On 2020-06-16 13:11:51 [-0300], Marcelo Tosatti wrote:
> Remote draining of pages was removed from 5.6-rt.
>
> Unfortunately its necessary for use-cases which have a busy spinning
> SCHED_FIFO thread on isolated CPU:
>
> [ 7475.821066] INFO: task ld:274531 blocked for more than 600 seconds.
> [ 7475.822157] Not tainted 4.18.0-208.rt5.20.el8.x86_64 #1
> [ 7475.823094] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message.
> [ 7475.824392] ld D 0 274531 274530 0x00084080
> [ 7475.825307] Call Trace:
> [ 7475.825761] __schedule+0x342/0x850
> [ 7475.826377] schedule+0x39/0xd0
> [ 7475.826923] schedule_timeout+0x20e/0x410
> [ 7475.827610] ? __schedule+0x34a/0x850
> [ 7475.828247] ? ___preempt_schedule+0x16/0x18
> [ 7475.828953] wait_for_completion+0x85/0xe0
> [ 7475.829653] flush_work+0x11a/0x1c0
> [ 7475.830313] ? flush_workqueue_prep_pwqs+0x130/0x130
> [ 7475.831148] drain_all_pages+0x140/0x190
> [ 7475.831803] __alloc_pages_slowpath+0x3f8/0xe20
> [ 7475.832571] ? mem_cgroup_commit_charge+0xcb/0x510
> [ 7475.833371] __alloc_pages_nodemask+0x1ca/0x2b0
> [ 7475.834134] pagecache_get_page+0xb5/0x2d0
> [ 7475.834814] ? account_page_dirtied+0x11a/0x220
> [ 7475.835579] grab_cache_page_write_begin+0x1f/0x40
> [ 7475.836379] iomap_write_begin.constprop.44+0x1c1/0x370
> [ 7475.837241] ? iomap_write_end+0x91/0x290
> [ 7475.837911] iomap_write_actor+0x92/0x170
> ...
>
> So enable remote draining again.
Is upstream affected by this? And if not, why not?
> Index: linux-rt-devel/mm/page_alloc.c
> ===================================================================
> --- linux-rt-devel.orig/mm/page_alloc.c
> +++ linux-rt-devel/mm/page_alloc.c
> @@ -360,6 +360,16 @@ EXPORT_SYMBOL(nr_online_nodes);
>
> static DEFINE_LOCAL_IRQ_LOCK(pa_lock);
>
> +#ifdef CONFIG_PREEMPT_RT
> +# define cpu_lock_irqsave(cpu, flags) \
> + local_lock_irqsave_on(pa_lock, flags, cpu)
> +# define cpu_unlock_irqrestore(cpu, flags) \
> + local_unlock_irqrestore_on(pa_lock, flags, cpu)
> +#else
> +# define cpu_lock_irqsave(cpu, flags) local_irq_save(flags)
> +# define cpu_unlock_irqrestore(cpu, flags) local_irq_restore(flags)
> +#endif
This is going to be tough. I removed the cross-CPU local-locks from RT
because it does something different for !RT. Furthermore we have
local_locks in upstream as of v5.8-rc1, see commit
91710728d1725 ("locking: Introduce local_lock()")
so whatever happens here should have upstream blessing or I will be
forced to drop the patch again while moving forward.
Before this, I looked for cases where remote drain is useful / needed
and didn't find one. I talked to Frederick and for the NO_HZ_FULL people
it is not a problem because they don't go to kernel and so they never
got anything on their per-CPU list.
We had this
https://lore.kernel.org/linux-mm/20190424111208.24459-1-bigeasy@xxxxxxxxxxxxx/
Sebastian
