Re: task switch from net-rx to idle when there is napi processing to be done

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/26/2012 07:29 AM, Steven Rostedt wrote:
On Wed, 2012-01-25 at 03:30 -0800, Venkat Subbiah wrote:
On 01/25/2012 12:55 AM, Uwe Kleine-König wrote:
Hello,

On Tue, Jan 24, 2012 at 06:39:34PM -0800, Venkat Subbiah wrote:
In the process of debugging a napi ethernet driver performance
issue, what I am noticing is

1. While the driver is in the middle of a napi packet processing
loop, there is a task switch from
sirq-net-rx to idle even though there is pending napi processing to be done.
I didn't check your logs below, but maybe this is related to the default
settings in /proc/sys/kernel/sched_rt_period_us and
/proc/sys/kernel/sched_rt_runtime_us? That is 0.05s per second is
reserved for non-RT tasks tasks such that a run-away realtime process
will not lock up the machine.

To verify that, try

	echo -1>   /proc/sys/kernel/sched_rt_runtime_us

.
Thanks for you response. That was it. Setting this to -1 does the expected.
Note, you should also have seen a warning in the logs when an RT task is
throttled. Did you see such a thing?
I didn't get to the console,but it is in the kernel logs.

-- Steve




--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [RT Stable]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux