On 23/10/2019 17:01:59+0200, Arnd Bergmann wrote: > The old drivers/char/rtc.c driver was originally the implementation > for x86 PCs but got subsequently replaced by the rtc class driver > on all architectures except alpha. > > Move alpha over to the portable driver and remove the old one > for good. > > The CONFIG_JS_RTC option was only ever used on SPARC32 but > has not been available for many years, this was used to build > the same rtc driver with a different module name. > > Cc: Richard Henderson <rth@xxxxxxxxxxx> > Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx> > Cc: Matt Turner <mattst88@xxxxxxxxx> > Cc: linux-alpha@xxxxxxxxxxxxxxx > Cc: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx> > Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> > --- > This was last discussed in early 2018 in > https://lore.kernel.org/lkml/CAK8P3a0QZNY+K+V1HG056xCerz=_L2jh5UfZ+2LWkDqkw5Zznw@xxxxxxxxxxxxxx/ > > Nobody ever replied there, so let's try this instead. > If there is any reason to keep the driver after all, > please let us know. > --- > arch/alpha/configs/defconfig | 3 +- > drivers/char/Kconfig | 56 -- > drivers/char/Makefile | 4 - > drivers/char/rtc.c | 1311 ---------------------------------- > 4 files changed, 2 insertions(+), 1372 deletions(-) > delete mode 100644 drivers/char/rtc.c > > diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig > index f4ec420d7f2d..e10c1be3c0d1 100644 > --- a/arch/alpha/configs/defconfig > +++ b/arch/alpha/configs/defconfig > @@ -53,7 +53,8 @@ CONFIG_NET_PCI=y > CONFIG_YELLOWFIN=y > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > -CONFIG_RTC=y > +CONFIG_RTC_CLASS=y > +CONFIG_RTC_DRV_CMOS=y > CONFIG_EXT2_FS=y > CONFIG_REISERFS_FS=m > CONFIG_ISO9660_FS=y > diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig > index dabbf3f519c6..c2ac4f257c82 100644 > --- a/drivers/char/Kconfig > +++ b/drivers/char/Kconfig > @@ -243,62 +243,6 @@ config NVRAM > To compile this driver as a module, choose M here: the > module will be called nvram. > > -# > -# These legacy RTC drivers just cause too many conflicts with the generic > -# RTC framework ... let's not even try to coexist any more. > -# > -if RTC_LIB=n > - > -config RTC > - tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" > - depends on ALPHA > - ---help--- > - If you say Y here and create a character special file /dev/rtc with > - major number 10 and minor number 135 using mknod ("man mknod"), you > - will get access to the real time clock (or hardware clock) built > - into your computer. > - > - Every PC has such a clock built in. It can be used to generate > - signals from as low as 1Hz up to 8192Hz, and can also be used > - as a 24 hour alarm. It reports status information via the file > - /proc/driver/rtc and its behaviour is set by various ioctls on > - /dev/rtc. > - > - If you run Linux on a multiprocessor machine and said Y to > - "Symmetric Multi Processing" above, you should say Y here to read > - and set the RTC in an SMP compatible fashion. > - > - If you think you have a use for such a device (such as periodic data > - sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst> > - for details. > - > - To compile this driver as a module, choose M here: the > - module will be called rtc. > - > -config JS_RTC > - tristate "Enhanced Real Time Clock Support" > - depends on SPARC32 && PCI > - ---help--- > - If you say Y here and create a character special file /dev/rtc with > - major number 10 and minor number 135 using mknod ("man mknod"), you > - will get access to the real time clock (or hardware clock) built > - into your computer. > - > - Every PC has such a clock built in. It can be used to generate > - signals from as low as 1Hz up to 8192Hz, and can also be used > - as a 24 hour alarm. It reports status information via the file > - /proc/driver/rtc and its behaviour is set by various ioctls on > - /dev/rtc. > - > - If you think you have a use for such a device (such as periodic data > - sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst> > - for details. > - > - To compile this driver as a module, choose M here: the > - module will be called js-rtc. > - > -endif # RTC_LIB > - > config DTLK > tristate "Double Talk PC internal speech card support" > depends on ISA > diff --git a/drivers/char/Makefile b/drivers/char/Makefile > index abe3138b1f5a..ffce287ef415 100644 > --- a/drivers/char/Makefile > +++ b/drivers/char/Makefile > @@ -20,7 +20,6 @@ obj-$(CONFIG_APM_EMULATION) += apm-emulation.o > obj-$(CONFIG_DTLK) += dtlk.o > obj-$(CONFIG_APPLICOM) += applicom.o > obj-$(CONFIG_SONYPI) += sonypi.o > -obj-$(CONFIG_RTC) += rtc.o > obj-$(CONFIG_HPET) += hpet.o > obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ > obj-$(CONFIG_NVRAM) += nvram.o > @@ -45,9 +44,6 @@ obj-$(CONFIG_TCG_TPM) += tpm/ > > obj-$(CONFIG_PS3_FLASH) += ps3flash.o > > -obj-$(CONFIG_JS_RTC) += js-rtc.o > -js-rtc-y = rtc.o > - > obj-$(CONFIG_XILLYBUS) += xillybus/ > obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o > obj-$(CONFIG_ADI) += adi.o > diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c > deleted file mode 100644 > index 3b91184b77ae..000000000000 > --- a/drivers/char/rtc.c > +++ /dev/null > @@ -1,1311 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * Real Time Clock interface for Linux > - * > - * Copyright (C) 1996 Paul Gortmaker > - * > - * This driver allows use of the real time clock (built into > - * nearly all computers) from user space. It exports the /dev/rtc > - * interface supporting various ioctl() and also the > - * /proc/driver/rtc pseudo-file for status information. > - * > - * The ioctls can be used to set the interrupt behaviour and > - * generation rate from the RTC via IRQ 8. Then the /dev/rtc > - * interface can be used to make use of these timer interrupts, > - * be they interval or alarm based. > - * > - * The /dev/rtc interface will block on reads until an interrupt > - * has been received. If a RTC interrupt has already happened, > - * it will output an unsigned long and then block. The output value > - * contains the interrupt status in the low byte and the number of > - * interrupts since the last read in the remaining high bytes. The > - * /dev/rtc interface can also be used with the select(2) call. > - * > - * Based on other minimal char device drivers, like Alan's > - * watchdog, Ted's random, etc. etc. > - * > - * 1.07 Paul Gortmaker. > - * 1.08 Miquel van Smoorenburg: disallow certain things on the > - * DEC Alpha as the CMOS clock is also used for other things. > - * 1.09 Nikita Schmidt: epoch support and some Alpha cleanup. > - * 1.09a Pete Zaitcev: Sun SPARC > - * 1.09b Jeff Garzik: Modularize, init cleanup > - * 1.09c Jeff Garzik: SMP cleanup > - * 1.10 Paul Barton-Davis: add support for async I/O > - * 1.10a Andrea Arcangeli: Alpha updates > - * 1.10b Andrew Morton: SMP lock fix > - * 1.10c Cesar Barros: SMP locking fixes and cleanup > - * 1.10d Paul Gortmaker: delete paranoia check in rtc_exit > - * 1.10e Maciej W. Rozycki: Handle DECstation's year weirdness. > - * 1.11 Takashi Iwai: Kernel access functions > - * rtc_register/rtc_unregister/rtc_control > - * 1.11a Daniele Bellucci: Audit create_proc_read_entry in rtc_init > - * 1.12 Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer > - * CONFIG_HPET_EMULATE_RTC > - * 1.12a Maciej W. Rozycki: Handle memory-mapped chips properly. > - * 1.12ac Alan Cox: Allow read access to the day of week register > - * 1.12b David John: Remove calls to the BKL. > - */ > - > -#define RTC_VERSION "1.12b" > - > -/* > - * Note that *all* calls to CMOS_READ and CMOS_WRITE are done with > - * interrupts disabled. Due to the index-port/data-port (0x70/0x71) > - * design of the RTC, we don't want two different things trying to > - * get to it at once. (e.g. the periodic 11 min sync from > - * kernel/time/ntp.c vs. this driver.) > - */ > - > -#include <linux/interrupt.h> > -#include <linux/module.h> > -#include <linux/kernel.h> > -#include <linux/types.h> > -#include <linux/miscdevice.h> > -#include <linux/ioport.h> > -#include <linux/fcntl.h> > -#include <linux/mc146818rtc.h> > -#include <linux/init.h> > -#include <linux/poll.h> > -#include <linux/proc_fs.h> > -#include <linux/seq_file.h> > -#include <linux/spinlock.h> > -#include <linux/sched/signal.h> > -#include <linux/sysctl.h> > -#include <linux/wait.h> > -#include <linux/bcd.h> > -#include <linux/delay.h> > -#include <linux/uaccess.h> > -#include <linux/ratelimit.h> > - > -#include <asm/current.h> > - > -#ifdef CONFIG_X86 > -#include <asm/hpet.h> > -#endif > - > -#ifdef CONFIG_SPARC32 > -#include <linux/of.h> > -#include <linux/of_device.h> > -#include <asm/io.h> > - > -static unsigned long rtc_port; > -static int rtc_irq; > -#endif > - > -#ifdef CONFIG_HPET_EMULATE_RTC > -#undef RTC_IRQ > -#endif > - > -#ifdef RTC_IRQ > -static int rtc_has_irq = 1; > -#endif > - > -#ifndef CONFIG_HPET_EMULATE_RTC > -#define is_hpet_enabled() 0 > -#define hpet_set_alarm_time(hrs, min, sec) 0 > -#define hpet_set_periodic_freq(arg) 0 > -#define hpet_mask_rtc_irq_bit(arg) 0 > -#define hpet_set_rtc_irq_bit(arg) 0 > -#define hpet_rtc_timer_init() do { } while (0) > -#define hpet_rtc_dropped_irq() 0 > -#define hpet_register_irq_handler(h) ({ 0; }) > -#define hpet_unregister_irq_handler(h) ({ 0; }) > -#ifdef RTC_IRQ > -static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) > -{ > - return 0; > -} > -#endif > -#endif > - > -/* > - * We sponge a minor off of the misc major. No need slurping > - * up another valuable major dev number for this. If you add > - * an ioctl, make sure you don't conflict with SPARC's RTC > - * ioctls. > - */ > - > -static struct fasync_struct *rtc_async_queue; > - > -static DECLARE_WAIT_QUEUE_HEAD(rtc_wait); > - > -#ifdef RTC_IRQ > -static void rtc_dropped_irq(struct timer_list *unused); > - > -static DEFINE_TIMER(rtc_irq_timer, rtc_dropped_irq); > -#endif > - > -static ssize_t rtc_read(struct file *file, char __user *buf, > - size_t count, loff_t *ppos); > - > -static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg); > -static