On 13-09-20 02:04 PM, Jan Kiszka wrote:
> On 2013-09-20 19:51, Paul Gortmaker wrote:
>> [Re: [PATCH 0/3] KVM: Make kvm_lock non-raw] On 16/09/2013 (Mon 18:12) Paul Gortmaker wrote:
>>
>>> On 13-09-16 10:06 AM, Paolo Bonzini wrote:
>>>> Paul Gortmaker reported a BUG on preempt-rt kernels, due to taking the
>>>> mmu_lock within the raw kvm_lock in mmu_shrink_scan. He provided a
>>>> patch that shrunk the kvm_lock critical section so that the mmu_lock
>>>> critical section does not nest with it, but in the end there is no reason
>>>> for the vm_list to be protected by a raw spinlock. Only manipulations
>>>> of kvm_usage_count and the consequent hardware_enable/disable operations
>>>> are not preemptable.
>>>>
>>>> This small series thus splits the kvm_lock in the "raw" part and the
>>>> "non-raw" part.
>>>>
>>>> Paul, could you please provide your Tested-by?
>>>
>>> Sure, I'll go back and see if I can find what triggered it in the
>>> original report, and give the patches a spin on 3.4.x-rt (and probably
>>> 3.10.x-rt, since that is where rt-current is presently).
>>
>> Seems fine on 3.4-rt. On 3.10.10-rt7 it looks like there are other
>> issues, probably not explicitly related to this patchset (see below).
>>
>> Paul.
>> --
>>
>> e1000e 0000:00:19.0 eth1: removed PHC
>> assign device 0:0:19.0
>> pci 0000:00:19.0: irq 43 for MSI/MSI-X
>> pci 0000:00:19.0: irq 43 for MSI/MSI-X
>> pci 0000:00:19.0: irq 43 for MSI/MSI-X
>> pci 0000:00:19.0: irq 43 for MSI/MSI-X
>> BUG: sleeping function called from invalid context at /home/paul/git/linux-rt/kernel/rtmutex.c:659
>> in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0
>> 2 locks held by swapper/0/0:
>> #0: (rcu_read_lock){.+.+.+}, at: [<ffffffff8100998a>] kvm_set_irq_inatomic+0x2a/0x4a0
>> #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81038800>] kvm_irq_delivery_to_apic_fast+0x60/0x3d0
>> irq event stamp: 6121390
>> hardirqs last enabled at (6121389): [<ffffffff819f9ae0>] restore_args+0x0/0x30
>> hardirqs last disabled at (6121390): [<ffffffff819f9a2a>] common_interrupt+0x6a/0x6f
>> softirqs last enabled at (0): [< (null)>] (null)
>> softirqs last disabled at (0): [< (null)>] (null)
>> Preemption disabled at:[<ffffffff810ebb9a>] cpu_startup_entry+0x1ba/0x430
>>
>> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.10-rt7 #2
>> Hardware name: Dell Inc. OptiPlex 990/0VNP2H, BIOS A17 03/14/2013
>> ffffffff8201c440 ffff880223603cf0 ffffffff819f177d ffff880223603d18
>> ffffffff810c90d3 ffff880214a50110 0000000000000001 0000000000000001
>> ffff880223603d38 ffffffff819f89a4 ffff880214a50110 ffff880214a50110
>> Call Trace:
>> <IRQ> [<ffffffff819f177d>] dump_stack+0x19/0x1b
>> [<ffffffff810c90d3>] __might_sleep+0x153/0x250
>> [<ffffffff819f89a4>] rt_spin_lock+0x24/0x60
>> [<ffffffff810ccdd6>] __wake_up+0x36/0x70
>> [<ffffffff81003bbb>] kvm_vcpu_kick+0x3b/0xd0
>
> -rt lacks an atomic waitqueue for triggering VCPU wakeups on MSIs from
> assigned devices directly from the host IRQ handler. We need to disable
> this fast-path in -rt or introduce such an abstraction (I did this once
> over 2.6.33-rt).
Ah, right -- the simple wait queue support (currently -rt specific)
would have to be used here. It is on the todo list to get that moved
from -rt into mainline.
Paul.
--
>
> IIRC, VFIO goes the slower patch via a kernel thread unconditionally,
> thus cannot trigger this. Only legacy device assignment is affected.
