[PATCH RT 2/2] serial: 8250: fsl/ingenic/mtk: fix atomic console

[John Ogness <john.ogness@xxxxxxxxxxxxx>]

A few 8250 implementations have their own IER access. If the port
is a console, wrap the accesses with console_atomic_lock.

Signed-off-by: John Ogness <john.ogness@xxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_fsl.c     |  9 ++++++++
 drivers/tty/serial/8250/8250_ingenic.c |  7 +++++++
 drivers/tty/serial/8250/8250_mtk.c     | 29 ++++++++++++++++++++++++--
 3 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index aa0e216d5ead..8f711afadd4b 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -57,9 +57,18 @@ int fsl8250_handle_irq(struct uart_port *port)
 
 	/* Stop processing interrupts on input overrun */
 	if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+		unsigned int ca_flags;
 		unsigned long delay;
+		bool is_console;
 
+		is_console = uart_console(port);
+
+		if (is_console)
+			console_atomic_lock(&ca_flags);
 		up->ier = port->serial_in(port, UART_IER);
+		if (is_console)
+			console_atomic_unlock(ca_flags);
+
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
 		} else {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 424c07c5f629..47f1482bd818 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -146,6 +146,8 @@ OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
 
 static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 {
+	unsigned int flags;
+	bool is_console;
 	int ier;
 
 	switch (offset) {
@@ -167,7 +169,12 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 		 * If we have enabled modem status IRQs we should enable
 		 * modem mode.
 		 */
+		is_console = uart_console(p);
+		if (is_console)
+			console_atomic_lock(&flags);
 		ier = p->serial_in(p, UART_IER);
+		if (is_console)
+			console_atomic_unlock(flags);
 
 		if (ier & UART_IER_MSI)
 			value |= UART_MCR_MDCE | UART_MCR_FCM;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 4d067f515f74..b509c3de0301 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -212,12 +212,37 @@ static void mtk8250_shutdown(struct uart_port *port)
 
 static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask)
 {
-	serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask));
+	struct uart_port *port = &up->port;
+	unsigned int flags;
+	unsigned int ier;
+	bool is_console;
+
+	is_console = uart_console(port);
+
+	if (is_console)
+		console_atomic_lock(&flags);
+
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, ier & (~mask));
+
+	if (is_console)
+		console_atomic_unlock(flags);
 }
 
 static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask)
 {
-	serial_out(up, UART_IER, serial_in(up, UART_IER) | mask);
+	struct uart_port *port = &up->port;
+	unsigned int flags;
+	unsigned int ier;
+
+	if (uart_console(port))
+		console_atomic_lock(&flags);
+
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, ier | mask);
+
+	if (uart_console(port))
+		console_atomic_unlock(flags);
 }
 
 static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
-- 
2.20.1