void rtc_get_rtc_time(struct rtc_time *rtc_tm); > - > -#ifdef RTC_IRQ > -static __poll_t rtc_poll(struct file *file, poll_table *wait); > -#endif > - > -static void get_rtc_alm_time(struct rtc_time *alm_tm); > -#ifdef RTC_IRQ > -static void set_rtc_irq_bit_locked(unsigned char bit); > -static void mask_rtc_irq_bit_locked(unsigned char bit); > - > -static inline void set_rtc_irq_bit(unsigned char bit) > -{ > - spin_lock_irq(&rtc_lock); > - set_rtc_irq_bit_locked(bit); > - spin_unlock_irq(&rtc_lock); > -} > - > -static void mask_rtc_irq_bit(unsigned char bit) > -{ > - spin_lock_irq(&rtc_lock); > - mask_rtc_irq_bit_locked(bit); > - spin_unlock_irq(&rtc_lock); > -} > -#endif > - > -#ifdef CONFIG_PROC_FS > -static int rtc_proc_show(struct seq_file *seq, void *v); > -#endif > - > -/* > - * Bits in rtc_status. (6 bits of room for future expansion) > - */ > - > -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ > -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ > - > -/* > - * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is > - * protected by the spin lock rtc_lock. However, ioctl can still disable the > - * timer in rtc_status and then with del_timer after the interrupt has read > - * rtc_status but before mod_timer is called, which would then reenable the > - * timer (but you would need to have an awful timing before you'd trip on it) > - */ > -static unsigned long rtc_status; /* bitmapped status byte. */ > -static unsigned long rtc_freq; /* Current periodic IRQ rate */ > -static unsigned long rtc_irq_data; /* our output to the world */ > -static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */ > - > -/* > - * If this driver ever becomes modularised, it will be really nice > - * to make the epoch retain its value across module reload... > - */ > - > -static unsigned long epoch = 1900; /* year corresponding to 0x00 */ > - > -static const unsigned char days_in_mo[] = > -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; > - > -/* > - * Returns true if a clock update is in progress > - */ > -static inline unsigned char rtc_is_updating(void) > -{ > - unsigned long flags; > - unsigned char uip; > - > - spin_lock_irqsave(&rtc_lock, flags); > - uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); > - spin_unlock_irqrestore(&rtc_lock, flags); > - return uip; > -} > - > -#ifdef RTC_IRQ > -/* > - * A very tiny interrupt handler. It runs with interrupts disabled, > - * but there is possibility of conflicting with the set_rtc_mmss() > - * call (the rtc irq and the timer irq can easily run at the same > - * time in two different CPUs). So we need to serialize > - * accesses to the chip with the rtc_lock spinlock that each > - * architecture should implement in the timer code. > - * (See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.) > - */ > - > -static irqreturn_t rtc_interrupt(int irq, void *dev_id) > -{ > - /* > - * Can be an alarm interrupt, update complete interrupt, > - * or a periodic interrupt. We store the status in the > - * low byte and the number of interrupts received since > - * the last read in the remainder of rtc_irq_data. > - */ > - > - spin_lock(&rtc_lock); > - rtc_irq_data += 0x100; > - rtc_irq_data &= ~0xff; > - if (is_hpet_enabled()) { > - /* > - * In this case it is HPET RTC interrupt handler > - * calling us, with the interrupt information > - * passed as arg1, instead of irq. > - */ > - rtc_irq_data |= (unsigned long)irq & 0xF0; > - } else { > - rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); > - } > - > - if (rtc_status & RTC_TIMER_ON) > - mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100); > - > - spin_unlock(&rtc_lock); > - > - wake_up_interruptible(&rtc_wait); > - > - kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); > - > - return IRQ_HANDLED; > -} > -#endif > - > -/* > - * sysctl-tuning infrastructure. > - */ > -static struct ctl_table rtc_table[] = { > - { > - .procname = "max-user-freq", > - .data = &rtc_max_user_freq, > - .maxlen = sizeof(int), > - .mode = 0644, > - .proc_handler = proc_dointvec, > - }, > - { } > -}; > - > -static struct ctl_table rtc_root[] = { > - { > - .procname = "rtc", > - .mode = 0555, > - .child = rtc_table, > - }, > - { } > -}; > - > -static struct ctl_table dev_root[] = { > - { > - .procname = "dev", > - .mode = 0555, > - .child = rtc_root, > - }, > - { } > -}; > - > -static struct ctl_table_header *sysctl_header; > - > -static int __init init_sysctl(void) > -{ > - sysctl_header = register_sysctl_table(dev_root); > - return 0; > -} > - > -static void __exit cleanup_sysctl(void) > -{ > - unregister_sysctl_table(sysctl_header); > -} > - > -/* > - * Now all the various file operations that we export. > - */ > - > -static ssize_t rtc_read(struct file *file, char __user *buf, > - size_t count, loff_t *ppos) > -{ > -#ifndef RTC_IRQ > - return -EIO; > -#else > - DECLARE_WAITQUEUE(wait, current); > - unsigned long data; > - ssize_t retval; > - > - if (rtc_has_irq == 0) > - return -EIO; > - > - /* > - * Historically