[PATCH v14 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ROHM BD70528MWV is an ultra-low quiescent current general
purpose single-chip power management IC for battery-powered
portable devices.

Add MFD core which enables chip access for following subdevices:
	- regulators/LED drivers
	- battery-charger
	- gpios
	- 32.768kHz clk
	- RTC
	- watchdog

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
Changelog v14: No changes

 drivers/mfd/Kconfig              |  17 ++
 drivers/mfd/Makefile             |   1 +
 drivers/mfd/rohm-bd70528.c       | 316 ++++++++++++++++++++++++
 include/linux/mfd/rohm-bd70528.h | 408 +++++++++++++++++++++++++++++++
 4 files changed, 742 insertions(+)
 create mode 100644 drivers/mfd/rohm-bd70528.c
 create mode 100644 include/linux/mfd/rohm-bd70528.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 26ad6468d13a..467723e04470 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1866,6 +1866,23 @@ config MFD_ROHM_BD718XX
 	  NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring
 	  and emergency shut down as well as 32,768KHz clock output.
 
+config MFD_ROHM_BD70528
+	tristate "ROHM BD70528 Power Management IC"
+	depends on I2C=y
+	depends on OF
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select MFD_CORE
+	help
+	  Select this option to get support for the ROHM BD70528 Power
+	  Management IC. BD71837 is general purpose single-chip power
+	  management IC for battery-powered portable devices. It contains
+	  3 ultra-low current consumption buck converters, 3 LDOs and 2 LED
+	  drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
+	  crystal oscillator, high-accuracy VREF for use with an external ADC,
+	  10 bits SAR ADC for battery temperature monitor and 1S battery
+	  charger.
+
 config MFD_STM32_LPTIMER
 	tristate "Support for STM32 Low-Power Timer"
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b4569ed7f3f3..dc1c9431c8d9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -246,4 +246,5 @@ obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
 obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 
diff --git a/drivers/mfd/rohm-bd70528.c b/drivers/mfd/rohm-bd70528.c
new file mode 100644
index 000000000000..55599d5c5c86
--- /dev/null
+++ b/drivers/mfd/rohm-bd70528.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2019 ROHM Semiconductors
+//
+// ROHM BD70528 PMIC driver
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BD70528_NUM_OF_GPIOS 4
+
+static const struct resource rtc_irqs[] = {
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_RTC_ALARM, "bd70528-rtc-alm"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_ELPS_TIM, "bd70528-elapsed-timer"),
+};
+
+static const struct resource charger_irqs[] = {
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_RES, "bd70528-bat-ov-res"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_DET, "bd70528-bat-ov-det"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DBAT_DET, "bd70528-bat-dead"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_RES, "bd70528-bat-warmed"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_DET, "bd70528-bat-cold"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_RES, "bd70528-bat-cooled"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_DET, "bd70528-bat-hot"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_CHG_TSD, "bd70528-chg-tshd"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_RMV, "bd70528-bat-removed"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_DET, "bd70528-bat-detected"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_RES, "bd70528-dcin2-ov-res"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_DET, "bd70528-dcin2-ov-det"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_RMV, "bd70528-dcin2-removed"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_DET, "bd70528-dcin2-detected"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_RMV, "bd70528-dcin1-removed"),
+	DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_DET, "bd70528-dcin1-detected"),
+};
+
+static struct mfd_cell bd70528_mfd_cells[] = {
+	{ .name = "bd70528-pmic", },
+	{ .name = "bd70528-gpio", },
+	/*
+	 * We use BD71837 driver to drive the clock block. Only differences to
+	 * BD70528 clock gate are the register address and mask.
+	 */
+	{ .name = "bd718xx-clk", },
+	{ .name = "bd70528-wdt", },
+	{
+		.name = "bd70528-power",
+		.resources = charger_irqs,
+		.num_resources = ARRAY_SIZE(charger_irqs),
+	}, {
+		.name = "bd70528-rtc",
+		.resources = rtc_irqs,
+		.num_resources = ARRAY_SIZE(rtc_irqs),
+	},
+};
+
+static const struct regmap_range volatile_ranges[] = {
+	{
+		.range_min = BD70528_REG_INT_MAIN,
+		.range_max = BD70528_REG_INT_OP_FAIL,
+	}, {
+		.range_min = BD70528_REG_RTC_COUNT_H,
+		.range_max = BD70528_REG_RTC_ALM_REPEAT,
+	}, {
+		/*
+		 * WDT control reg is special. Magic values must be written to
+		 * it in order to change the control. Should not be cached.
