kernel 3.2.0 with rt patch-3.2-rt10.patch.gz hangs up Ethernet module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sir :

I try kernel version 3.2.0 and RT patch patch-3.2-rt10.patch.gz on TI 
AM335x EVM(Cortex A8), I find out a problem. 

My test steps as below :

1. In pure linux directory, I use zcat ../../patch-3.2-rt10.patch.gz | 
patch -p1 command. (pure means I install TI’s SDK : ti-sdk-am335x-evm-
0.6.00.00.00-linux-x86-install.bin without changing anything) 

In linux directory : 
2. make ARCH=arm CROSS_COMPILE=/home/marcus/ti-sdk-am335x-evm-
06.00.00.00/linux-devkit/sysroots/i686-arago-linux/usr/bin/arm-linux-
gnueabihf- tisdk_am335x-evm_defconfig 
3. make ARCH=arm CROSS_COMPILE=/home/marcus/ti-sdk-am335x-evm-
06.00.00.00/linux-devkit/sysroots/i686-arago-linux/usr/bin/arm-linux-
gnueabihf- menuconfig 
4. Select kernel Features and preemption Model Fully Preemptible 
Kernel(RT) 
5. Save .config 
6. make ARCH=arm CROSS_COMPILE=/home/marcus/ti-sdk-am335x-evm-
06.00.00.00/linux-devkit/sysroots/i686-arago-linux/usr/bin/arm-linux-
gnueabihf- uImage 
7. After building successfully, copy uImage to SD card and power on the 
EVM board.

8. Executing iperf -s on linux platform and execute iperf.exe –c 
10.0.0.180 –w 100M –t 1200 –I 10 on win 7 platform. 
9. Ethernet module on linux platform hangs up.(I can’t ping my PC in 
linux platform even though I use ipconfig eth0 down and ipconfig eth0 up 
command) 

Could you give me some suggestion?

I have tried not to enable RT support and use iperf to test, the testing 
result is good.

Best regard,

Marcus��.n��������+%������w��{.n�����{�����ǫ���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f




[Index of Archives]     [RT Stable]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux