On Thu, Jul 13, 2017 at 12:54:24PM -0700, Moritz Fischer wrote: > This adds a binding for the Maxim/Dallas DS1374 MFD. > > Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx> > --- > Changes from RFC: > - dallas,ds1374-mode -> dallas,mode > - Clarified examples > - dallas,remap-reset property > > On second thoughts the solution for the remapping found in the > discussion did not seem to be a good solution, since the INT > pin indicating watchdog reset does not necessarily have to be > connected to an interrupt line on the machine, it could equally > well be hooked up to a PMIC reset input or similar. > In that case using the presence of an 'interrupt' phandle is not > a good choice. > > Cheers, > > Moritz > > --- > Documentation/devicetree/bindings/mfd/ds1374.txt | 88 ++++++++++++++++++++++ > .../devicetree/bindings/trivial-devices.txt | 1 - > drivers/rtc/Kconfig | 2 + This belongs in patch 2. With that dropped, Acked-by: Rob Herring <robh@xxxxxxxxxx> > 3 files changed, 90 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mfd/ds1374.txt
