Hello, This patch series fixes some issues in the RTC CMOS handling code: 1. A missing spin_lock_irq() / spin_unlock_irq() pair in cmos_set_alarm(). 2. A failing presence check of the RTC: the clock was misdetected as broken since Linux 5.11 on one of our home systems. 3. Do not touch the RTC alarm registers when the RTC update is in progress. (On some Intel chipsets, this causes bogus values being read or writes to fail silently.) This is my first patch series, so please review carefully. v2: Drop the last patch: Revert "rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ" which was made obsolete by mainlining of commit 13be2efc390a ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()") v3: Rework solution to problem 3 (I'd like to thank Greg KH for comment), drop x86 refactoring patches (I'll send them later). v4: Fixed some issues pointed out by Mr Alexandre Belloni: - do not add strings to rtc-mc146818-lib.c - I moved the error printing code to callers of mc146818_get_time(). This resulted in two new patches in the series, - other small issues. v5: Increase maximum accepted duration of the UIP high pulse from 10 to 20ms, in case there are some very slow chips out there. Note: this may cause problems with hpet_rtc_interrupt() if the CMOS RTC stops working while the system is running and RTC update interrupt / RTC alarm interrupt is enabled (which should be rare). In this case, hpet_rtc_interrupt() is executed 64 times per second and takes up to 20ms to complete - which may constantly occupy one CPU. I am not sure if this is likely enough to implement special handling of this case in hpet_rtc_interrupt(). I have noticed that mach_get_cmos_time() in arch/x86/kernel/rtc.c performs a similar function to mc146818_get_time() in drivers/rtc/rtc-cmos.c . In the future, I'm going to post a new series that removes this duplicated code and makes mach_get_cmos_time() use mc146818_get_time(). This will likely include reducing polling interval in mc146818_avoid_UIP() from 1ms to 100us to make it more similar to mach_get_cmos_time()'s current behaviour. Greetings, Mateusz Signed-off-by: Mateusz Jończyk <mat.jonczyk@xxxxx> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>