On 13/08/2019 11:01:56+0800, Biwen Li wrote: > For the paltforms including LS1012A, LS1021A, LS1028A, LS1043A, > LS1046A, LS1088A, LS208xA that has the FlexTimer > module, implementing alarm functions within RTC subsystem > to wakeup the system when system going to sleep (work with RCPM driver). > > Signed-off-by: Biwen Li <biwen.li@xxxxxxx> > --- > Change in v7: > - None > > Change in v6: > - None > > Change in v5: > - replace devm_rtc_device_register with devm_rtc_allocate_device > and rtc_register_device > > Change in v4: > - clean code > - correct requesting irq > - register as a regular RTC driver > - change return value of ftm_rtc_set_alarm from -EINVAL to -ERANGE > - replace pr_err with dev_err > - sort alphabetically > - auto select RCPM driver > - correct UTC time in ftm_rtc_read_time > > Change in v3: > - add some comments about clock source and errata > - adjust format > - replace endian with big_endian of struct ftm_rtc > - remove compatible "fsl,ftm-alarm" > > Change in v2: > - remove code about setting rcpm > > drivers/rtc/Kconfig | 15 ++ > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-fsl-ftm-alarm.c | 336 ++++++++++++++++++++++++++++++++ > 3 files changed, 352 insertions(+) > create mode 100644 drivers/rtc/rtc-fsl-ftm-alarm.c > Applied, thanks. -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
