Hi Krzysztof,
Thanks for looking into this!
I tested your patchset on the QDrive3 on a CentOS Stream 9 RT kernel (I
couldn't test it on mainline because the latest RT patchset only supports
6.1 which is missing some bits needed to boot QDrive3).
It fixes the PSCI cpuidle issue I was encountering in [1]. However, I may
have found another code path that triggers a similar issue:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 113, name: kworker/4:2
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by kworker/4:2/113:
#0: ffff09b0c2376928 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x1f4/0x7c0
#1: ffff800008bf3dd0 ((work_completion)(&genpd->power_off_work)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x7c0
#2: ffff09b0c2e44860 (&genpd->rslock){....}-{2:2}, at: genpd_lock_rawspin+0x20/0x30
#3: ffff09b0c6696a20 (&dev->power.lock){+.+.}-{2:2}, at: dev_pm_qos_flags+0x2c/0x60
irq event stamp: 170
hardirqs last enabled at (169): [<ffffa1be822f8a78>] _raw_spin_unlock_irq+0x48/0xc4
hardirqs last disabled at (170): [<ffffa1be822f8df4>] _raw_spin_lock_irqsave+0xb0/0xfc
softirqs last enabled at (0): [<ffffa1be814cfff0>] copy_process+0x68c/0x1500
softirqs last disabled at (0): [<0000000000000000>] 0x0
Preemption disabled at:
[<ffffa1be81d7e620>] genpd_lock_rawspin+0x20/0x30
CPU: 4 PID: 113 Comm: kworker/4:2 Tainted: G X --------- --- 5.14.0-rt14+ #2
Hardware name: Qualcomm SA8540 ADP (DT)
Workqueue: pm genpd_power_off_work_fn
Call trace:
dump_backtrace+0xb4/0x12c
show_stack+0x1c/0x70
dump_stack_lvl+0x98/0xd0
dump_stack+0x14/0x2c
__might_resched+0x180/0x220
rt_spin_lock+0x74/0x11c
dev_pm_qos_flags+0x2c/0x60
genpd_power_off.part.0.isra.0+0xac/0x2d0
genpd_power_off_work_fn+0x68/0x8c
process_one_work+0x2b8/0x7c0
worker_thread+0x15c/0x44c
kthread+0xf8/0x104
ret_from_fork+0x10/0x20
This happens consistently during boot. But on the mainline kernel, this
code path has changed: genpd_power_off no longer calls dev_pm_qos_flags.
So it might not happen on mainline. I hope to be able to test your
patchset again soon on mainline with the next version of the RT patchset
(which should be able to boot the QDrive3).
Best,
Adrien
[1] https://lore.kernel.org/all/20220615203605.1068453-1-athierry@xxxxxxxxxx/
