status: EXPERIMENTAL Use on your own risk. What works: uart2 mmc emmc sd card usb2 What doesn't work: vop hdmi ethernet Not tested: adc key av bt ir spdif wifi No support in mainline: usb3 front display Problems: U-boot only starts on emmc, then loads kernel from sd card. Need pd_ignore_unused and clk_ignore_unused in command line to prevent a crash. Missing power domains? Hdmi hotplug detects DVI modes, but marks them all BAD. A fixed display mode in the command line also gives no penguins on the screen. Etc. Johan Jonker (2): dt-bindings: arm: rockchip: add A95X Z2 description arm64: dts: rockchip: add rk3318 A95X Z2 board .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts | 417 +++++++++++++++++++++ 3 files changed, 423 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts -- 2.11.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
