Re: [PATCH RT 2/2] fix printk flush of messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patches were tested on an ARM panda board for linux-3.4-rc5-rt6.

The panda board has a compile error in linux-3.4-rc5, which is fixed
by commit 13176a89e1c4a0011bd9f576730b0338ecb619ff in linux-3.4-rc6.

Without the patch, the printk() output from the following commands
does not appear on the console, until flushed by 'echo >/dev/console'

   echo h >/proc/sysrq-trigger
   echo p >/proc/sysrq-trigger
   echo m >/proc/sysrq-trigger

With the patch, the output flushes to the console immediately.

-Frank

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [RT Stable]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux