Hi Darren,
i had the same problem on a Z530 with all RT kernels 3.0. I didn't
search for the reason, however the problem went away when i used the
"Intel Atom" at the "Processor family" option.
Best regards,
Simon
On 03.10.2011 20:15, Darren Hart wrote:
I have a couple of platforms (including the n450 dev board from kernel
summit) where an x86 32b build of 3.0.4-rt14 fails to shutdown with
"shutdown -h now". reboot works properly, and shutdown works with
maxcpus=1 (otherwise the n450 has 2 hardware threads).
The last messages to hit the console are:
e1000e 0000:04:00.0: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
ehci_hcd 0000:00:1a.7: PCI INT C disabled
I am booting from a USB stick. If I install to a SATA connected SSD, the
shutdown still fails, but I don't see the "INT X disabled" messages.
Has anyone run into this with a known workaround? Any thoughts on where
to start digging?
.config attached.
begin:vcard
fn:Simon Sudler
n:Sudler;Simon
org;quoted-printable:Fraunhofer IIS;Nachrichten=C3=BCbertragung - Communications Department
adr:;;Am Wolfsmantel 33;Erlangen;;91058;Deutschland
email;internet:Simon.Sudler@xxxxxxxxxxxxxxxxx
title:Dipl.-Ing.
tel;work:+49 9131 776-6309
tel;fax:+49 9131 776-6399
tel;cell:+49 160 5323753
url:www.iis.fraunhofer.de
version:2.1
end:vcard