this function used to assume that sizeof(unsigned long) > - * is the same in userspace and kernelspace. This lead to problems > - * for configurations with multiple ABIs such a the MIPS o32 and 64 > - * ABIs supported on the same kernel. So now we support read of both > - * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the > - * userspace ABI. > - */ > - if (count != sizeof(unsigned int) && count != sizeof(unsigned long)) > - return -EINVAL; > - > - add_wait_queue(&rtc_wait, &wait); > - > - do { > - /* First make it right. Then make it fast. Putting this whole > - * block within the parentheses of a while would be too > - * confusing. And no, xchg() is not the answer. */ > - > - __set_current_state(TASK_INTERRUPTIBLE); > - > - spin_lock_irq(&rtc_lock); > - data = rtc_irq_data; > - rtc_irq_data = 0; > - spin_unlock_irq(&rtc_lock); > - > - if (data != 0) > - break; > - > - if (file->f_flags & O_NONBLOCK) { > - retval = -EAGAIN; > - goto out; > - } > - if (signal_pending(current)) { > - retval = -ERESTARTSYS; > - goto out; > - } > - schedule(); > - } while (1); > - > - if (count == sizeof(unsigned int)) { > - retval = put_user(data, > - (unsigned int __user *)buf) ?: sizeof(int); > - } else { > - retval = put_user(data, > - (unsigned long __user *)buf) ?: sizeof(long); > - } > - if (!retval) > - retval = count; > - out: > - __set_current_state(TASK_RUNNING); > - remove_wait_queue(&rtc_wait, &wait); > - > - return retval; > -#endif > -} > - > -static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) > -{ > - struct rtc_time wtime; > - > -#ifdef RTC_IRQ > - if (rtc_has_irq == 0) { > - switch (cmd) { > - case RTC_AIE_OFF: > - case RTC_AIE_ON: > - case RTC_PIE_OFF: > - case RTC_PIE_ON: > - case RTC_UIE_OFF: > - case RTC_UIE_ON: > - case RTC_IRQP_READ: > - case RTC_IRQP_SET: > - return -EINVAL; > - } > - } > -#endif > - > - switch (cmd) { > -#ifdef RTC_IRQ > - case RTC_AIE_OFF: /* Mask alarm int. enab. bit */ > - { > - mask_rtc_irq_bit(RTC_AIE); > - return 0; > - } > - case RTC_AIE_ON: /* Allow alarm interrupts. */ > - { > - set_rtc_irq_bit(RTC_AIE); > - return 0; > - } > - case RTC_PIE_OFF: /* Mask periodic int. enab. bit */ > - { > - /* can be called from isr via rtc_control() */ > - unsigned long flags; > - > - spin_lock_irqsave(&rtc_lock, flags); > - mask_rtc_irq_bit_locked(RTC_PIE); > - if (rtc_status & RTC_TIMER_ON) { > - rtc_status &= ~RTC_TIMER_ON; > - del_timer(&rtc_irq_timer); > - } > - spin_unlock_irqrestore(&rtc_lock, flags); > - > - return 0; > - } > - case RTC_PIE_ON: /* Allow periodic ints */ > - { > - /* can be called from isr via rtc_control() */ > - unsigned long flags; > - > - /* > - * We don't really want Joe User enabling more > - * than 64Hz of interrupts on a multi-user machine. > - */ > - if (!kernel && (rtc_freq > rtc_max_user_freq) && > - (!capable(CAP_SYS_RESOURCE))) > - return -EACCES; > - > - spin_lock_irqsave(&rtc_lock, flags); > - if (!(rtc_status & RTC_TIMER_ON)) { > - mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + > - 2*HZ/100); > - rtc_status |= RTC_TIMER_ON; > - } > - set_rtc_irq_bit_locked(RTC_PIE); > - spin_unlock_irqrestore(&rtc_lock, flags); > - > - return 0; > - } > - case RTC_UIE_OFF: /* Mask ints from RTC updates. */ > - { > - mask_rtc_irq_bit(RTC_UIE); > - return 0; > - } > - case RTC_UIE_ON: /* Allow ints for RTC updates. */ > - { > - set_rtc_irq_bit(RTC_UIE); > - return 0; > - } > -#endif > - case RTC_ALM_READ: /* Read the present alarm time */ > - { > - /* > - * This returns a struct rtc_time. Reading >= 0xc0 > - * means "don't care" or "match all". Only the tm_hour, > - * tm_min, and tm_sec values are filled in. > - */ > - memset(&wtime, 0, sizeof(struct rtc_time)); > - get_rtc_alm_time(&wtime); > - break; > - } > - case RTC_ALM_SET: /* Store a time into the alarm */ > - { > - /* > - * This expects a struct rtc_time. Writing 0xff means > - * "don't care" or "match all". Only the tm_hour, > - * tm_min and tm_sec are used. > - */ > - unsigned char hrs, min, sec; > - struct rtc_time alm_tm; > - > - if (copy_from_user(&alm_tm, (struct rtc_time __user *)arg, > - sizeof(struct rtc_time))) > - return -EFAULT; > - > - hrs = alm_tm.tm_hour; > - min = alm_tm.tm_min; > - sec = alm_tm.tm_sec; > - > - spin_lock_irq(&rtc_lock); > - if (hpet_set_alarm_time(hrs, min, sec)) { > - /* > - * Fallthru and set alarm time in CMOS too, > - * so that we will get proper value in RTC_ALM_READ > - */ > - } > - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || > - RTC_ALWAYS_BCD) { > - if (sec < 60) > - sec = bin2bcd(sec); > - else > - sec = 0xff; > - > - if (min < 60) > - min = bin2bcd(min); > - else > - min = 0xff; > - > - if (hrs < 24) > - hrs = bin2bcd(hrs); > - else > - hrs = 0xff; > - } > - CMOS_WRITE(hrs, RTC_HOURS_ALARM); > - CMOS_WRITE(min, RTC_MINUTES_ALARM); > - CMOS_WRITE(sec, RTC_SECONDS_ALARM); > - spin_unlock_irq(&rtc_lock); > - > - return 0; > - } > - case RTC_RD_TIME: /* Read the time/date from RTC */ > - { > - memset(&wtime, 0, sizeof(struct rtc_time)); > - rtc_get_rtc_time(&wtime); > - break; > - } > - case RTC_SET_TIME: /* Set the RTC */ > - { > - struct rtc_time rtc_tm; > - unsigned char mon, day, hrs, min, sec, leap_yr; > - unsigned char save_control, save_freq_select; > - unsigned int yrs; > -#ifdef CONFIG_MACH_DECSTATION > - unsigned int real_yrs; > -#endif > - > - if (!capable(CAP_SYS_TIME)) > - return -EACCES; > - > - if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg, > - sizeof(struct rtc_time))) > - return -EFAULT; > - > - yrs = rtc_tm.tm_year + 1900; > - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ > - day = rtc_tm.tm_mday; > - hrs = rtc_tm.tm_hour; > - min = rtc_tm.tm_min; > - sec = rtc_tm.tm_sec; > - > - if (yrs < 1970) > - return -EINVAL; > - > - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); > - > - if ((mon > 12) || (day == 0)) > - return -EINVAL; > - > - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) > - return -EINVAL; > - > - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) > - return -EINVAL; > - > - yrs -= epoch; > - if (yrs > 255) /* They are unsigned */ > - return -EINVAL; > - > - spin_lock_irq(&rtc_lock); > -#ifdef CONFIG_MACH_DECSTATION > - real_yrs = yrs; > - yrs = 72; > - > - /* > - * We want to keep the year set to 73 until March > - * for non-leap years, so that Feb, 29th is handled > - * correctly. > - */ > - if (!leap_yr && mon < 3) { > - real_yrs--; > - yrs = 73; > - } > -#endif > - /* These limits and adjustments are independent of > - * whether the chip is in binary mode or not. > - */ > - if (yrs > 169) { > - spin_unlock_irq(&rtc_lock); > - return -EINVAL; > - } > - if (yrs >= 100) > - yrs -= 100; > - > - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) > - || RTC_ALWAYS_BCD) { > - sec = bin2bcd(sec); > - min = bin2bcd(min); > - hrs = bin2bcd(hrs); > - day = bin2bcd(day); > - mon = bin2bcd(mon); > - yrs = bin2bcd(yrs); > - } > - > - save_control = CMOS_READ(RTC_CONTROL); > - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); > - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); > - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); > - > -#ifdef CONFIG_MACH_DECSTATION > - CMOS_WRITE(real_yrs, RTC_DEC_YEAR); > -#endif > - CMOS_WRITE(yrs, RTC_YEAR); > - CMOS_WRITE(mon, RTC_MONTH); > - CMOS_WRITE(day, RTC_DAY_OF_MONTH); > - CMOS_WRITE(hrs, RTC_HOURS); > - CMOS_WRITE(min, RTC_MINUTES); > - CMOS_WRITE(sec, RTC_SECONDS); > - > - CMOS_WRITE(save_control, RTC_CONTROL); > - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); > - > - spin_unlock_irq(&rtc_lock); > - return 0; > - } > -#ifdef RTC_IRQ > - case RTC_IRQP_READ: /* Read the periodic IRQ rate. */ > - { > - return put_user(rtc_freq, (unsigned long __user *)arg); > - } > - case RTC_IRQP_SET: /* Set periodic IRQ rate. */ > - { > - int tmp = 0; > - unsigned char val; > - /* can be called from isr via rtc_control() */ > - unsigned long flags; > - > - /* > - * The max we can do is 8192Hz. > - */ > - if ((arg < 2) || (arg > 8192)) > - return -EINVAL; > - /* > - * We don't really want Joe User generating more > - * than 64Hz of interrupts on a multi-user machine. > - */ > - if (!kernel && (arg > rtc_max_user_freq) && > - !capable(CAP_SYS_RESOURCE)) > - return -EACCES; > - > - while (arg > (1<<tmp)) > - tmp++; > - > - /* > - * Check that the input was really a power of 2. > - */ > - if (arg != (1<<tmp)) > - return -EINVAL; > - > - rtc_freq = arg; > - > - spin_lock_irqsave(&rtc_lock, flags); > - if (hpet_set_periodic_freq(arg)) { > - spin_unlock_irqrestore(&rtc_lock, flags); > - return 0; > - } > - > - val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0; > - val |= (16 - tmp); > - CMOS_WRITE(val, RTC_FREQ_SELECT); > - spin_unlock_irqrestore(&rtc_lock, flags); > - return 0; > - } > -#endif > - case RTC_EPOCH_READ: /* Read the epoch. */ > - { > - return put_user(epoch, (unsigned long __user *)arg); > - } > - case RTC_EPOCH_SET: /* Set the epoch. */ > - { > - /* > - * There were no RTC clocks before 1900. > - */ > - if (arg < 1900) > - return -EINVAL; > - > - if (!capable(CAP_SYS_TIME)) > - return -EACCES; > - > - epoch = arg; > - return 0; > - } > - default: > - return -ENOTTY; > - } > - return copy_to_user((void __user *)arg, > - &wtime, sizeof wtime) ? -EFAULT : 0; > -} > - > -static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) > -{ > - long ret; > - ret = rtc_do_ioctl(cmd, arg, 0); > - return ret; > -} > - > -/* > - * We enforce only one user at a time here with the open/close. > - * Also clear the previous interrupt data on an open, and clean > - * up things on a close. > - */ > -static int rtc_open(struct inode *inode, struct file *file) > -{ > - spin_lock_irq(&rtc_lock); > - > - if (rtc_status & RTC_IS_OPEN) > - goto out_busy; > - > - rtc_status |= RTC_IS_OPEN; > - > - rtc_irq_data = 0; > - spin_unlock_irq(&rtc_lock); > - return 0; > - > -out_busy: > - spin_unlock_irq(&rtc_lock); > - return -EBUSY; > -} > - > -static int rtc_fasync(int fd, struct file *filp, int on) > -{ > - return fasync_helper(fd, filp, on, &rtc_async_queue); > -} > - > -static int rtc_release(struct inode *inode, struct file *file) > -{ > -#ifdef RTC_IRQ > - unsigned char tmp; > - > - if (rtc_has_irq == 0) > - goto no_irq; > - > - /* > - * Turn off all interrupts once the device is no longer > - * in use, and clear the data. > - */ > - > - spin_lock_irq(&rtc_lock); > - if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) { > - tmp = CMOS_READ(RTC_CONTROL); > - tmp &= ~RTC_PIE; > - tmp &= ~RTC_AIE; > - tmp &= ~RTC_UIE; > - CMOS_WRITE(tmp, RTC_CONTROL); > - CMOS_READ(RTC_INTR_FLAGS); > - } > - if (rtc_status & RTC_TIMER_ON) { > - rtc_status &= ~RTC_TIMER_ON; > - del_timer(&rtc_irq_timer); > - } > - spin_unlock_irq(&rtc_lock); > - > -no_irq: > -#endif > - > - spin_lock_irq(&rtc_lock); > - rtc_irq_data = 0; > - rtc_status &= ~RTC_IS_OPEN; > - spin_unlock_irq(&rtc_lock); > - > - return 0; > -} > - > -#ifdef RTC_IRQ > -static __poll_t rtc_poll(struct file *file, poll_table *wait) > -{ > - unsigned long l; > - > - if (rtc_has_irq == 0) > - return 0; > - > - poll_wait(file, &rtc_wait, wait); > - > - spin_lock_irq(&rtc_lock); > - l = rtc_irq_data; > - spin_unlock_irq(&rtc_lock); > - > - if (l != 0) > - return EPOLLIN | EPOLLRDNORM; > - return 0; > -} > -#endif > - > -/* > - * The various file operations we support. > - */ > - > -static const struct file_operations rtc_fops = { > - .owner = THIS_MODULE, > - .llseek = no_llseek, > - .read = rtc_read, > -#ifdef RTC_IRQ > - .poll = rtc_poll, > -#endif > - .unlocked_ioctl = rtc_ioctl, > - .open = rtc_open, > - .release = rtc_release, > - .fasync = rtc_fasync, > -}; > - > -static struct miscdevice rtc_dev = { > - .minor = RTC_MINOR, > - .name = "rtc", > - .fops = &rtc_fops, > -}; > - > -static resource_size_t rtc_size; > - > -static struct resource * __init rtc_request_region(resource_size_t size) > -{ > - struct resource *r; > - > - if (RTC_IOMAPPED) > - r = request_region(RTC_PORT(0), size, "rtc"); > - else > - r = request_mem_region(RTC_PORT(0), size, "rtc"); > - > - if (r) > - rtc_size = size; > - > - return r; > -} > - > -static void rtc_release_region(void) > -{ > - if (RTC_IOMAPPED) > - release_region(RTC_PORT(0), rtc_size); > - else > - release_mem_region(RTC_PORT(0), rtc_size); > -} > - > -static int __init rtc_init(void) > -{ > -#ifdef CONFIG_PROC_FS > - struct proc_dir_entry *ent; > -#endif > -#if defined(__alpha__) || defined(__mips__) > - unsigned int year, ctrl; > - char *guess = NULL; > -#endif > -#ifdef CONFIG_SPARC32 > - struct device_node *ebus_dp; > - struct platform_device *op; > -#else > - void *r; > -#ifdef RTC_IRQ > - irq_handler_t rtc_int_handler_ptr; > -#endif > -#endif > - > -#ifdef CONFIG_SPARC32 > - for_each_node_by_name(ebus_dp, "ebus") { > - struct device_node *dp; > - for_each_child_of_node(ebus_dp, dp) { > - if (of_node_name_eq(dp, "rtc")) { > - op = of_find_device_by_node(dp); > - if (op) { > - rtc_port = op->resource[0].start; > - rtc_irq = op->irqs[0]; > - goto found; > - } > - } > - } > - } > - rtc_has_irq = 0; > - printk(KERN_ERR "rtc_init: no PC rtc found\n"); > - return -EIO; > - > -found: > - if (!rtc_irq) { > - rtc_has_irq = 0; > - goto no_irq; > - } > - > - /* > - * XXX Interrupt pin #7 in Espresso is shared between RTC and > - * PCI Slot 2 INTA# (and some INTx# in Slot 1). > - */ > - if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", > - (void *)&rtc_port)) { > - rtc_has_irq = 0; > - printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq); > - return -EIO; > - } > -no_irq: > -#else > - r = rtc_request_region(RTC_IO_EXTENT); > - > - /* > - * If we've already requested a smaller range (for example, because > - * PNPBIOS or ACPI told us how the device is configured), the request > - * above might fail because it's too big. > - * > - * If so, request just the range we actually use. > - */ > - if (!r) > - r = rtc_request_region(RTC_IO_EXTENT_USED); > - if (!r) { > -#ifdef RTC_IRQ > - rtc_has_irq = 0; > -#endif > - printk(KERN_ERR "rtc: I/O resource %lx is not free.\n", > - (long)(RTC_PORT(0))); > - return -EIO; > - } > - > -#ifdef RTC_IRQ > - if (is_hpet_enabled()) { > - int err; > - > - rtc_int_handler_ptr = hpet_rtc_interrupt; > - err = hpet_register_irq_handler(rtc_interrupt); > - if (err != 0) { > - printk(KERN_WARNING "hpet_register_irq_handler failed " > - "in rtc_init()."); > - return err; > - } > - } else { > - rtc_int_handler_ptr = rtc_interrupt; > - } > - > - if (request_irq(RTC_IRQ, rtc_int_handler_ptr, 0, "rtc", NULL)) { > - /* Yeah right, seeing as irq 8 doesn't even hit the bus. */ > - rtc_has_irq = 0; > - printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ); > - rtc_release_region(); > - > - return -EIO; > - } > - hpet_rtc_timer_init(); > - > -#endif > - > -#endif /* CONFIG_SPARC32 vs. others */ > - > - if (misc_register(&rtc_dev)) { > -#ifdef RTC_IRQ > - free_irq(RTC_IRQ, NULL); > - hpet_unregister_irq_handler(rtc_interrupt); > - rtc_has_irq = 0; > -#endif > - rtc_release_region(); > - return -ENODEV; > - } > - > -#ifdef CONFIG_PROC_FS > - ent = proc_create_single("driver/rtc", 0, NULL, rtc_proc_show); > - if (!ent) > - printk(KERN_WARNING "rtc: Failed to register with procfs.\n"); > -#endif > - > -#if defined(__alpha__) || defined(__mips__) > - rtc_freq = HZ; > - > - /* Each operating system on an Alpha uses its own epoch. > - Let's try to guess which one we are using now. */ > - > - if (rtc_is_updating() != 0) > - msleep(20); > - > - spin_lock_irq(&rtc_lock); > - year = CMOS_READ(RTC_YEAR); > - ctrl = CMOS_READ(RTC_CONTROL); > - spin_unlock_irq(&rtc_lock); > - > - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) > - year = bcd2bin(year); /* This should never happen... */ > - > - if (year < 20) { > - epoch = 2000; > - guess = "SRM (post-2000)"; > - } else if (year >= 20 && year < 48) { > - epoch = 1980; > - guess = "ARC console"; > - } else if (year >= 48 && year < 72) { > - epoch = 1952; > - guess = "Digital UNIX"; > -#if defined(__mips__) > - } else if (year >= 72 && year < 74) { > - epoch = 2000; > - guess = "Digital DECstation"; > -#else > - } else if (year >= 70) { > - epoch = 1900; > - guess = "Standard PC (1900)"; > -#endif > - } > - if (guess) > - printk(KERN_INFO "rtc: %s epoch (%lu) detected\n", > - guess, epoch); > -#endif > -#ifdef RTC_IRQ > - if (rtc_has_irq == 0) > - goto no_irq2; > - > - spin_lock_irq(&rtc_lock); > - rtc_freq = 1024; > - if (!hpet_set_periodic_freq(rtc_freq)) { > - /* > - * Initialize periodic frequency to CMOS reset default, > - * which is 1024Hz > - */ > - CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), > - RTC_FREQ_SELECT); > - } > - spin_unlock_irq(&rtc_lock); > -no_irq2: > -#endif > - > - (void) init_sysctl(); > - > - printk(KERN_INFO "Real Time Clock Driver v" RTC_VERSION "\n"); > - > - return 0; > -} > - > -static void __exit rtc_exit(void) > -{ > - cleanup_sysctl(); > - remove_proc_entry("driver/rtc", NULL); > - misc_deregister(&rtc_dev); > - > -#ifdef CONFIG_SPARC32 > - if (rtc_has_irq) > - free_irq(rtc_irq, &rtc_port); > -#else > - rtc_release_region(); > -#ifdef RTC_IRQ > - if (rtc_has_irq) { > - free_irq(RTC_IRQ, NULL); > - hpet_unregister_irq_handler(hpet_rtc_interrupt); > - } > -#endif > -#endif /* CONFIG_SPARC32 */ > -} > - > -module_init(rtc_init); > -module_exit(rtc_exit); > - > -#ifdef RTC_IRQ > -/* > - * At IRQ rates >= 4096Hz, an interrupt may get lost altogether. > - * (usually during an IDE disk interrupt, with IRQ unmasking off) > - * Since the interrupt handler doesn't get called, the IRQ status > - * byte doesn't get read, and the RTC stops generating interrupts. > - * A timer is set, and will call this function if/when that happens. > - * To get it out of this stalled state, we just read the status. > - * At least a jiffy of interrupts (rtc_freq/HZ) will have been lost. > - * (You *really* shouldn't be trying to use a non-realtime system > - * for something that requires a steady > 1KHz signal anyways.) > - */ > - > -static void rtc_dropped_irq(struct timer_list *unused) > -{ > - unsigned long freq; > - > - spin_lock_irq(&rtc_lock); > - > - if (hpet_rtc_dropped_irq()) { > - spin_unlock_irq(&rtc_lock); > - return; > - } > - > - /* Just in case someone disabled the timer from behind our back... */ > - if (rtc_status & RTC_TIMER_ON) > - mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100); > - > - rtc_irq_data += ((rtc_freq/HZ)<<8); > - rtc_irq_data &= ~0xff; > - rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); /* restart */ > - > - freq = rtc_freq; > - > - spin_unlock_irq(&rtc_lock); > - > - printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", > - freq); > - > - /* Now we have new data */ > - wake_up_interruptible(&rtc_wait); > - > - kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); > -} > -#endif > - > -#ifdef CONFIG_PROC_FS > -/* > - * Info exported via "/proc/driver/rtc". > - */ > - > -static int rtc_proc_show(struct seq_file *seq, void *v) > -{ > -#define YN(bit) ((ctrl & bit) ? "yes" : "no") > -#define NY(bit) ((ctrl & bit) ? "no" : "yes") > - struct rtc_time tm; > - unsigned char batt, ctrl; > - unsigned long freq; > - > - spin_lock_irq(&rtc_lock); > - batt = CMOS_READ(RTC_VALID) & RTC_VRT; > - ctrl = CMOS_READ(RTC_CONTROL); > - freq = rtc_freq; > - spin_unlock_irq(&rtc_lock); > - > - > - rtc_get_rtc_time(&tm); > - > - /* > - * There is no way to tell if the luser has the RTC set for local > - * time or for Universal Standard Time (GMT). Probably local though. > - */ > - seq_printf(seq, > - "rtc_time\t: %ptRt\n" > - "rtc_date\t: %ptRd\n" > - "rtc_epoch\t: %04lu\n", > - &tm, &tm, epoch); > - > - get_rtc_alm_time(&tm); > - > - /* > - * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will > - * match any value for that particular field. Values that are > - * greater than a valid time, but less than 0xc0 shouldn't appear. > - */ > - seq_puts(seq, "alarm\t\t: "); > - if (tm.tm_hour <= 24) > - seq_printf(seq, "%02d:", tm.tm_hour); > - else > - seq_puts(seq, "**:"); > - > - if (tm.tm_min <= 59) > - seq_printf(seq, "%02d:", tm.tm_min); > - else > - seq_puts(seq, "**:"); > - > - if (tm.tm_sec <= 59) > - seq_printf(seq, "%02d\n", tm.tm_sec); > - else > - seq_puts(seq, "**\n"); > - > - seq_printf(seq, > - "DST_enable\t: %s\n" > - "BCD\t\t: %s\n" > - "24hr\t\t: %s\n" > - "square_wave\t: %s\n" > - "alarm_IRQ\t: %s\n" > - "update_IRQ\t: %s\n" > - "periodic_IRQ\t: %s\n" > - "periodic_freq\t: %ld\n" > - "batt_status\t: %s\n", > - YN(RTC_DST_EN), > - NY(RTC_DM_BINARY), > - YN(RTC_24H), > - YN(RTC_SQWE), > - YN(RTC_AIE), > - YN(RTC_UIE), > - YN(RTC_PIE), > - freq, > - batt ? "okay" : "dead"); > - > - return 0; > -#undef YN > -#undef NY > -} > -#endif > - > -static void rtc_get_rtc_time(struct rtc_time *rtc_tm) > -{ > - unsigned long uip_watchdog = jiffies, flags; > - unsigned char ctrl; > -#ifdef CONFIG_MACH_DECSTATION > - unsigned int real_year; > -#endif > - > - /* > - * read RTC once any update in progress is done. The update > - * can take just over 2ms. We wait 20ms. There is no need to > - * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. > - * If you need to know *exactly* when a second has started, enable > - * periodic update complete interrupts, (via ioctl) and then > - * immediately read /dev/rtc which will block until you get the IRQ. > - * Once the read clears, read the RTC time (again via ioctl). Easy. > - */ > - > - while (rtc_is_updating() != 0 && > - time_before(jiffies, uip_watchdog + 2*HZ/100)) > - cpu_relax(); > - > - /* > - * Only the values that we read from the RTC are set. We leave > - * tm_wday, tm_yday and tm_isdst untouched. Note that while the > - * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is > - * only updated by the RTC when initially set to a non-zero value. > - */ > - spin_lock_irqsave(&rtc_lock, flags); > - rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS); > - rtc_tm->tm_min = CMOS_READ(RTC_MINUTES); > - rtc_tm->tm_hour = CMOS_READ(RTC_HOURS); > - rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH); > - rtc_tm->tm_mon = CMOS_READ(RTC_MONTH); > - rtc_tm->tm_year = CMOS_READ(RTC_YEAR); > - /* Only set from 2.6.16 onwards */ > - rtc_tm->tm_wday = CMOS_READ(RTC_DAY_OF_WEEK); > - > -#ifdef CONFIG_MACH_DECSTATION > - real_year = CMOS_READ(RTC_DEC_YEAR); > -#endif > - ctrl = CMOS_READ(RTC_CONTROL); > - spin_unlock_irqrestore(&rtc_lock, flags); > - > - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { > - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); > - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); > - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); > - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); > - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); > - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); > - rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday); > - } > - > -#ifdef CONFIG_MACH_DECSTATION > - rtc_tm->tm_year += real_year - 72; > -#endif > - > - /* > - * Account for differences between how the RTC uses the values > - * and how they are defined in a struct rtc_time; > - */ > - rtc_tm->tm_year += epoch - 1900; > - if (rtc_tm->tm_year <= 69) > - rtc_tm->tm_year += 100; > - > - rtc_tm->tm_mon--; > -} > - > -static void get_rtc_alm_time(struct rtc_time *alm_tm) > -{ > - unsigned char ctrl; > - > - /* > - * Only the values that we read from the RTC are set. That > - * means only tm_hour, tm_min, and tm_sec. > - */ > - spin_lock_irq(&rtc_lock); > - alm_tm->tm_sec = CMOS_READ(RTC_SECONDS_ALARM); > - alm_tm->tm_min = CMOS_READ(RTC_MINUTES_ALARM); > - alm_tm->tm_hour = CMOS_READ(RTC_HOURS_ALARM); > - ctrl = CMOS_READ(RTC_CONTROL); > - spin_unlock_irq(&rtc_lock); > - > - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { > - alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec); > - alm_tm->tm_min = bcd2bin(alm_tm->tm_min); > - alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); > - } > -} > - > -#ifdef RTC_IRQ > -/* > - * Used to disable/enable interrupts for any one of UIE, AIE, PIE. > - * Rumour has it that if you frob the interrupt enable/disable > - * bits in RTC_CONTROL, you should read RTC_INTR_FLAGS, to > - * ensure you actually start getting interrupts. Probably for > - * compatibility with older/broken chipset RTC implementations. > - * We also clear out any old irq data after an ioctl() that > - * meddles with the interrupt enable/disable bits. > - */ > - > -static void mask_rtc_irq_bit_locked(unsigned char bit) > -{ > - unsigned char val; > - > - if (hpet_mask_rtc_irq_bit(bit)) > - return; > - val = CMOS_READ(RTC_CONTROL); > - val &= ~bit; > - CMOS_WRITE(val, RTC_CONTROL); > - CMOS_READ(RTC_INTR_FLAGS); > - > - rtc_irq_data = 0; > -} > - > -static void set_rtc_irq_bit_locked(unsigned char bit) > -{ > - unsigned char val; > - > - if (hpet_set_rtc_irq_bit(bit)) > - return; > - val = CMOS_READ(RTC_CONTROL); > - val |= bit; > - CMOS_WRITE(val, RTC_CONTROL); > - CMOS_READ(RTC_INTR_FLAGS); > - > - rtc_irq_data = 0; > -} > -#endif > - > -MODULE_AUTHOR("Paul Gortmaker"); > -MODULE_LICENSE("GPL"); > -MODULE_ALIAS_MISCDEV(RTC_MINOR); > -- > 2.20.0 > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