>
> Jan
>
>> [<ffffffff810371a2>] __apic_accept_irq+0x2b2/0x3a0
>> [<ffffffff810385f7>] kvm_apic_set_irq+0x27/0x30
>> [<ffffffff8103894e>] kvm_irq_delivery_to_apic_fast+0x1ae/0x3d0
>> [<ffffffff81038800>] ? kvm_irq_delivery_to_apic_fast+0x60/0x3d0
>> [<ffffffff81009a8b>] kvm_set_irq_inatomic+0x12b/0x4a0
>> [<ffffffff8100998a>] ? kvm_set_irq_inatomic+0x2a/0x4a0
>> [<ffffffff8100c5b3>] kvm_assigned_dev_msi+0x23/0x40
>> [<ffffffff8113cb38>] handle_irq_event_percpu+0x88/0x3d0
>> [<ffffffff810ebb7c>] ? cpu_startup_entry+0x19c/0x430
>> [<ffffffff8113cec8>] handle_irq_event+0x48/0x70
>> [<ffffffff8113f9b7>] handle_edge_irq+0x77/0x120
>> [<ffffffff8104c6ae>] handle_irq+0x1e/0x30
>> [<ffffffff81a035ca>] do_IRQ+0x5a/0xd0
>> [<ffffffff819f9a2f>] common_interrupt+0x6f/0x6f
>> <EOI> [<ffffffff819f9ae0>] ? retint_restore_args+0xe/0xe
>> [<ffffffff810ebb7c>] ? cpu_startup_entry+0x19c/0x430
>> [<ffffffff810ebb38>] ? cpu_startup_entry+0x158/0x430
>> [<ffffffff819db767>] rest_init+0x137/0x140
>> [<ffffffff819db635>] ? rest_init+0x5/0x140
>> [<ffffffff822fde18>] start_kernel+0x3af/0x3bc
>> [<ffffffff822fd870>] ? repair_env_string+0x5e/0x5e
>> [<ffffffff822fd5a5>] x86_64_start_reservations+0x2a/0x2c
>> [<ffffffff822fd673>] x86_64_start_kernel+0xcc/0xcf
>>
>> =================================
>> [ INFO: inconsistent lock state ]
>> 3.10.10-rt7 #2 Not tainted
>> ---------------------------------
>> inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
>> swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
>> (&(&(&q->lock)->lock)->wait_lock){?.+.-.}, at: [<ffffffff819f7e98>] rt_spin_lock_slowlock+0x48/0x370
>> {HARDIRQ-ON-W} state was registered at:
>> [<ffffffff810fc94d>] __lock_acquire+0x69d/0x20e0
>> [<ffffffff810feaee>] lock_acquire+0x9e/0x1f0
>> [<ffffffff819f9090>] _raw_spin_lock+0x40/0x80
>> [<ffffffff819f7e98>] rt_spin_lock_slowlock+0x48/0x370
>> [<ffffffff819f89ac>] rt_spin_lock+0x2c/0x60
>> [<ffffffff810ccdd6>] __wake_up+0x36/0x70
>> [<ffffffff8109c5ce>] run_timer_softirq+0x1be/0x390
>> [<ffffffff81092a09>] do_current_softirqs+0x239/0x5b0
>> [<ffffffff81092db8>] run_ksoftirqd+0x38/0x60
>> [<ffffffff810c5d7c>] smpboot_thread_fn+0x22c/0x340
>> [<ffffffff810bbf4d>] kthread+0xcd/0xe0
>> [<ffffffff81a019dc>] ret_from_fork+0x7c/0xb0
>> irq event stamp: 6121390
>> hardirqs last enabled at (6121389): [<ffffffff819f9ae0>] restore_args+0x0/0x30
>> hardirqs last disabled at (6121390): [<ffffffff819f9a2a>] common_interrupt+0x6a/0x6f
>> softirqs last enabled at (0): [< (null)>] (null)
>> softirqs last disabled at (0): [< (null)>] (null)
>>
>> other info that might help us debug this:
>> Possible unsafe locking scenario:
>>
>> CPU0
>> ----
>> lock(&(&(&q->lock)->lock)->wait_lock);
>> <Interrupt>
>> lock(&(&(&q->lock)->lock)->wait_lock);
>>
>> *** DEADLOCK ***
>>