+		 */
+		.range_min = BD70528_REG_WDT_CTRL,
+		.range_max = BD70528_REG_WDT_CTRL,
+	}, {
+		/*
+		 * BD70528 also contains a few other registers which require
+		 * magic sequences to be written in order to update the value.
+		 * At least SHIPMODE, HWRESET, WARMRESET,and STANDBY
+		 */
+		.range_min = BD70528_REG_SHIPMODE,
+		.range_max = BD70528_REG_STANDBY,
+	},
+};
+
+static const struct regmap_access_table volatile_regs = {
+	.yes_ranges = &volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd70528_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &volatile_regs,
+	.max_register = BD70528_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+/*
+ * Mapping of main IRQ register bits to sub-IRQ register offsets so that we can
+ * access corect sub-IRQ registers based on bits that are set in main IRQ
+ * register.
+ */
+
+/* bit [0] - Shutdown register */
+unsigned int bit0_offsets[] = {0};	/* Shutdown register */
+unsigned int bit1_offsets[] = {1};	/* Power failure register */
+unsigned int bit2_offsets[] = {2};	/* VR FAULT register */
+unsigned int bit3_offsets[] = {3};	/* PMU register interrupts */
+unsigned int bit4_offsets[] = {4, 5};	/* Charger 1 and Charger 2 registers */
+unsigned int bit5_offsets[] = {6};	/* RTC register */
+unsigned int bit6_offsets[] = {7};	/* GPIO register */
+unsigned int bit7_offsets[] = {8};	/* Invalid operation register */
+
+static struct regmap_irq_sub_irq_map bd70528_sub_irq_offsets[] = {
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit3_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit4_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit5_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit6_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets),
+};
+
+static struct regmap_irq bd70528_irqs[] = {
+	REGMAP_IRQ_REG(BD70528_INT_LONGPUSH, 0, BD70528_INT_LONGPUSH_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_WDT, 0, BD70528_INT_WDT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_HWRESET, 0, BD70528_INT_HWRESET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RSTB_FAULT, 0, BD70528_INT_RSTB_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_VBAT_UVLO, 0, BD70528_INT_VBAT_UVLO_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_TSD, 0, BD70528_INT_TSD_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RSTIN, 0, BD70528_INT_RSTIN_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_FAULT, 1,
+		       BD70528_INT_BUCK1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_FAULT, 1,
+		       BD70528_INT_BUCK2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_FAULT, 1,
+		       BD70528_INT_BUCK3_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO1_FAULT, 1, BD70528_INT_LDO1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO2_FAULT, 1, BD70528_INT_LDO2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO3_FAULT, 1, BD70528_INT_LDO3_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_FAULT, 1, BD70528_INT_LED1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_FAULT, 1, BD70528_INT_LED2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_OCP, 2, BD70528_INT_BUCK1_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_OCP, 2, BD70528_INT_BUCK2_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_OCP, 2, BD70528_INT_BUCK3_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_OCP, 2, BD70528_INT_LED1_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_OCP, 2, BD70528_INT_LED2_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_FULLON, 2,
+		       BD70528_INT_BUCK1_FULLON_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_FULLON, 2,
+		       BD70528_INT_BUCK2_FULLON_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_SHORTPUSH, 3, BD70528_INT_SHORTPUSH_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_AUTO_WAKEUP, 3,
+		       BD70528_INT_AUTO_WAKEUP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_STATE_CHANGE, 3,
+		       BD70528_INT_STATE_CHANGE_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_OV_RES, 4, BD70528_INT_BAT_OV_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_OV_DET, 4, BD70528_INT_BAT_OV_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DBAT_DET, 4, BD70528_INT_DBAT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_RES, 4,
