[PATCH v2 8/8] rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ds1307 charger infrastructure now allows to add a rx8130 charger
setup that..

- does not depend on trickle-resistor-ohms
- does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS)
  bits
- keeps previous no-charge behavior for device trees without
  aux-voltage-chargeable

Make that happen.

Signed-off-by: Bastian Krause <bst@xxxxxxxxxxxxxx>
---
No changes since v1.

v1 notes:
Based on:
- https://lore.kernel.org/linux-rtc/20200415163701.21989-1-bst@xxxxxxxxxxxxxx/
- https://lore.kernel.org/linux-rtc/20200415163701.21989-3-bst@xxxxxxxxxxxxxx/

Changes since then:
- use chager_reg (called trickle_charger_reg before patch 4/8)
- use charger setup function to set backup battery enable bit, charge
  bit optionally (introduced by patch 5/8)
---
 drivers/rtc/rtc-ds1307.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 9bf1822a989f..1fe0c2df2578 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -122,6 +122,9 @@ enum ds_type {
 #define RX8130_REG_FLAG_AF		BIT(3)
 #define RX8130_REG_CONTROL0		0x1e
 #define RX8130_REG_CONTROL0_AIE		BIT(3)
+#define RX8130_REG_CONTROL1		0x1f
+#define RX8130_REG_CONTROL1_INIEN	BIT(4)
+#define RX8130_REG_CONTROL1_CHGEN	BIT(5)
 
 #define MCP794XX_REG_CONTROL		0x07
 #	define MCP794XX_BIT_ALM0_EN	0x10
@@ -536,6 +539,16 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
 	return setup;
 }
 
+static u8 do_trickle_setup_rx8130(struct ds1307 *ds1307, u32 ohms, bool diode)
+{
+	/* make sure that the backup battery is enabled */
+	u8 setup = RX8130_REG_CONTROL1_INIEN;
+	if (diode)
+		setup |= RX8130_REG_CONTROL1_CHGEN;
+
+	return setup;
+}
+
 static irqreturn_t rx8130_irq(int irq, void *dev_id)
 {
 	struct ds1307           *ds1307 = dev_id;
@@ -1024,6 +1037,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.offset		= 0x10,
 		.irq_handler = rx8130_irq,
 		.rtc_ops = &rx8130_rtc_ops,
+		.trickle_charger_reg = RX8130_REG_CONTROL1,
+		.do_trickle_setup = &do_trickle_setup_rx8130,
 	},
 	[m41t0] = {
 		.rtc_ops	= &m41txx_rtc_ops,
-- 
2.28.0




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux