Add a property to allow control of the autocalibration filter
capacitor.
Signed-off-by: Kevin P. Fleming <kevin+linux@xxxxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
To: linux-rtc@xxxxxxxxxxxxxxx
To: devicetree@xxxxxxxxxxxxxxx
---
v3: corrected whitespace
Documentation/devicetree/bindings/rtc/abracon,abx80x.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
index 2405e35a1bc0f..1b606e33d1a83 100644
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -29,3 +29,11 @@ and valid to enable charging:
- "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
resistor, the other values are in kOhm.
+
+All of the devices can have a 47pf capacitor attached to increase the
+autocalibration accuracy of their RC oscillators. To enable or disable usage
+of the capacitor the following property can be defined:
+
+ - "abracon,autocal-filter": should be <0> or <1>. 0 indicates that there
+ is no capacitor attached, 1 indicates that there
+ is a capacitor attached.
--
2.26.2