+		       BD70528_INT_BATTSD_COLD_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_DET, 4,
+		       BD70528_INT_BATTSD_COLD_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_RES, 4,
+		       BD70528_INT_BATTSD_HOT_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_DET, 4,
+		       BD70528_INT_BATTSD_HOT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_CHG_TSD, 4, BD70528_INT_CHG_TSD_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_RMV, 5, BD70528_INT_BAT_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_DET, 5, BD70528_INT_BAT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_RES, 5,
+		       BD70528_INT_DCIN2_OV_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_DET, 5,
+		       BD70528_INT_DCIN2_OV_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_RMV, 5, BD70528_INT_DCIN2_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_DET, 5, BD70528_INT_DCIN2_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN1_RMV, 5, BD70528_INT_DCIN1_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN1_DET, 5, BD70528_INT_DCIN1_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RTC_ALARM, 6, BD70528_INT_RTC_ALARM_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_ELPS_TIM, 6, BD70528_INT_ELPS_TIM_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO0, 7, BD70528_INT_GPIO0_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO1, 7, BD70528_INT_GPIO1_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO2, 7, BD70528_INT_GPIO2_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO3, 7, BD70528_INT_GPIO3_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK1_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK2_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK3_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_VOLT_OPFAIL, 8,
+		       BD70528_INT_LED1_VOLT_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_VOLT_OPFAIL, 8,
+		       BD70528_INT_LED2_VOLT_OPFAIL_MASK),
+};
+
+static struct regmap_irq_chip bd70528_irq_chip = {
+	.name = "bd70528_irq",
+	.main_status = BD70528_REG_INT_MAIN,
+	.irqs = &bd70528_irqs[0],
+	.num_irqs = ARRAY_SIZE(bd70528_irqs),
+	.status_base = BD70528_REG_INT_SHDN,
+	.mask_base = BD70528_REG_INT_SHDN_MASK,
+	.ack_base = BD70528_REG_INT_SHDN,
+	.type_base = BD70528_REG_GPIO1_IN,
+	.init_ack_masked = true,
+	.num_regs = 9,
+	.num_main_regs = 1,
+	.num_type_reg = 4,
+	.sub_reg_offsets = &bd70528_sub_irq_offsets[0],
+	.num_main_status_bits = 8,
+	.irq_reg_stride = 1,
+};
+
+static int bd70528_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct bd70528_data *bd70528;
+	struct regmap_irq_chip_data *irq_data;
+	int ret, i;
+
+	if (!i2c->irq) {
+		dev_err(&i2c->dev, "No IRQ configured\n");
+		return -EINVAL;
+	}
+
+	bd70528 = devm_kzalloc(&i2c->dev, sizeof(*bd70528), GFP_KERNEL);
+	if (!bd70528)
+		return -ENOMEM;
+
+	mutex_init(&bd70528->rtc_timer_lock);
+
+	dev_set_drvdata(&i2c->dev, &bd70528->chip);
+
+	bd70528->chip.chip_type = ROHM_CHIP_TYPE_BD70528;
+	bd70528->chip.regmap = devm_regmap_init_i2c(i2c, &bd70528_regmap);
+	if (IS_ERR(bd70528->chip.regmap)) {
+		dev_err(&i2c->dev, "Failed to initialize Regmap\n");
+		return PTR_ERR(bd70528->chip.regmap);
+	}
+
+	/*
+	 * Disallow type setting for all IRQs by default as most of them do not
+	 * support setting type.
+	 */
+	for (i = 0; i < ARRAY_SIZE(bd70528_irqs); i++)
+		bd70528_irqs[i].type.types_supported = 0;
+
+	/* Set IRQ typesetting information for GPIO pins 0 - 3 */
+	for (i = 0; i < BD70528_NUM_OF_GPIOS; i++) {
+		struct regmap_irq_type *type;
+
+		type = &bd70528_irqs[BD70528_INT_GPIO0 + i].type;
+		type->type_reg_offset = 2 * i;
+		type->type_rising_val = 0x20;
+		type->type_falling_val = 0x10;
+		type->type_level_high_val = 0x40;
+		type->type_level_low_val = 0x50;
+		type->types_supported = (IRQ_TYPE_EDGE_BOTH |
+				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
+	}
+
+	ret = devm_regmap_add_irq_chip(&i2c->dev, bd70528->chip.regmap,
+				       i2c->irq, IRQF_ONESHOT, 0,
+				       &bd70528_irq_chip, &irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add IRQ chip\n");
+		return ret;
+	}
+	dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n",
+		bd70528_irq_chip.num_irqs);
+
+	/*
+	 * BD70528 IRQ controller is not touching the main mask register.
