On 6/11/20 4:06 AM, Abhishek Pandit-Subedi wrote: > Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup > and pinctrl block to devicetree so the btmrvl driver can correctly > configure the wakeup interrupt. > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx> > Reviewed-by: Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > --- > The Veyron Mighty Chromebook (rk3288 based board) is missing the wake > configuration for Bluetooth. Without this change, the wake irq was not > configurable and wake on Bluetooth was broken. > > I verified this change with additional changes in the Bluetooth driver > (the series is at https://patchwork.kernel.org/cover/11599101/). The > driver changes are not necessary for this dts change and shouldn't block > it. > > > arch/arm/boot/dts/rk3288-veyron-jaq.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts > index 171ba6185b6d39..976c0c17a71199 100644 > --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts > +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts > @@ -51,6 +51,21 @@ &sdmmc { > &sdmmc_bus4>; > }; > > +&sdio0 { For nodes: Sort things without reg alphabetical first, then sort the rest by reg address. &sdio0 goes above &sdmmc. > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&gpio4>; > + interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <13>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_l>; > + }; > +}; > + > &vcc_5v { > enable-active-high; > gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
