Use rtc_lock and rtc_unlock to lock the rtc from the interrupt handler. This removes the need for a driver specific lock. Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> --- drivers/rtc/rtc-ds1343.c | 36 +++++++----------------------------- 1 file changed, 7 insertions(+), 29 deletions(-) diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c index c96a505972e6..867187325d41 100644 --- a/drivers/rtc/rtc-ds1343.c +++ b/drivers/rtc/rtc-ds1343.c @@ -78,7 +78,6 @@ struct ds1343_priv { struct spi_device *spi; struct rtc_device *rtc; struct regmap *map; - struct mutex mutex; unsigned int irqen; int irq; int alarm_sec; @@ -290,17 +289,15 @@ static int ds1343_update_alarm(struct device *dev) static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) { struct ds1343_priv *priv = dev_get_drvdata(dev); - int res = 0; + int res; unsigned int stat; if (priv->irq <= 0) return -EINVAL; - mutex_lock(&priv->mutex); - res = regmap_read(priv->map, DS1343_STATUS_REG, &stat); if (res) - goto out; + return res; alarm->enabled = !!(priv->irqen & RTC_AF); alarm->pending = !!(stat & DS1343_IRQF0); @@ -310,21 +307,16 @@ static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) alarm->time.tm_hour = priv->alarm_hour < 0 ? 0 : priv->alarm_hour; alarm->time.tm_mday = priv->alarm_mday < 0 ? 0 : priv->alarm_mday; -out: - mutex_unlock(&priv->mutex); - return res; + return 0; } static int ds1343_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) { struct ds1343_priv *priv = dev_get_drvdata(dev); - int res = 0; if (priv->irq <= 0) return -EINVAL; - mutex_lock(&priv->mutex); - priv->alarm_sec = alarm->time.tm_sec; priv->alarm_min = alarm->time.tm_min; priv->alarm_hour = alarm->time.tm_hour; @@ -333,33 +325,22 @@ static int ds1343_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) if (alarm->enabled) priv->irqen |= RTC_AF; - res = ds1343_update_alarm(dev); - - mutex_unlock(&priv->mutex); - - return res; + return ds1343_update_alarm(dev); } static int ds1343_alarm_irq_enable(struct device *dev, unsigned int enabled) { struct ds1343_priv *priv = dev_get_drvdata(dev); - int res = 0; if (priv->irq <= 0) return -EINVAL; - mutex_lock(&priv->mutex); - if (enabled) priv->irqen |= RTC_AF; else priv->irqen &= ~RTC_AF; - res = ds1343_update_alarm(dev); - - mutex_unlock(&priv->mutex); - - return res; + return ds1343_update_alarm(dev); } static irqreturn_t ds1343_thread(int irq, void *dev_id) @@ -368,7 +349,7 @@ static irqreturn_t ds1343_thread(int irq, void *dev_id) unsigned int stat, control; int res = 0; - mutex_lock(&priv->mutex); + rtc_lock(priv->rtc); res = regmap_read(priv->map, DS1343_STATUS_REG, &stat); if (res) @@ -389,7 +370,7 @@ static irqreturn_t ds1343_thread(int irq, void *dev_id) } out: - mutex_unlock(&priv->mutex); + rtc_unlock(priv->rtc); return IRQ_HANDLED; } @@ -422,7 +403,6 @@ static int ds1343_probe(struct spi_device *spi) return -ENOMEM; priv->spi = spi; - mutex_init(&priv->mutex); /* RTC DS1347 works in spi mode 3 and * its chip select is active high @@ -500,9 +480,7 @@ static int ds1343_remove(struct spi_device *spi) struct ds1343_priv *priv = spi_get_drvdata(spi); if (spi->irq) { - mutex_lock(&priv->mutex); priv->irqen &= ~RTC_AF; - mutex_unlock(&priv->mutex); dev_pm_clear_wake_irq(&spi->dev); device_init_wakeup(&spi->dev, false); -- 2.21.0