+	 * So enable the GPIO block interrupts at main level. We can just leave
+	 * them enabled as the IRQ controller should disable IRQs from
+	 * sub-registers when IRQ is disabled or freed.
+	 */
+	ret = regmap_update_bits(bd70528->chip.regmap,
+				 BD70528_REG_INT_MAIN_MASK,
+				 BD70528_INT_GPIO_MASK, 0);
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   bd70528_mfd_cells,
+				   ARRAY_SIZE(bd70528_mfd_cells), NULL, 0,
+				   regmap_irq_get_domain(irq_data));
+	if (ret)
+		dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+	return ret;
+}
+
+static const struct of_device_id bd70528_of_match[] = {
+	{ .compatible = "rohm,bd70528", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bd70528_of_match);
+
+static struct i2c_driver bd70528_drv = {
+	.driver = {
+		.name = "rohm-bd70528",
+		.of_match_table = bd70528_of_match,
+	},
+	.probe = &bd70528_i2c_probe,
+};
+
+module_i2c_driver(bd70528_drv);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("ROHM BD70528 Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
new file mode 100644
index 000000000000..1013e60c5b25
--- /dev/null
+++ b/include/linux/mfd/rohm-bd70528.h
@@ -0,0 +1,408 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2018 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD70528_H__
+#define __LINUX_MFD_BD70528_H__
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/regmap.h>
+
+enum {
+	BD70528_BUCK1,
+	BD70528_BUCK2,
+	BD70528_BUCK3,
+	BD70528_LDO1,
+	BD70528_LDO2,
+	BD70528_LDO3,
+	BD70528_LED1,
+	BD70528_LED2,
+};
+
+struct bd70528_data {
+	struct rohm_regmap_dev chip;
+	struct mutex rtc_timer_lock;
+};
+
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_LDO_VOLTS 0x20
+
+#define BD70528_REG_BUCK1_EN	0x0F
+#define BD70528_REG_BUCK1_VOLT	0x15
+#define BD70528_REG_BUCK2_EN	0x10
+#define BD70528_REG_BUCK2_VOLT	0x16
+#define BD70528_REG_BUCK3_EN	0x11
+#define BD70528_REG_BUCK3_VOLT	0x17
+#define BD70528_REG_LDO1_EN	0x1b
+#define BD70528_REG_LDO1_VOLT	0x1e
+#define BD70528_REG_LDO2_EN	0x1c
+#define BD70528_REG_LDO2_VOLT	0x1f
+#define BD70528_REG_LDO3_EN	0x1d
+#define BD70528_REG_LDO3_VOLT	0x20
+#define BD70528_REG_LED_CTRL	0x2b
+#define BD70528_REG_LED_VOLT	0x29
+#define BD70528_REG_LED_EN	0x2a
+
+/* main irq registers */
+#define BD70528_REG_INT_MAIN	0x7E
+#define BD70528_REG_INT_MAIN_MASK 0x74
+
+/* 'sub irq' registers */
+#define BD70528_REG_INT_SHDN	0x7F
+#define BD70528_REG_INT_PWR_FLT	0x80
+#define BD70528_REG_INT_VR_FLT	0x81
+#define BD70528_REG_INT_MISC	0x82
+#define BD70528_REG_INT_BAT1	0x83
+#define BD70528_REG_INT_BAT2	0x84
+#define BD70528_REG_INT_RTC	0x85
+#define BD70528_REG_INT_GPIO	0x86
+#define BD70528_REG_INT_OP_FAIL	0x87
+
+#define BD70528_REG_INT_SHDN_MASK	0x75
+#define BD70528_REG_INT_PWR_FLT_MASK	0x76
+#define BD70528_REG_INT_VR_FLT_MASK	0x77
+#define BD70528_REG_INT_MISC_MASK	0x78
+#define BD70528_REG_INT_BAT1_MASK	0x79
+#define BD70528_REG_INT_BAT2_MASK	0x7a
+#define BD70528_REG_INT_RTC_MASK	0x7b
+#define BD70528_REG_INT_GPIO_MASK	0x7c
+#define BD70528_REG_INT_OP_FAIL_MASK	0x7d
+
+/* Reset related 'magic' registers */
+#define BD70528_REG_SHIPMODE	0x03
+#define BD70528_REG_HWRESET	0x04
+#define BD70528_REG_WARMRESET	0x05
+#define BD70528_REG_STANDBY	0x06
+
+/* GPIO registers */
+#define BD70528_REG_GPIO_STATE	0x8F
+
+#define BD70528_REG_GPIO1_IN	0x4d
+#define BD70528_REG_GPIO2_IN	0x4f
+#define BD70528_REG_GPIO3_IN	0x51
+#define BD70528_REG_GPIO4_IN	0x53
+#define BD70528_REG_GPIO1_OUT	0x4e
+#define BD70528_REG_GPIO2_OUT	0x50
+#define BD70528_REG_GPIO3_OUT	0x52
+#define BD70528_REG_GPIO4_OUT	0x54
+
+/* clk control */
+
+#define BD70528_REG_CLK_OUT	0x2c
+
+/* RTC */
+
+#define BD70528_REG_RTC_COUNT_H		0x2d
+#define BD70528_REG_RTC_COUNT_L		0x2e
+#define BD70528_REG_RTC_SEC		0x2f
+#define BD70528_REG_RTC_MINUTE		0x30
+#define BD70528_REG_RTC_HOUR		0x31
+#define BD70528_REG_RTC_WEEK		0x32
+#define BD70528_REG_RTC_DAY		0x33
+#define BD70528_REG_RTC_MONTH		0x34
+#define BD70528_REG_RTC_YEAR		0x35
+
+#define BD70528_REG_RTC_ALM_SEC		0x36
+#define BD70528_REG_RTC_ALM_START	BD70528_REG_RTC_ALM_SEC
+#define BD70528_REG_RTC_ALM_MINUTE	0x37
+#define BD70528_REG_RTC_ALM_HOUR	0x38
+#define BD70528_REG_RTC_ALM_WEEK	0x39
+#define BD70528_REG_RTC_ALM_DAY		0x3a
+#define BD70528_REG_RTC_ALM_MONTH	0x3b
+#define BD70528_REG_RTC_ALM_YEAR	0x3c
+#define BD70528_REG_RTC_ALM_MASK	0x3d
+#define BD70528_REG_RTC_ALM_REPEAT	0x3e
+#define BD70528_REG_RTC_START		BD70528_REG_RTC_SEC
+
+#define BD70528_REG_RTC_WAKE_SEC	0x43
+#define BD70528_REG_RTC_WAKE_START	BD70528_REG_RTC_WAKE_SEC
+#define BD70528_REG_RTC_WAKE_MIN	0x44
+#define BD70528_REG_RTC_WAKE_HOUR	0x45
+#define BD70528_REG_RTC_WAKE_CTRL	0x46
+
+#define BD70528_REG_ELAPSED_TIMER_EN	0x42
+#define BD70528_REG_WAKE_EN		0x46
+
+/* WDT registers */
+#define BD70528_REG_WDT_CTRL		0x4A
+#define BD70528_REG_WDT_HOUR		0x49
+#define BD70528_REG_WDT_MINUTE		0x48
+#define BD70528_REG_WDT_SEC		0x47
+
+/* Charger / Battery */
+#define BD70528_REG_CHG_CURR_STAT	0x59
+#define BD70528_REG_CHG_BAT_STAT	0x57
+#define BD70528_REG_CHG_BAT_TEMP	0x58
+#define BD70528_REG_CHG_IN_STAT		0x56
+#define BD70528_REG_CHG_DCIN_ILIM	0x5d
+#define BD70528_REG_CHG_CHG_CURR_WARM	0x61
+#define BD70528_REG_CHG_CHG_CURR_COLD	0x62
+
+/* Masks for main IRQ register bits */
