>From: Fabio Estevam [mailto:festevam@xxxxxxxxx] >Sent: Montag, 13. November 2017 19:57 >> I don't recall of any recent change in this area. >> I don't think the behavior changed recently. I tried a kernel 4.4.65 and it shows the same symptoms. I guess Noel really means 3.19-> 4.0. >> Patrick/Noel, >> >> Does the change below help? Unfortunately no. Did you run hwclock or rtctest? I still see: root@CX9020:~# cat /proc/interrupts | grep rtc 40: 0 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc root@CX9020:~# hwclock -D -r hwclock from util-linux 2.29.2 Using the /dev interface to the clock. Last drift adjustment done at 1490885082 seconds after 1969 Last calibration done at 1490885082 seconds after 1969 Hardware clock is on UTC time Assuming hardware clock is kept in UTC time. Waiting for clock tick... [ 41.035269] irq 40: nobody cared (try booting with the "irqpoll" option) [ 41.042514] handlers: [ 41.044847] [<c06031e0>] dryice_irq [ 41.048398] Disabling IRQ #40 select() to /dev/rtc to wait for clock tick timed out...synchronization failed root@CX9020:~# cat /proc/interrupts | grep rtc 40: 100000 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc or if I run rtctest from tools/testing/selftests/timers/ (after reboot): root@CX9020:~# cat /proc/interrupts | grep rtc 40: 0 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc root@CX9020:~# ./rtctest RTC Driver Test Example. Counting 5 update (1/sec) interrupts from reading /dev/rtc0:[ 37.550399] irq 40: nobody cared (try booting with the "irqpoll" option) [ 37.557646] handlers: [ 37.559980] [<c06031e0>] dryice_irq [ 37.563532] Disabling IRQ #40 ^C root@CX9020:~# cat /proc/interrupts | grep rtc 40: 100000 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc With the attached patch I get rid of the unhandled interrupts. But that patch just ACKs everything. root@CX9020:~# cat /proc/interrupts | grep rtc 40: 0 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc root@CX9020:~# hwclock -D -r hwclock from util-linux 2.29.2 Using the /dev interface to the clock. Last drift adjustment done at 1490885082 seconds after 1969 Last calibration done at 1490885082 seconds after 1969 Hardware clock is on UTC time Assuming hardware clock is kept in UTC time. Waiting for clock tick... select() to /dev/rtc to wait for clock tick timed out...synchronization failed root@CX9020:~# cat /proc/interrupts | grep rtc 40: 301844 tzic 24 Edge 53fa4000.srtc 41: 0 tzic 25 Edge 53fa4000.srtc >From 422747686f5723ac75b98ad610b3ef4d94ef271f Mon Sep 17 00:00:00 2001 From: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> Date: Tue, 14 Nov 2017 05:23:24 +0100 Subject: [PATCH] XXX: disable interrupts manually --- drivers/rtc/rtc-imxdi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index 80931114c899..4b64a5350bac 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -686,6 +686,24 @@ static irqreturn_t dryice_irq(int irq, void *dev_id) dier = readl(imxdi->ioaddr + DIER); dsr = readl(imxdi->ioaddr + DSR); + /* ack monotonic counter overflow */ + if (DSR_MCO == dsr) { + return IRQ_HANDLED; + } + if (dier & DIER_WCIE) { + if (dsr & DSR_MCO) { + di_int_disable(imxdi, DIER_WCIE); + return IRQ_HANDLED; + } + } + + if (dier & DIER_CAIE) { + if (dsr & DSR_MCO) { + di_int_disable(imxdi, DIER_CAIE); + return IRQ_HANDLED; + } + } + /* handle the security violation event */ if (dier & DIER_SVIE) { if (dsr & DSR_SVF) { @@ -710,7 +728,10 @@ static irqreturn_t dryice_irq(int irq, void *dev_id) operations. It means the interrupt is for DryIce -Security. IRQ must be returned as none.*/ if (list_empty_careful(&imxdi->write_wait.head)) + { + printk("rtc: XXXX: dier: 0x%x dsr: 0x%x\n", dier, dsr); return rc; + } /* DSR_WCF clears itself on DSR read */ if (dsr & (DSR_WCF | DSR_WEF)) { @@ -737,6 +758,9 @@ static irqreturn_t dryice_irq(int irq, void *dev_id) rc = IRQ_HANDLED; } } + if (rc != IRQ_HANDLED) { + printk("rtc: XXXX: dier: 0x%x dsr: 0x%x\n", dier, dsr); + } return rc; } -- 2.11.0 Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff Registered office: Verl, Germany | Register court: Guetersloh HRA 7075
