Hi Sebastian, now i have a working debian host :) You remember: (Linux target RT.PREEMPT)usb --- RNDIS --- usb <-> (linux:Host debian) So, the next problem is: the machine connect with CDC and not with rndis The target says: g_ether gadget: high-speed config #1: CDC Ethernet (ECM) g_ether gadget: init ecm g_ether gadget: notify connect true g_ether gadget: activate ecm usb0: qlen 10 g_ether gadget: ecm_open usb0: eth_start g_ether gadget: notify connect true g_ether gadget: notify speed 425984000 And the debian host says: usbcore: registered new interface driver rndis_host usb 1-1: USB disconnect, device number 2 cdc_ether 1-1:1.0: eth1: unregister 'cdc_ether' usb-0000:02:03.0-1, CDC Ethernet Device usb 1-1: new high-speed USB device number 3 using ehci_hcd usb 1-1: New USB device found, idVendor=1c2b, idProduct=000b usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: RNDIS/Ethernet Gadget usb 1-1: Manufacturer: Linux 3.10.4-rt1-KTT-V1_AHB with pch_udc cdc_ether 1-1:1.0: eth1: register 'cdc_ether' at usb-0000:02:03.0-1, CDC Ethernet Device, 00:01:84:00:08:15 And I don’t know how to configure it. Do you have an idea for this? Greetings Alex -----Ursprüngliche Nachricht----- Von: Sebastian Andrzej Siewior [mailto:bigeasy@xxxxxxxxxxxxx] Gesendet: Donnerstag, 29. August 2013 20:58 An: Hänel-Baas, Alexander Cc: linux-rt-users Betreff: Re: AW: CONFIG_PREEMPT_RT_FULL an usb gadget please keep the list in Cc. On 08/29/2013 04:36 PM, Hänel-Baas, Alexander wrote: > Hi Sebastian, Hi Alexander, > yes i use a x86 machine with 3.10.4-rt1 patch. > No, there is no other gadget's or usb device active. I meant try another gadget (like storage) or rndis on a linux host where you can debug since Windows isn't that cooperative. > Now I have enabled the lock debug (I hope so), but I can't see a message that the kernel complains about something. > > Yes that the point. In the debugging msg. is no difference between the working or not working situation. > > I attached my kernel config's: > Config_3.10.4_PREEMPT_FULL -> Fully preemptible > Config_3.10.4_PREEMPT_LL -> Low-Latency > > The other files are the corresponding dmesg. > preempt_full_dmesg.txt > preempt_ll_dmesg.txt Sorry, I have currently no time look at those, I'm on the run… > > Ok, I look for another linux machine to connect: (Traget: linux) <-> > usb --- RNDIS --- usb <-> (linux:Host) Good. Note that that most gadgets attach RDNIS as an additional function that means under normal circumstances Linux ignores RNDIS and goes for CDC. > Thank you for help, > > Alex Sebastian ��.n��������+%������w��{.n�����{�����ǫ���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