+enum {
+	BD70528_INT_SHDN,
+#define BD70528_INT_SHDN_MASK BIT(BD70528_INT_SHDN)
+	BD70528_INT_PWR_FLT,
+#define BD70528_INT_PWR_FLT_MASK BIT(BD70528_INT_PWR_FLT)
+	BD70528_INT_VR_FLT,
+#define BD70528_INT_VR_FLT_MASK BIT(BD70528_INT_VR_FLT)
+	BD70528_INT_MISC,
+#define BD70528_INT_MISC_MASK BIT(BD70528_INT_MISC)
+	BD70528_INT_BAT1,
+#define BD70528_INT_BAT1_MASK BIT(BD70528_INT_BAT1)
+	BD70528_INT_RTC,
+#define BD70528_INT_RTC_MASK BIT(BD70528_INT_RTC)
+	BD70528_INT_GPIO,
+#define BD70528_INT_GPIO_MASK BIT(BD70528_INT_GPIO)
+	BD70528_INT_OP_FAIL,
+#define BD70528_INT_OP_FAIL_MASK BIT(BD70528_INT_OP_FAIL)
+};
+
+/* IRQs */
+enum {
+	/* Shutdown register IRQs */
+	BD70528_INT_LONGPUSH,
+	BD70528_INT_WDT,
+	BD70528_INT_HWRESET,
+	BD70528_INT_RSTB_FAULT,
+	BD70528_INT_VBAT_UVLO,
+	BD70528_INT_TSD,
+	BD70528_INT_RSTIN,
+	/* Power failure register IRQs */
+	BD70528_INT_BUCK1_FAULT,
+	BD70528_INT_BUCK2_FAULT,
+	BD70528_INT_BUCK3_FAULT,
+	BD70528_INT_LDO1_FAULT,
+	BD70528_INT_LDO2_FAULT,
+	BD70528_INT_LDO3_FAULT,
+	BD70528_INT_LED1_FAULT,
+	BD70528_INT_LED2_FAULT,
+	/* VR FAULT register IRQs */
+	BD70528_INT_BUCK1_OCP,
+	BD70528_INT_BUCK2_OCP,
+	BD70528_INT_BUCK3_OCP,
+	BD70528_INT_LED1_OCP,
+	BD70528_INT_LED2_OCP,
+	BD70528_INT_BUCK1_FULLON,
+	BD70528_INT_BUCK2_FULLON,
+	/* PMU register interrupts */
+	BD70528_INT_SHORTPUSH,
+	BD70528_INT_AUTO_WAKEUP,
+	BD70528_INT_STATE_CHANGE,
+	/* Charger 1 register IRQs */
+	BD70528_INT_BAT_OV_RES,
+	BD70528_INT_BAT_OV_DET,
+	BD70528_INT_DBAT_DET,
+	BD70528_INT_BATTSD_COLD_RES,
+	BD70528_INT_BATTSD_COLD_DET,
+	BD70528_INT_BATTSD_HOT_RES,
+	BD70528_INT_BATTSD_HOT_DET,
+	BD70528_INT_CHG_TSD,
+	/* Charger 2 register IRQs */
+	BD70528_INT_BAT_RMV,
+	BD70528_INT_BAT_DET,
+	BD70528_INT_DCIN2_OV_RES,
+	BD70528_INT_DCIN2_OV_DET,
+	BD70528_INT_DCIN2_RMV,
+	BD70528_INT_DCIN2_DET,
+	BD70528_INT_DCIN1_RMV,
+	BD70528_INT_DCIN1_DET,
+	/* RTC register IRQs */
+	BD70528_INT_RTC_ALARM,
+	BD70528_INT_ELPS_TIM,
+	/* GPIO register IRQs */
+	BD70528_INT_GPIO0,
+	BD70528_INT_GPIO1,
+	BD70528_INT_GPIO2,
+	BD70528_INT_GPIO3,
+	/* Invalid operation register IRQs */
+	BD70528_INT_BUCK1_DVS_OPFAIL,
+	BD70528_INT_BUCK2_DVS_OPFAIL,
+	BD70528_INT_BUCK3_DVS_OPFAIL,
+	BD70528_INT_LED1_VOLT_OPFAIL,
+	BD70528_INT_LED2_VOLT_OPFAIL,
+};
+
+/* Masks */
+#define BD70528_INT_LONGPUSH_MASK 0x1
+#define BD70528_INT_WDT_MASK 0x2
+#define BD70528_INT_HWRESET_MASK 0x4
+#define BD70528_INT_RSTB_FAULT_MASK 0x8
+#define BD70528_INT_VBAT_UVLO_MASK 0x10
+#define BD70528_INT_TSD_MASK 0x20
+#define BD70528_INT_RSTIN_MASK 0x40
+
+#define BD70528_INT_BUCK1_FAULT_MASK 0x1
+#define BD70528_INT_BUCK2_FAULT_MASK 0x2
+#define BD70528_INT_BUCK3_FAULT_MASK 0x4
+#define BD70528_INT_LDO1_FAULT_MASK 0x8
+#define BD70528_INT_LDO2_FAULT_MASK 0x10
+#define BD70528_INT_LDO3_FAULT_MASK 0x20
+#define BD70528_INT_LED1_FAULT_MASK 0x40
+#define BD70528_INT_LED2_FAULT_MASK 0x80
+
+#define BD70528_INT_BUCK1_OCP_MASK 0x1
+#define BD70528_INT_BUCK2_OCP_MASK 0x2
+#define BD70528_INT_BUCK3_OCP_MASK 0x4
+#define BD70528_INT_LED1_OCP_MASK 0x8
+#define BD70528_INT_LED2_OCP_MASK 0x10
+#define BD70528_INT_BUCK1_FULLON_MASK 0x20
+#define BD70528_INT_BUCK2_FULLON_MASK 0x40
+
+#define BD70528_INT_SHORTPUSH_MASK 0x1
+#define BD70528_INT_AUTO_WAKEUP_MASK 0x2
+#define BD70528_INT_STATE_CHANGE_MASK 0x10
+
+#define BD70528_INT_BAT_OV_RES_MASK 0x1
+#define BD70528_INT_BAT_OV_DET_MASK 0x2
+#define BD70528_INT_DBAT_DET_MASK 0x4
+#define BD70528_INT_BATTSD_COLD_RES_MASK 0x8
+#define BD70528_INT_BATTSD_COLD_DET_MASK 0x10
+#define BD70528_INT_BATTSD_HOT_RES_MASK 0x20
+#define BD70528_INT_BATTSD_HOT_DET_MASK 0x40
+#define BD70528_INT_CHG_TSD_MASK 0x80
+
+#define BD70528_INT_BAT_RMV_MASK 0x1
+#define BD70528_INT_BAT_DET_MASK 0x2
+#define BD70528_INT_DCIN2_OV_RES_MASK 0x4
+#define BD70528_INT_DCIN2_OV_DET_MASK 0x8
+#define BD70528_INT_DCIN2_RMV_MASK 0x10
+#define BD70528_INT_DCIN2_DET_MASK 0x20
+#define BD70528_INT_DCIN1_RMV_MASK 0x40
+#define BD70528_INT_DCIN1_DET_MASK 0x80
+
+#define BD70528_INT_RTC_ALARM_MASK 0x1
+#define BD70528_INT_ELPS_TIM_MASK 0x2
+
+#define BD70528_INT_GPIO0_MASK 0x1
+#define BD70528_INT_GPIO1_MASK 0x2
+#define BD70528_INT_GPIO2_MASK 0x4
+#define BD70528_INT_GPIO3_MASK 0x8
+
+#define BD70528_INT_BUCK1_DVS_OPFAIL_MASK 0x1
+#define BD70528_INT_BUCK2_DVS_OPFAIL_MASK 0x2
+#define BD70528_INT_BUCK3_DVS_OPFAIL_MASK 0x4
+#define BD70528_INT_LED1_VOLT_OPFAIL_MASK 0x10
+#define BD70528_INT_LED2_VOLT_OPFAIL_MASK 0x20
+
+#define BD70528_DEBOUNCE_MASK 0x3
+
+#define BD70528_DEBOUNCE_DISABLE 0
+#define BD70528_DEBOUNCE_15MS 1
+#define BD70528_DEBOUNCE_30MS 2
+#define BD70528_DEBOUNCE_50MS 3
+
+#define BD70528_GPIO_DRIVE_MASK 0x2
+#define BD70528_GPIO_PUSH_PULL 0x0
+#define BD70528_GPIO_OPEN_DRAIN 0x2
+
+#define BD70528_GPIO_OUT_EN_MASK 0x80
+#define BD70528_GPIO_OUT_ENABLE 0x80
+#define BD70528_GPIO_OUT_DISABLE 0x0
+
+#define BD70528_GPIO_OUT_HI 0x1
+#define BD70528_GPIO_OUT_LO 0x0
+#define BD70528_GPIO_OUT_MASK 0x1
+
+#define BD70528_GPIO_IN_STATE_BASE 1
+
+#define BD70528_CLK_OUT_EN_MASK 0x1
+
+/* RTC masks to mask out reserved bits */
+
+#define BD70528_MASK_RTC_SEC		0x7f
+#define BD70528_MASK_RTC_MINUTE		0x7f
+#define BD70528_MASK_RTC_HOUR_24H	0x80
+#define BD70528_MASK_RTC_HOUR_PM	0x20
+#define BD70528_MASK_RTC_HOUR		0x1f
+#define BD70528_MASK_RTC_DAY		0x3f
+#define BD70528_MASK_RTC_WEEK		0x07
+#define BD70528_MASK_RTC_MONTH		0x1f
+#define BD70528_MASK_RTC_YEAR		0xff
+#define BD70528_MASK_RTC_COUNT_L	0x7f
+
+#define BD70528_MASK_ELAPSED_TIMER_EN	0x1
+/* Mask second, min and hour fields
+ * HW would support ALM irq for over 24h
+ * (by setting day, month and year too)
+ * but as we wish to keep this same as for
+ * wake-up we limit ALM to 24H and only
+ * unmask sec, min and hour
+ */
+#define BD70528_MASK_ALM_EN		0x7
+#define BD70528_MASK_WAKE_EN		0x1
+
+/* WDT masks */
+#define BD70528_MASK_WDT_EN		0x1
+#define BD70528_MASK_WDT_HOUR		0x1
+#define BD70528_MASK_WDT_MINUTE		0x7f
+#define BD70528_MASK_WDT_SEC		0x7f
+
+#define BD70528_WDT_STATE_BIT		0x1
+#define BD70528_ELAPSED_STATE_BIT	0x2
+#define BD70528_WAKE_STATE_BIT		0x4
+
+/* Charger masks */
+#define BD70528_MASK_CHG_STAT		0x7f
+#define BD70528_MASK_CHG_BAT_TIMER	0x20
+#define BD70528_MASK_CHG_BAT_OVERVOLT	0x10
+#define BD70528_MASK_CHG_BAT_DETECT	0x1
+#define BD70528_MASK_CHG_DCIN1_UVLO	0x1
+#define BD70528_MASK_CHG_DCIN_ILIM	0x3f
+#define BD70528_MASK_CHG_CHG_CURR	0x1f
+#define BD70528_MASK_CHG_TRICKLE_CURR	0x10
+
+/*
+ * Note, external battery register is the lonely rider at
+ * address 0xc5. See how to stuff that in the regmap
+ */
+#define BD70528_MAX_REGISTER 0x94
+
+/* Buck control masks */
+#define BD70528_MASK_RUN_EN	0x4
+#define BD70528_MASK_STBY_EN	0x2
+#define BD70528_MASK_IDLE_EN	0x1
+#define BD70528_MASK_LED1_EN	0x1
+#define BD70528_MASK_LED2_EN	0x10
+
+#define BD70528_MASK_BUCK_VOLT	0xf
+#define BD70528_MASK_LDO_VOLT	0x1f
+#define BD70528_MASK_LED1_VOLT	0x1
+#define BD70528_MASK_LED2_VOLT	0x10
+
+/* Misc irq masks */
+#define BD70528_INT_MASK_SHORT_PUSH	1
+#define BD70528_INT_MASK_AUTO_WAKE	2
+#define BD70528_INT_MASK_POWER_STATE	4
+
+#define BD70528_MASK_BUCK_RAMP 0x10
+#define BD70528_SIFT_BUCK_RAMP 4
+
+#if IS_ENABLED(CONFIG_BD70528_WATCHDOG)
+
+int bd70528_wdt_set(struct rohm_regmap_dev *data, int enable, int *old_state);
+void bd70528_wdt_lock(struct rohm_regmap_dev *data);
+void bd70528_wdt_unlock(struct rohm_regmap_dev *data);
+
+#else /* CONFIG_BD70528_WATCHDOG */
+
+static inline int bd70528_wdt_set(struct rohm_regmap_dev *data, int enable,
+				  int *old_state)
+{
+	return 0;
+}
+
+static inline void bd70528_wdt_lock(struct rohm_regmap_dev *data)
+{
+}
+
+static inline void bd70528_wdt_unlock(struct rohm_regmap_dev *data)
+{
+}
+
+#endif /* CONFIG_BD70528_WATCHDOG */
+
+#endif /* __LINUX_MFD_BD70528_H__ */
-- 
2.17.2


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux