On Thu, 19 Sep 2019 09:45:19 +0800, Biwen Li wrote: > Add some properties for pcf85263/pcf85363 as follows: > - nxp,rtc-interrupt-type: integer type > - nxp,rtc-interrupt-output-pin: string type > - quartz-load-femtofarads: integer type > - quartz-drive-strength-ohms: integer type > - nxp,quartz-low-jitter: bool type > - wakeup-source: bool type > > Signed-off-by: Martin Fuzzey <mfuzzey@xxxxxxxxxxx> > Signed-off-by: Biwen Li <biwen.li@xxxxxxx> > --- > Change in v5: > - Replace nxp,quartz-drive-strength with > quartz-drive-strength-ohms > - Select ohm unit for quartz drive strength > > Change in v4: > - Drop robust defines in include/dt-bindings/rtc/pcf85363.h > - Add nxp,rtc-interrupt-type property > - Replace interrupt-output-pin with nxp,rtc-interrupt-output-pin > > Change in v3: > - None > > Change in v2: > - Replace properties name > quartz-load-capacitance -> quartz-load-femtofarads > quartz-drive-strength -> nxp,quartz-drive-strength > quartz-low-jitter -> nxp,quartz-low-jitter > - Replace drive strength name > PCF85263_QUARTZDRIVE_NORMAL -> PCF85263_QUARTZDRIVE_100ko > PCF85263_QUARTZDRIVE_LOW -> PCF85263_QUARTZDRIVE_60ko > PCF85263_QUARTZDRIVE_HIGH -> PCF85263_QUARTZDRIVE_500ko > - Set default interrupt-output-pin as "INTA" > > .../devicetree/bindings/rtc/pcf85363.txt | 44 ++++++++++++++++++- > include/dt-bindings/rtc/pcf85363.h | 14 ++++++ > 2 files changed, 57 insertions(+), 1 deletion(-) > create mode 100644 include/dt-bindings/rtc/pcf85363.h > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
