Backup Switch Mode is currently set properly when the trickle charger is
enabled. However, in the case of a non-rechargeable battery, it is
necessary to be able to enable it, only allow that when the trickle charger
is disabled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
drivers/rtc/rtc-rv3032.c | 78 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/drivers/rtc/rtc-rv3032.c b/drivers/rtc/rtc-rv3032.c
index 1b62ed2f1459..ba189f2f36c4 100644
--- a/drivers/rtc/rtc-rv3032.c
+++ b/drivers/rtc/rtc-rv3032.c
@@ -106,6 +106,7 @@
struct rv3032_data {
struct regmap *regmap;
struct rtc_device *rtc;
+ bool trickle_charger_set;
#ifdef CONFIG_COMMON_CLK
struct clk_hw clkout_hw;
#endif
@@ -402,6 +403,77 @@ static int rv3032_set_offset(struct device *dev, long offset)
FIELD_PREP(RV3032_OFFSET_MSK, offset));
}
+static int rv3032_param_get(struct device *dev, struct rtc_param *param)
+{
+ struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+ int ret;
+
+ switch(param->param) {
+ u32 value;
+
+ case RTC_PARAM_BACKUP_SWITCH_MODE:
+ ret = regmap_read(rv3032->regmap, RV3032_PMU, &value);
+ if (ret < 0)
+ return ret;
+
+ value = FIELD_GET(RV3032_PMU_BSM, value);
+
+ switch(value) {
+ case RV3032_PMU_BSM_DSM:
+ param->uvalue = RTC_BSM_DIRECT;
+ break;
+ case RV3032_PMU_BSM_LSM:
+ param->uvalue = RTC_BSM_LEVEL;
+ break;
+ default:
+ param->uvalue = RTC_BSM_DISABLED;
+ }
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rv3032_param_set(struct device *dev, struct rtc_param *param)
+{
+ struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+
+ switch(param->param) {
+ u8 mode;
+ case RTC_PARAM_BACKUP_SWITCH_MODE:
+ if (rv3032->trickle_charger_set)
+ return -EINVAL;
+
+ switch (param->uvalue) {
+ case RTC_BSM_DISABLED:
+ mode = 0;
+ break;
+ case RTC_BSM_DIRECT:
+ mode = 0x1;
+ break;
+ case RTC_BSM_LEVEL:
+ mode = 0x3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_BSM,
+ FIELD_PREP(RV3032_PMU_BSM, mode));
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int rv3032_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
@@ -541,6 +613,8 @@ static int rv3032_trickle_charger_setup(struct device *dev, struct rv3032_data *
return 0;
}
+ rv3032->trickle_charger_set = true;
+
return rv3032_update_cfg(rv3032, RV3032_PMU,
RV3032_PMU_TCR | RV3032_PMU_TCM | RV3032_PMU_BSM,
val | FIELD_PREP(RV3032_PMU_TCR, i));
@@ -813,6 +887,8 @@ static const struct rtc_class_ops rv3032_rtc_ops = {
.read_alarm = rv3032_get_alarm,
.set_alarm = rv3032_set_alarm,
.alarm_irq_enable = rv3032_alarm_irq_enable,
+ .param_get = rv3032_param_get,
+ .param_set = rv3032_param_set,
};
static const struct regmap_config regmap_config = {
@@ -883,6 +959,8 @@ static int rv3032_probe(struct i2c_client *client)
rv3032_trickle_charger_setup(&client->dev, rv3032);
+ set_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rv3032->rtc->features);
+
rv3032->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
rv3032->rtc->range_max = RTC_TIMESTAMP_END_2099;
rv3032->rtc->ops = &rv3032_rtc_ops;
--
2.31.1
