arm64: imx8qxp: irq 464: nobody cared (try booting with the "irqpoll" option)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

applied patch-5.4.70-rt40 over linux-imx from nxp
(imx_5.4.70_2.3.0), this since imx8qxp-mek board seems not
totally supported in mainline stable 5.4.

The patch applies properly, but at boot, at 50% of the cases,
i get:

[    2.229242] 003: usb_phy_generic bus@5b000000:usb3-phy:
bus@5b000000:usb3-phy supply vcc not found, using dummy regulator
[    2.231782] 003: gpio-42 (scl): enforced open drain please flag it
properly in DT/ACPI DSDT/board file
[    2.231799] 003: imx-lpi2c 37230000.i2c: using scl,sda for recovery
[    2.232464] 003: pca953x 16-0020: using no AI
[    2.517161] 000: irq 464: nobody cared (try booting with the
"irqpoll" option)
[    2.517170] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted
5.4.70-rt40-00116-gc1de1cbc567a-dirty #51
[    2.517176] 000: Hardware name: Freescale i.MX8QXP MEK (DT)
[    2.517181] 000: Call trace:
[    2.517182] 000:  dump_backtrace+0x0/0x140
[    2.517195] 000:  show_stack+0x14/0x20
[    2.517200] 000:  dump_stack+0xb0/0x10c
[    2.517208] 000:  __report_bad_irq+0x48/0xd8
[    2.517215] 000:  note_interrupt+0x2bc/0x374
[    2.517220] 000:  handle_irq_event_percpu+0xa4/0xb0
[    2.517228] 000:  handle_irq_event+0x74/0x118
[    2.517233] 000:  handle_edge_irq+0xbc/0x200
[    2.517238] 000:  generic_handle_irq+0x24/0x38
[    2.517244] 000:  imx_intmux_irq_handler+0xac/0x140
[    2.517252] 000:  generic_handle_irq+0x24/0x38
[    2.517259] 000:  __handle_domain_irq+0x90/0x100
[    2.517267] 000:  gic_handle_irq+0x5c/0x14c
[    2.517272] 000:  el1_irq+0xb8/0x180
[    2.517277] 000:  arch_cpu_idle+0x1c/0x30
[    2.517284] 000:  default_idle_call+0x20/0x48
[    2.517291] 000:  do_idle+0x248/0x288
[    2.517297] 000:  cpu_startup_entry+0x24/0x78
[    2.517303] 000:  rest_init+0xd4/0xe0
[    2.517308] 000:  arch_call_rest_init+0xc/0x14
[    2.517316] 000:  start_kernel+0x414/0x448
[    2.517322] 000: handlers:
[    2.517331] 000: [<00000000206db772>] irq_default_primary_handler
threaded [<00000000ffd05448>] lpi2c_imx_isr
[    2.517341] 000: Disabling IRQ #464

I know nxp related issues are probably now welcome here,
but if some chance/hint to have rt working, welcome.

Regards,

-- 
Angelo Dureghello
+++ kernelspace +++
+E: angelo@xxxxxxxxxxxxxxxx




[Index of Archives]     [RT Stable]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux