From: Biwen Li <biwen.li@xxxxxxx>
Clear these flags TSF1, TSF2 before enabling interrupt generation
Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
---
Change in v2:
- clear flag TSF2
drivers/rtc/rtc-pcf2127.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index a5418b657c50..7e3fc70ac5f9 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -659,7 +659,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
/*
* Enable timestamp function and store timestamp of first trigger
- * event until TSF1 and TFS2 interrupt flags are cleared.
+ * event until TSF1 and TSF2 interrupt flags are cleared.
*/
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_TS_CTRL,
PCF2127_BIT_TS_CTRL_TSOFF |
@@ -671,6 +671,31 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
return ret;
}
+ /*
+ * Clear TSF1 field of ctrl1 register and TSF2
+ * field of ctrl2 register to clear interrupt
+ * before enabling interrupt generation when
+ * timestamp flag set. Unless the flag TSF1 won't
+ * be cleared and get the interrupt storm.
+ */
+ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
+ PCF2127_BIT_CTRL1_TSF1,
+ 0);
+ if (ret) {
+ dev_err(dev, "%s: control and status register 1 (ctrl1) failed, ret = 0x%x\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
+ PCF2127_BIT_CTRL2_TSF2,
+ 0);
+ if (ret) {
+ dev_err(dev, "%s: control and status register 2 (ctrl2) failed, ret = 0x%x\n",
+ __func__, ret);
+ return ret;
+ }
+
/*
* Enable interrupt generation when TSF1 or TSF2 timestamp flags
* are set. Interrupt signal is an open-drain output and can be
--
2.17.1