>> 2 locks held by swapper/0/0:
>> #0: (rcu_read_lock){.+.+.+}, at: [<ffffffff8100998a>] kvm_set_irq_inatomic+0x2a/0x4a0
>> #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81038800>] kvm_irq_delivery_to_apic_fast+0x60/0x3d0
>>
>> stack backtrace:
>> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.10-rt7 #2
>> Hardware name: Dell Inc. OptiPlex 990/0VNP2H, BIOS A17 03/14/2013
>> ffffffff8262b550 ffff880223603a40 ffffffff819f177d ffff880223603a90
>> ffffffff819ec532 0000000000000000 ffffffff00000000 ffff880200000001
>> 0000000000000002 ffffffff8201ccc0 ffffffff810f9040 0000000000000000
>> Call Trace:
>> <IRQ> [<ffffffff819f177d>] dump_stack+0x19/0x1b
>> [<ffffffff819ec532>] print_usage_bug.part.36+0x28b/0x29a
>> [<ffffffff810f9040>] ? check_usage_backwards+0x150/0x150
>> [<ffffffff810f9dab>] mark_lock+0x28b/0x6a0
>> [<ffffffff810fcbf9>] __lock_acquire+0x949/0x20e0
>> [<ffffffff811091f2>] ? __module_text_address+0x12/0x60
>> [<ffffffff8110ea8f>] ? is_module_text_address+0x2f/0x60
>> [<ffffffff810b8408>] ? __kernel_text_address+0x58/0x80
>> [<ffffffff8104dbb2>] ? print_context_stack+0x62/0xf0
>> [<ffffffff810feaee>] lock_acquire+0x9e/0x1f0
>> [<ffffffff819f7e98>] ? rt_spin_lock_slowlock+0x48/0x370
>> [<ffffffff819f9090>] _raw_spin_lock+0x40/0x80
>> [<ffffffff819f7e98>] ? rt_spin_lock_slowlock+0x48/0x370
>> [<ffffffff819f7e98>] rt_spin_lock_slowlock+0x48/0x370
>> [<ffffffff819f89ac>] rt_spin_lock+0x2c/0x60
>> [<ffffffff810ccdd6>] __wake_up+0x36/0x70
>> [<ffffffff81003bbb>] kvm_vcpu_kick+0x3b/0xd0
>> [<ffffffff810371a2>] __apic_accept_irq+0x2b2/0x3a0
>> [<ffffffff810385f7>] kvm_apic_set_irq+0x27/0x30
>> [<ffffffff8103894e>] kvm_irq_delivery_to_apic_fast+0x1ae/0x3d0
>> [<ffffffff81038800>] ? kvm_irq_delivery_to_apic_fast+0x60/0x3d0
>> [<ffffffff81009a8b>] kvm_set_irq_inatomic+0x12b/0x4a0
>> [<ffffffff8100998a>] ? kvm_set_irq_inatomic+0x2a/0x4a0
>> [<ffffffff8100c5b3>] kvm_assigned_dev_msi+0x23/0x40
>> [<ffffffff8113cb38>] handle_irq_event_percpu+0x88/0x3d0
>> [<ffffffff810ebb7c>] ? cpu_startup_entry+0x19c/0x430
>> [<ffffffff8113cec8>] handle_irq_event+0x48/0x70
>> [<ffffffff8113f9b7>] handle_edge_irq+0x77/0x120
>> [<ffffffff8104c6ae>] handle_irq+0x1e/0x30
>> [<ffffffff81a035ca>] do_IRQ+0x5a/0xd0
>> [<ffffffff819f9a2f>] common_interrupt+0x6f/0x6f
>> <EOI> [<ffffffff819f9ae0>] ? retint_restore_args+0xe/0xe
>> [<ffffffff810ebb7c>] ? cpu_startup_entry+0x19c/0x430
>> [<ffffffff810ebb38>] ? cpu_startup_entry+0x158/0x430
>> [<ffffffff819db767>] rest_init+0x137/0x140
>> [<ffffffff819db635>] ? rest_init+0x5/0x140
>> [<ffffffff822fde18>] start_kernel+0x3af/0x3bc
>> [<ffffffff822fd870>] ? repair_env_string+0x5e/0x5e
>> [<ffffffff822fd5a5>] x86_64_start_reservations+0x2a/0x2c
>> [<ffffffff822fd673>] x86_64_start_kernel+0xcc/0xcf
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
