Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/rtc/rtc-ds1307.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index fcb8e281abd5..40300c872337 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -12,7 +12,8 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/property.h> #include <linux/rtc/ds1307.h> #include <linux/rtc.h> #include <linux/slab.h> @@ -30,6 +31,7 @@ * That's a natural job for a factory or repair bench. */ enum ds_type { + unknown_ds_type, /* always first and 0 */ ds_1307, ds_1308, ds_1337, @@ -1613,8 +1615,11 @@ static struct clk_init_data ds3231_clks_init[] = { static int ds3231_clks_register(struct ds1307 *ds1307) { - struct device_node *node = ds1307->dev->of_node; struct clk_onecell_data *onecell; + const char *ds3231_clks_names[] = { + [DS3231_CLK_SQW] = ds3231_clks_init[DS3231_CLK_SQW].name, + [DS3231_CLK_32KHZ] = ds3231_clks_init[DS3231_CLK_32KHZ].name, + }; int i; onecell = devm_kzalloc(ds1307->dev, sizeof(*onecell), GFP_KERNEL); @@ -1627,6 +1632,11 @@ static int ds3231_clks_register(struct ds1307 *ds1307) if (!onecell->clks) return -ENOMEM; + /* optional override of the clockname */ + device_property_read_string_array(ds1307->dev, "clock-output-names", + ds3231_clks_names, + ARRAY_SIZE(ds3231_clks_names)); + for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) { struct clk_init_data init = ds3231_clks_init[i]; @@ -1637,9 +1647,7 @@ static int ds3231_clks_register(struct ds1307 *ds1307) if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags)) continue; - /* optional override of the clockname */ - of_property_read_string_index(node, "clock-output-names", i, - &init.name); + init.name = ds3231_clks_names[i]; ds1307->clks[i].init = &init; onecell->clks[i] = devm_clk_register(ds1307->dev, @@ -1648,10 +1656,9 @@ static int ds3231_clks_register(struct ds1307 *ds1307) return PTR_ERR(onecell->clks[i]); } - if (!node) - return 0; - - of_clk_add_provider(node, of_clk_src_onecell_get, onecell); + if (ds1307->dev->of_node) + of_clk_add_provider(ds1307->dev->of_node, + of_clk_src_onecell_get, onecell); return 0; } @@ -1735,6 +1742,7 @@ static int ds1307_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ds1307 *ds1307; + const void *match; int err = -ENODEV; int tmp; const struct chip_desc *chip; @@ -1760,9 +1768,9 @@ static int ds1307_probe(struct i2c_client *client, i2c_set_clientdata(client, ds1307); - if (client->dev.of_node) { - ds1307->type = (enum ds_type) - of_device_get_match_data(&client->dev); + match = device_get_match_data(&client->dev); + if (match) { + ds1307->type = (enum ds_type)match; chip = &chips[ds1307->type]; } else if (id) { chip = &chips[id->driver_data]; @@ -1786,7 +1794,6 @@ static int ds1307_probe(struct i2c_client *client, trickle_charger_setup); } -#ifdef CONFIG_OF /* * For devices with no IRQ directly connected to the SoC, the RTC chip * can be forced as a wakeup source by stating that explicitly in @@ -1795,10 +1802,8 @@ static int ds1307_probe(struct i2c_client *client, * This will guarantee the 'wakealarm' sysfs entry is available on the device, * if supported by the RTC. */ - if (chip->alarm && of_property_read_bool(client->dev.of_node, - "wakeup-source")) + if (chip->alarm && device_property_read_bool(&client->dev, "wakeup-source")) ds1307_can_wakeup_device = true; -#endif switch (ds1307->type) { case ds_1337: -- 2.28.0