a test takes up to 60 seconds and > the timeout is 90s per test so we already have plenty of slack there. Actually I did re-test locally and it is an issue since the 90s timeout is not per-test, but to the whole rtc test suite. Also it requires running the test through the selftest runner, and since the alarm is set to the next top of the minute, you might get lucky and it might all take less than 90 seconds. However none of this was clear in my original commit message, so I'll send a v2 with a better explanation. Thanks, Nícolas
