> > > We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be > > > downloaded from the location: > > > > > > http://rt.et.redhat.com/download/ > > > > Compiles fine but I run into another problem. On startup kernel oopses > > early and this 'oops' loops over and over again on the screen until you > > shut down the box. So I can't (easily) capture the output. I tried different > > boot_delay values but it seems that it doesn't work as intended. Seems that > > it delays only the first printk from oops, then the rest loops over the screen > > without delay - again it becomes unreadable. I used my usual config with a bunch > > of debug options enabled so that maybe is not real rt system case. Also tried to > > bisect it with quilt but that is hard. Lots of patches depends on another patches > > so bisection brakes things. I'll look into this tommorow and reply if I get > > anything substantial. > > > > I attached my config in case anybody wants to try to reproduce that. > > > > Turn off LOCKDEP and see if you still have the same problems. This might > be fixed with Daniel's patch. Ok. It works. I found this in dmesg: BUG: swapper:0 task might have lost a preemption check! Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3 [<c010386b>] show_trace_log_lvl+0x1d/0x3b [<c01042f3>] show_trace+0x12/0x14 [<c0104a2f>] dump_stack+0x6a/0x70 [<c0115419>] preempt_enable_no_resched+0x5c/0x5e [<c0100e35>] cpu_idle+0x6d/0x82 [<c0323b6e>] rest_init+0x66/0x68 [<c043aba6>] start_kernel+0x20c/0x276 [<00000000>] 0x0 ======================= --------------------------- | preempt count: 00000000 ] | 0-level deep critical section nesting: ---------------------------------------- Box runs fine though. Regards, Mariusz - To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
